1. Introduction

Thank you for choosing the Utilitech Full Motion TV Wall Mount, Model UT70C. This manual provides essential instructions for safe and proper installation, operation, and maintenance of your TV wall mount. Please read this manual thoroughly before installation and retain it for future reference.

This wall mount is designed to securely hold flat-panel televisions ranging from 24 to 65 inches in size, with a maximum weight capacity of 70 lbs (31.75 kg). Its full-motion articulating design allows for optimal viewangles d'inclinaison.

2. Informations importantes sur la sécurité

WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Capacité de poids : Ne pas dépasser la capacité de charge maximale de 31.75 kg (70 lb). Ce support est conçu pour être utilisé uniquement avec les poids maximums indiqués. L'utilisation avec des produits plus lourds que les poids maximums indiqués peut entraîner une instabilité et des risques de blessure.
• Taille du téléviseur: This mount is designed for televisions between 24 and 65 inches. Ensure your TV falls within this range.
• Structure du mur : The wall must be capable of supporting five times the weight of the television and the mount combined. Ensure the mounting surface is structurally sound.
• Outils: Utilisez les outils appropriés pour l'installation. Portez toujours des lunettes de sécurité.
• Assemblée: Assemble the product exactly according to the instructions. Incorrect assembly may result in serious injury.
• Enfants: Tenir les enfants éloignés pendant l'installation. Les petites pièces peuvent présenter un risque d'étouffement.
• Vérifier les connexions : After installation, ensure all connections are secure and safe to use.

3. Configuration et installation

3.1 Contenu du paquet

Verify that all components are present and undamaged. Refer to the parts list included in your product packaging.

3.2 Outils nécessaires (non inclus)

• Détecteur de montants (pour l'installation de montants en bois)
• Percez avec les forets appropriés
• Niveau
• Tournevis cruciforme
• clé à douille ou clé réglable
• Crayon
• Mètre à ruban

3.3 Choix d'un emplacement de montage

Select a location on the wall that can support the weight of your TV and the mount. Ensure there are no hidden electrical wires, water pipes, or other hazards behind the wall where you plan to drill.

3.4 étapes d'installation

1. Fixez les supports de télévision au téléviseur : Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the correct screws, washers, and spacers from the provided hardware kit that fit your TV. Attach the two vertical TV brackets to the back of your TV using these fasteners. Ensure the brackets are centered and securely tightened.
2. Locate Wall Studs (for wood stud walls): Utilisez un détecteur de montants pour repérer les bords et le centre de deux montants en bois adjacents. Marquez le centre des montants à la hauteur souhaitée pour le haut de votre téléviseur.
3. Fixer la plaque murale au mur : Hold the wall plate against the wall at the marked height, ensuring it is level using a spirit level. Mark the drilling locations through the holes on the wall plate.
4. Percer des trous pilotes : For wood studs, drill pilot holes into the center of the marked studs using an appropriate drill bit (refer to the hardware guide for specific sizes). For concrete/brick walls, use a masonry drill bit and insert wall anchors (if provided and suitable for your wall type).
5. Plaque murale sécurisée : Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly, but do not overtighten.
6. Fixez le téléviseur à la plaque murale : With assistance, carefully lift the TV (with the attached brackets) and hook the brackets onto the wall plate. Ensure the TV is securely seated on the mount.
7. Fixez le téléviseur au support : Use the safety screws or locking mechanisms (if present) on the TV brackets to secure the TV to the wall plate, preventing accidental dislodgement.

Image: The Utilitech Full Motion TV Wall Mount (Model UT70C) as depicted on its packaging, showcasing its articulating design and compatibility for 24-65 inch TVs with a maximum weight of 70 lbs.

4. Mode d'emploi

The Utilitech Full Motion TV Wall Mount allows for flexible positioning of your television to achieve optimal viewangles d'inclinaison.

• Étendre/Rétracter : Gently pull or push the TV screen to extend or retract the mount arm from the wall.
• Pivot: Rotate the TV screen horizontally to the left or right to adjust the viewangle de vue.
• Inclinaison: The mount may allow for vertical tilt adjustment. Loosen any tilt adjustment knobs or screws (if present) on the TV brackets, adjust the tilt to your desired angle, and then re-tighten to secure the position.
• Réglage du niveau: Some mounts offer post-installation leveling. If your mount has this feature, follow the specific instructions in the included hardware guide to fine-tune the TV's horizontal level.

Always move the TV smoothly and avoid sudden, forceful movements. Ensure no cables are pinched or strained during adjustments.

5. Entretien

• Contrôles réguliers : Vérifiez régulièrement le serrage et la fixation de toutes les vis et connexions. Resserrer si nécessaire.
• Nettoyage: Nettoyez le support avec un chiffon doux et sec. N’utilisez pas de nettoyants abrasifs ni de solvants, car ils pourraient endommager la finition.
• Lubrification: The articulating joints are designed for smooth operation. If movement becomes stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts, avoiding contact with electrical components.
• Dommage: If any part of the mount becomes damaged or worn, discontinue use and contact customer support for replacement parts or professional advice.

6. Dépannage

• Le téléviseur n'est pas de niveau :
  • Ensure the wall plate was installed level. If not, it may need to be re-installed.
  • Check if your mount has a post-installation leveling feature and adjust accordingly.
  • Verify that the TV brackets are securely and evenly attached to the TV.
• Difficulté à déplacer le téléviseur :
  • Check for any obstructions or pinched cables.
  • Ensure all adjustment knobs or screws (if applicable for tilt/swivel tension) are not overtightened.
  • Apply a small amount of silicone lubricant to the articulating joints if they feel stiff.
• La montagne semble instable :
  • Retirez immédiatement le téléviseur de son support.
  • Re-check all wall plate mounting bolts and TV bracket screws for tightness.
  • Verify that the wall structure is adequate and that the correct anchors/fasteners were used for your wall type.
  • Assurez-vous que le poids du téléviseur ne dépasse pas la capacité maximale du support.

7. Spécifications

8. Garantie et assistance

For warranty information or technical support, please refer to the warranty card included with your product or contact Utilitech customer service directly. Keep your purchase receipt as proof of purchase.

For assistance, please visit the official Utilitech webconsultez le site ou contactez leur service client.