Utilitech DLS30-06N27D1E-WH-6

Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight User Manual

Produit terminéview

This manual provides instructions for the Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight. This product is designed to replace existing recessed lighting fixtures, offering energy-efficient LED illumination. Each pack contains six dimmable downlights, providing a soft white light suitable for various indoor applications.

Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight 6-pack

Image: Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight, shown as a 6-pack.

Caractéristiques principales :

  • Designed for 5-inch or 6-inch new construction and remodel housings.
  • Integrated LED technology: 10.5-watt (65-watt equivalent), 650 lumens, 2700K soft white light.
  • Longue durée de vie d'environ 50 000 heures.
  • Energy Star certified for energy efficiency.
  • Includes a medium-based screw-in adapter for easy connection.
  • Equipped with friction clips and spring clips for versatile installation.

Configuration et installation

Consignes de sécurité : Before beginning installation, ensure the power to the fixture location is turned off at the circuit breaker. Consult a qualified electrician if you are unfamiliar with electrical wiring.

  1. Prepare the Existing Housing: Ensure your existing recessed housing is compatible with 5-inch or 6-inch retrofit downlights. Remove any existing bulb and trim from the housing.
  2. Connectez l'adaptateur : Screw the medium-based screw-in adapter from the LED downlight into the existing socket of your recessed housing.
  3. Fixez le spot encastré : Gently push the LED downlight into the recessed housing. The friction clips or spring clips (depending on your housing type) will secure the fixture in place. Ensure the downlight sits flush with the ceiling.
  4. Restaurer l'alimentation : Une fois le spot encastré correctement installé, rétablissez le courant au niveau du disjoncteur.
  5. Fonctionnalité de test : Allumez l'interrupteur pour vérifier son bon fonctionnement.

Mode d'emploi

The Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight operates like a standard light fixture once installed. It is designed to be dimmable, allowing you to adjust light output when connected to a compatible dimmer switch.

  • Activation/désactivation : Use your existing wall switch to turn the downlight on or off.
  • Atténuation: If connected to a compatible dimmer switch, adjust the dimmer control to achieve your desired brightness level. Ensure the dimmer switch is rated for LED lighting to prevent flickering or damage.

Entretien

The Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight requires minimal maintenance due to its integrated LED design.

  • Nettoyage: Pour nettoyer le luminaire, assurez-vous qu'il est hors tension. Utilisez un chiffon doux, sec ou légèrement rêche.amp cloth. Avoid abrasive cleaners, solvents, or cleaning agents containing alcohol, as these can damage the finish or electrical components.
  • Remplacement des LED : The LED light source is integrated into the fixture and is not user-replaceable. The fixture is designed for a long operational life of approximately 35,000 hours.

Dépannage

If you encounter issues with your downlight, refer to the following common troubleshooting steps:

  • La lumière ne s'allume pas :
    • Vérifiez si l'interrupteur d'alimentation est en position ON.
    • Vérifiez que le disjoncteur du luminaire n'est pas déclenché.
    • Ensure the medium-based screw-in adapter is securely tightened into the housing socket.
    • Confirm that the downlight is properly seated and making electrical contact within the housing.
  • La lumière clignote ou s'atténue de façon incorrecte :
    • Ensure you are using an LED-compatible dimmer switch. Older incandescent-only dimmers may cause flickering or improper dimming.
    • Check for loose connections at the dimmer switch or the fixture.
  • La lumière n'est pas assez forte :
    • If using a dimmer, ensure it is set to the maximum brightness level.
    • Verify that the fixture is receiving full 110V power.

Si ces étapes ne résolvent pas le problème, contactez le service client pour obtenir de l'aide supplémentaire.

Caractéristiques

Numéro de modèleDLS30-06N27D1E-WH-6
MarqueUtilitech
Type de source lumineuseLED intégrée
Quoitage (Équivalent)65 watts
Wat réeltage10.5 watts
Luminosité650 lumens
Température de couleur2700 Kelvin (blanc doux)
GradableOui (avec un variateur compatible)
Durée de vie35,000 heures
Voltage110 volts
Type d'installationRetrofit (for 5-inch or 6-inch housings)
Composants inclusMounting Hardware, Medium-based screw-in adapter
MatérielMetal, Plastic (Shade)
CouleurBlanc
Utilisation intérieure/extérieureIntérieur
Dimensions du produit (emballage)5 x 7 x 5 pouces
Poids de l'article (emballage)3.5 livres

Informations sur la garantie

Specific warranty details for the Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight are typically provided with the product packaging or can be obtained from the manufacturer's official webVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.

Assistance clientèle

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Utilitech product, please refer to the contact information provided on the product packaging or visit the official Utilitech webSite de ressources pour le support client.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.