Progress Lighting Tobin Collection 1-Light Etched White Glass Modern Bath Vanity Light

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Tobin Collection 1-Light Etched White Glass Modern Bath Vanity Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Tobin vanity light features a modern design with tubular arms and an etched white glass shade, finished in Brushed Nickel. It is designed to provide functional and aesthetic lighting for your bathroom space.

Figure 1: Progress Lighting Tobin 1-Light Vanity Light.

Consignes de sécurité

• AVERTISSEMENT: Risque de choc électrique. Coupez l'alimentation au niveau du tableau électrique ou du disjoncteur avant toute installation ou intervention.
• Tous les raccordements électriques doivent être conformes aux codes et règlements locaux, ou au Code national de l'électricité (NEC). En cas de doute sur les raccordements électriques appropriés, veuillez contacter un électricien qualifié.
• Ce luminaire est destiné à un usage intérieur uniquement.
• N'utilisez que le type d'ampoule et la puissancetage specified for this fixture. Exceeding the recommended wattagcela peut provoquer une surchauffe et des dommages.
• Manipulez les composants en verre avec précaution pour éviter les bris.
• Ensure the fixture is securely mounted to a structural element of the building.
• This product is UL Listed, ensuring it meets specific safety standards.

Contenu du colis

Déballez soigneusement votre nouvel appareil et disposez toutes les pièces sur une surface dégagée. Vérifiez que tous les composants listés ci-dessous sont présents avant de jeter les emballages.

• Fixture Body (with tubular arm and backplate)
• Abat-jour en verre blanc gravé
• Mounting Hardware (crossbar, mounting screws, wire nuts)
• Fiche d'installation

Caractéristiques

Figure 2 : Dimensions du produit.

Configuration et installation

Avant de commencer : Ensure power is turned off at the circuit breaker. Read all instructions thoroughly.

1. Préparez la surface de montage : Ensure the electrical box is securely installed and capable of supporting the fixture's weight.
2. Fixer la plaque de montage : Secure the mounting crossbar to the electrical box using the provided screws.
3. Connexions filaires : Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
4. Monter le luminaire : Carefully align the fixture's backplate with the mounting screws on the crossbar. Secure the fixture in place with the decorative nuts or screws.
5. Installez l'abat-jour en verre : Place the etched white glass shade over the socket and secure it according to the specific design (e.g., with a threaded ring or set screws).
6. Installez l'ampoule : Insert one E26 medium base bulb (max 100W incandescent or equivalent LED) into the socket.

This fixture can be mounted with the light facing upwards or downwards, depending on your preference and desired lighting effect.

Figure 3: Mounting Options (Up or Down).

Guide vidéo d'installation

Mode d'emploi

Once installed, restore power at the circuit breaker. The fixture is operated via a standard wall switch (not included). If connected to a compatible dimmer switch, the light output can be adjusted. Ensure the bulb used is dimmable if you intend to use a dimmer switch.

Entretien

• Nettoyage: Always turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
• Abat-jour en verre : The etched white glass shade can be removed for cleaning. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
• Remplacement de l'ampoule : Ensure power is off and the bulb has cooled before attempting to replace it. Use an E26 medium base bulb, not exceeding 100 watts.

Dépannage

Garantie et assistance

Ce produit Progress Lighting est couvert par une garantie. Garantie limitée d'un an. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting website.