Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LTS LTCMIP7342W-28M Platinum Network Vandal Dome IP Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. Keep this manual for future reference.
The LTS LTCMIP7342W-28M is a 4MP high-definition network vandal dome IP camera designed for robust surveillance applications. It features a 2.8mm fixed lens, True WDR (120dB), Matrix IR 2.0 with up to 100 feet range, and supports H.265/H.265+/H.264/H.264+ video compression. It is rated IP67 for weather resistance and IK10 for vandal resistance, making it suitable for outdoor use. The camera also includes a MicroSD slot supporting up to 128GB for local storage and can be powered by DC 12V or Power over Ethernet (PoE).
Contenu du colis
Vérifiez que tous les éléments sont présents dans l'emballage avant de procéder à l'installation.
- LTS LTCMIP7342W-28M Platinum Network Vandal Dome IP Camera
- Gabarit de perçage
- Vis de fixation et chevilles
- Clé hexagonale
- Kit de connecteur étanche
- Guide de démarrage rapide (reportez-vous à ce manuel pour des instructions détaillées)
Image: Contents of the camera package. This includes a drill template, mounting hardware (screws and wall plugs), a hex wrench for adjustments, and a waterproof connector kit for network cables. These components are essential for proper installation.
Installation
1. Précautions de sécurité
- Assurez-vous que l’alimentation est débranchée avant l’installation ou l’entretien.
- Use only specified power adapters (DC 12V) or PoE (Power over Ethernet) compliant equipment.
- Évitez d'exposer l'appareil photo à des températures extrêmes, à l'humidité ou à des environnements corrosifs.
- Do not attempt to disassemble the camera. Refer all servicing to qualified personnel.
2. Caméra terminéeview
Image: Devant view of the LTS LTCMIP7342W-28M dome camera. This image shows the main body of the camera with its dome cover, indicating its compact and discreet design.
Image: Côté view of the LTS LTCMIP7342W-28M dome camera, showing the attached cables for power and network connectivity. This view highlights the integrated cable management for installation.
3. Wiring and Connectivity
The LTCMIP7342W-28M camera primarily uses a network cable for both data and power (PoE). It is not compatible with traditional DC power and BNC video connections.
Image: This diagram illustrates the correct and incorrect wiring methods. On the left, a network cable (RJ45) is circled in green, indicating compatibility for both video and Power over Ethernet (PoE). On the right, DC power and BNC video connectors are circled in red, indicating they are not compatible with this camera model.
- Connexion réseau: Connect a standard Ethernet cable (Cat5e or Cat6) from the camera's RJ45 port to a PoE-enabled switch or NVR. If not using PoE, connect to a standard network switch and provide 12V DC power separately.
- Pouvoir: The camera supports Power over Ethernet (PoE) or a 12V DC power supply. Ensure the power source meets the camera's requirements.
- Connecteur étanche : Use the provided waterproof connector kit for outdoor installations to protect the RJ45 connection from moisture.
4. Montage de la caméra
- Préparez la surface de montage : Choose a suitable location, typically a ceiling or wall, ensuring it can support the camera's weight.
- Utilisez le gabarit de perçage : Place the provided drill template on the desired mounting surface. Mark the positions for the mounting screws and cable routing hole.
- Trous de forage : Drill pilot holes for the mounting screws (typically 5.5mm diameter for expansion screws) and a larger hole for cable routing, if necessary.
- Acheminer les câbles : Pass the network cable through the cable routing hole.
- Fixez la base de la caméra : Align the camera base with the drilled holes and secure it using the provided mounting screws and wall plugs.
- Ajuster l'angle de la caméra : Loosen the adjustment screws (if applicable) to position the camera lens for the desired viewAjuster l'angle. Serrer les vis une fois le réglage effectué.
Opérationnel
1. Initial Power-Up and Network Configuration
- After connecting the camera to power and the network, it will boot up. This may take a few minutes.
- Use the manufacturer's IP search tool (e.g., SADP Tool) to discover the camera's IP address on your network.
- Accédez aux web interface en saisissant son adresse IP dans un web navigateur.
- Follow the on-screen prompts to set a strong password for the camera (if it's a new installation or reset).
- Configure network settings (IP address, subnet mask, gateway, DNS) as required by your network infrastructure.
2. Paramètres vidéo
- Résolution: The camera supports up to 4MP (2560x1440) resolution at 30 frames per second. Adjust as needed for bandwidth and storage considerations.
- Compression: Utilize H.265+ or H.265 for efficient video storage and bandwidth usage. H.264+ and H.264 are also supported.
- WDR (large plage dynamique) : Enable True WDR (120dB) in challenging lighting conditions to balance bright and dark areas in the image.
- Vision nocturne : The camera features Matrix IR 2.0 with a range up to 100 feet. IR LEDs automatically activate in low light.
3. Enregistrement et stockage
- Enregistrement NVR : Connect the camera to a compatible Network Video Recorder (NVR) for continuous or event-based recording.
- Carte MicroSD : Insert a MicroSD card (up to 128GB) into the camera's slot for local storage. Configure recording schedules and event triggers via the web interface.
- Détection de mouvement : Set up motion detection zones and sensitivity to trigger recordings or alerts.
4. Accès à distance
Pour télécommande viewing, configure port forwarding on your router or use a P2P/Cloud service provided by the manufacturer (if available) to access the camera feed via a mobile app or client software.
Entretien
- Nettoyage des lentilles : Nettoyez régulièrement l'objectif et le dôme de l'appareil photo avec un chiffon doux et sec.amp Utilisez un chiffon. Évitez les nettoyants abrasifs qui pourraient rayer la surface.
- Mises à jour du micrologiciel : Vérifiez le fabricant website for firmware updates to ensure optimal performance and security. Follow update instructions carefully.
- Inspection des câbles : Regularly inspect all cables and connections for signs of wear or damage, especially in outdoor installations.
- Contrôles environnementaux : Veillez à ce que l'environnement de la caméra reste dans les plages de température et d'humidité de fonctionnement spécifiées.
- Gestion des mots de passe : Change passwords regularly and use strong, unique passwords for enhanced security.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Aucun flux d'images/vidéos | No power; Network cable disconnected; Incorrect IP address; Camera malfunction. | Check power supply/PoE connection; Verify network cable is securely connected; Use IP search tool to find camera; Contact technical support if malfunction suspected. |
| Mauvaise qualité d'image | Dirty lens/dome; Low light conditions; Incorrect video settings; Network bandwidth issues. | Clean lens/dome; Ensure IR is active in low light; Adjust resolution, WDR, and other image settings; Check network connection speed. |
| Impossible d'accéder à la caméra à distance | Incorrect port forwarding; Firewall blocking access; Dynamic IP address changed; P2P/Cloud service offline. | Verify router port forwarding rules; Check firewall settings on router/NVR; Use DDNS service for dynamic IPs; Check status of P2P/Cloud service. |
| La carte SD n'enregistre pas | SD card full or faulty; Incorrect recording schedule; SD card not formatted. | Check SD card status and remaining space; Format SD card via camera interface; Verify recording schedule and event triggers. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Modèle | LTCMIP7342W-28M |
| Résolution de capture vidéo | 4 MP (2560x1440) |
| Fréquence d'images | 30 images par seconde |
| Lentille | Lentille fixe 2.8mm |
| Le WDR | True WDR 120dB |
| Portée IR | Up to 100 feet (Matrix IR 2.0) |
| Éclairage minimal | 0.018 Lux @ F1.6 |
| Compression vidéo | H.265, H.265+, H.264, H.264+ |
| Stockage | MicroSD Slot (up to 128GB) |
| Alimentation électrique | DC 12V, PoE (802.3af) |
| Protection contre les intrusions | IP67 |
| Résistance au vandalisme | IK10 |
| Technologie de connectivité | Filaire (Ethernet) |
| Type de montage | Montage au plafond |
| Température de fonctionnement | (Refer to manufacturer's full datasheet for exact range) |
| Dimensions | Dimensions approximatives de l'emballage : 7 x 7 x 7 pouces |
| Poids | Environ 2.5 livres |
Garantie et assistance
For warranty information, technical support, and service inquiries, please contact your authorized TSL dealer or visit the official TSL webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.
Fabricant: LTS
Marque: TSL