1. Plus deview
The Idatalink Compustar Blade-AL is a universal 'all-in-one' integration cartridge designed for seamless integration with Blade-compatible remote start modules, vehicle security, and convenience products. This module acts as an essential intermediary between your remote start system and the vehicle's computer, enabling remote start functionality without compromising factory security. It supports over 4000 vehicle models from 1997 to date, including exclusive KLON firmware applications.
Figure 1: Idatalink Compustar Blade-AL module with its associated wiring harness.
2. Setup and Initial Programming
Before installation, the Blade-AL module requires programming with vehicle-specific firmware. This process is performed using a computer and the Idatalink WebMise à jour des liens.
2.1 Composants requis
- Computer (Windows PC recommended for Internet Explorer compatibility)
- Idatalink ADS-USB (sold separately)
- Compustar Controller (e.g., CM7200)
- Blade-AL Module
Figure 2: The Idatalink ADS-USB cable, essential for module programming.
2.2 Enregistrement du compte
Créez un compte sur le programme officiel website: compustar.idatalink.com. It is recommended to complete registration using Internet Explorer and allow ActiveX to be enabled if prompted by the browser.
2.3 Connexion matérielle
- Dock your Blade-AL module into the dedicated slot on your Compustar controller. Ensure it is securely seated.
- Plug the ADS-USB cable into an available USB port on your computer.
- Connect the cable labeled 'Idatalink Module' from the ADS-USB to the black RS232 data port on the Compustar controller.
Figure 3: Inserting the Blade-AL module into the Compustar controller.
2.4 Programmation du logiciel
Follow these steps to program your module:
- Lancez Internet Explorer et accédez à compustar.idatalink.com.
- Select the 'Flash Your Module' option on the website.
- Once the hardware is detected, you will be directed to the programming home screen.
- Under 'Vehicle Selection', choose the correct year, make, and model of the vehicle you will be working on.
- You can either configure specific features for the Blade-AL module or select 'Flash' to load the default settings.
- The site will confirm 'Flashing Completed!' and provide the appropriate installation guide for download.
- While the controller is still plugged in, select the 'Remote Starter' tab. Here, you can configure additional features such as remote start run time, programmable outputs, and double pulse unlock. These settings can also be adjusted in the vehicle using an OP500 programmer.
- This tab also allows you to update the firmware for the controller when available.
Video 1: Idatalink BLADE Remote Start/Security Bypass Module Flashing. This video demonstrates the process of flashing and updating your Blade module and Compustar controller using the WebMise à jour des liens.
3. Fonctionnement
Once the Blade-AL module and Compustar controller are properly flashed and configured, they will enable remote start and other convenience features for your vehicle. The module seamlessly integrates with your vehicle's immobilizer system, allowing the remote starter to function without requiring a spare key to be left inside the vehicle.
Specific operational details, such as remote start sequence, lock/unlock functions, and trunk release, will depend on the features configured during the programming process and the capabilities of your Compustar remote starter system.
Figure 4: The Blade-AL module facilitates remote functions via the vehicle's key fob or remote starter.
4. Entretien
The Idatalink Compustar Blade-AL module is designed for long-term reliability and typically requires minimal maintenance. To ensure optimal performance and longevity:
- Garder au sec : Évitez d'exposer le module à l'humidité ou aux liquides.
- Contrôle de la température : Do not expose the module to extreme temperatures, either hot or cold.
- Protection physique : Ensure the module is securely mounted within the vehicle to prevent physical damage from vibrations or impacts.
- Mises à jour du micrologiciel : Vérifiez périodiquement le compustar.idatalink.com website for new firmware releases that may offer improved performance, bug fixes, or expanded vehicle compatibility.
5. Dépannage
If you encounter issues with your Blade-AL module or Compustar system, consider the following common points:
- Module Not Detected / Programming Issues:
Ensure the ADS-USB cable is correctly connected to both the computer and the Compustar controller. Verify that you are using Internet Explorer for the Weblink Updater and that ActiveX is enabled. If issues persist, try a different USB port or computer. - Démarrage à distance non fonctionnel :
Confirm that the Blade-AL module has been correctly flashed with the appropriate firmware for your specific vehicle year, make, and model. Check all wiring connections between the module, controller, and vehicle. Verify that the remote start features are enabled in the module's configuration settings. - Compatibilité du véhicule :
While the Blade-AL is universal, specific vehicle models require precise firmware. Ensure the correct firmware is loaded. - Installation professionnelle :
The installation and programming of this module can be complex. Une installation professionnelle est fortement recommandée. Many issues arise from incorrect wiring or improper firmware flashing. If you are not experienced with car electronics, seek assistance from a certified installer. -
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.