Table LED portable Flos Bellhop à batterie Lamp Manuel d'utilisation

1. Introduction

This manual provides essential instructions for the safe and efficient use of your Flos Bellhop Battery Portable LED Table LampVeuillez lire attentivement ce manuel avant d'utiliser l'appareil et conservez-le pour toute consultation ultérieure.

The Flos Bellhop Battery is a modern, portable LED table lamp designed for indoor use. It features a polycarbonate construction, an integrated rechargeable battery, and a dimmable light source, offering flexibility and ambient lighting.

2. Consignes de sécurité

• Assurez-vous que le lamp est placé sur une surface stable et plane pour éviter tout basculement.
• This product is designed for indoor use only (IP20 rating). Do not expose to water, high humidity, or extreme temperatures.
• Do not attempt to open or modify the lamp. Servicing should only be performed by qualified personnel.
• Keep away from direct heat sources and flammable materials.
• Use only the charging cable and adapter provided or specified by Flos.
• Ne regardez pas directement la source lumineuse LED pendant des périodes prolongées.
• Jetez la batterie et lamp conformément aux réglementations locales à la fin de son cycle de vie.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• Table LED portable Flos Bellhop à batterie Lamp
• Charging Cable (USB-C or similar, specific type not detailed in provided data)
• Manuel de l'utilisateur (ce document)

4. Installation

4.1 Charge initiale

Avant la première utilisation, chargez complètement le lamp. Connect the charging cable to the lamp's charging port and plug the other end into a suitable power source (e.g., USB wall adapter). The charging indicator (if present, refer to visual cues on the lamp) will show the charging status. A full charge typically takes several hours.

4.2 Placement

Place the Bellhop lamp on any flat, stable surface indoors. Its portable design allows for flexible placement in various rooms, such as living areas, bedrooms, or offices. Ensure it is not exposed to moisture or direct sunlight.

Image 1: The Flos Bellhop Battery Portable LED Table Lamp in Grey. This image displays the lamp's sleek, mushroom-like design with its cylindrical base and domed shade, highlighting the central power/dimmer button.

5. Mode d'emploi

5.1 Mise sous/hors tension

Locate the button on the base of the lamp. Press the button once to turn the lamp Appuyez à nouveau pour allumer le lamp désactivé.

5.2 Fonction de gradation

The Bellhop lamp features an integrated dimmer. While the lamp is on, press and hold the button to cycle through different brightness levels. Release the button when the desired brightness is reached. The lamp will typically remember the last brightness setting when turned off and on again.

5.3 Autonomie de la batterie

Le lamp is powered by a rechargeable battery, offering cordless operation. Battery life varies depending on the brightness level selected. When the battery is low, the light output may decrease, or an indicator light (if present) may signal the need for recharging.

Image 2: Two Flos Bellhop lamps illuminating an outdoor deck area at dusk. This image demonstrates the lamp's portability and ability to provide ambient lighting in various settings, though it is rated for indoor use.

6. Entretien

6.1 Nettoyage

Pour nettoyer le lamp, ensure it is turned off and disconnected from the charging cable. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate finish.

6.2 Entretien de la batterie

Pour prolonger la durée de vie de la batterie, évitez de la décharger complètement.amp fréquemment. Rechargez le lamp regularly, even if not in constant use. If storing the lamp for an extended period, ensure it is partially charged (e.g., 50%) and recharge it every few months.

Source lumineuse à LED 6.3

The Flos Bellhop Battery lamp uses an integrated LED light source. The LED is not user-replaceable. If the LED fails, contact Flos customer support for assistance.

7. Dépannage

• Lamp ne s'allume pas :
  • Assurez-vous que la batterie est chargée. Connectez le lamp to its charger and allow it to charge for at least 30 minutes before attempting to turn it on again.
  • Vérifiez que le câble de chargement et l'adaptateur secteur fonctionnent correctement.
• Lamp does not dim:
  • Ensure you are pressing and holding the button to activate the dimming function, not just pressing it briefly.
• Autonomie courte de la batterie :
  • Battery life is shorter at higher brightness settings. Try using a lower brightness level.
  • Assurez-vous que le lamp is fully charged before use. Over time, rechargeable batteries may experience reduced capacity.
• Problèmes de charge :
  • Check that the charging cable is securely connected to both the lamp et la source d'alimentation.
  • Try a different USB power adapter or charging port.

If problems persist, contact Flos customer support.

8. Spécifications

Image 3: A technical diagram illustrating the dimensions of the Flos Bellhop lamp. It shows a diameter of 125 mm (4.9 inches) and a height of 210 mm (8.26 inches).

9. Garantie et assistance

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Flos webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.