Manuel d'utilisation du haut-parleur programmable vocal avec détecteur de mouvement PIR Waytronic Powersound V1

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Waytronic Powersound V1 PIR Motion Sensor Voice Programmable Speaker. Please read this manual thoroughly before using the device to ensure proper function and safety.

Consignes de sécurité

• Assurez-vous que l'alimentation électrique corresponde aux exigences de l'appareil (DC12V).
• Cet appareil est pas étanche. Avoid exposure to rain, moisture, or any liquids.
• N’essayez pas de démonter ou de réparer l’appareil vous-même. Confiez toute intervention à un personnel qualifié.
• Gardez l'appareil à l'écart des températures extrêmes et de la lumière directe du soleil.
• Install the device securely to prevent it from falling.

Produit terminéview

The Waytronic Powersound V1 is a wall-mountable PIR motion sensor speaker designed to play custom audio files upon motion detection. It features a sensitive sensor, a built-in 10W loudspeaker, and supports audio file updates via USB or SD card.

Figure 1: Waytronic Powersound V1 PIR Motion Sensor Speaker with included power adapter.

Composants et caractéristiques :

• PIR Motion Sensor: Detects movement within approximately 16 feet (5 meters) and triggers audio playback.
• Haut-parleur intégré : 10W loudspeaker for clear audio output.
• Interface USB : For connecting a USB flash drive to transfer audio files.
• Emplacement pour carte SD : For inserting an SD card (max 2GB) to play audio directly or transfer files.
• Contrôles du volume : Buttons for adjusting playback volume.
• Modes de lecture : Supports single cycle or sequential playback of audio files.

Figure 2 : Côté view of the device showing the Infrared Indicator Light, SD card slot, USB interface, and control buttons (Previous/A, Next/B, Volume+/C, Volume-/L).

Installation

1. Montage de l'appareil

• The Powersound V1 is designed for wall mounting.
• Choose a location where the motion sensor has an unobstructed view of the desired detection area.
• Consider installing it on the top of a wall or discreetly behind an object like a tree in a covered outdoor area, ensuring it is protected from moisture.
• Secure the device using appropriate mounting hardware (not included).

2. Connexion électrique

• Connect the provided DC12V power adapter to the device's power input port.
• Branchez l'adaptateur secteur sur une prise électrique standard. L'appareil s'allumera automatiquement.

3. Customizing Audio Files

L'appareil prend en charge l'audio MP3 files. You can update audio files using either a USB flash drive or an SD card.

Figure 3: Close-up of the USB port and SD card slot for audio file gestion.

Using a USB Flash Drive:

1. Format your USB flash drive to FAT32. (Note: NTFS format may cause transfer issues).
2. Copy your desired MP3 audio files dans le répertoire racine de la clé USB.
3. Insert the USB flash drive into the USB interface on the device.
4. Appuyez et maintenez enfoncé le V+/C button. The device should automatically begin copying files to its internal memory. The red indicator light may blink during this process.
5. Once the transfer is complete, remove the USB flash drive.

Using an SD Card:

1. Copy your desired MP3 audio files to a standard SD card (maximum 2GB).
2. Insert the SD card into the SD card slot on the device.
3. The device can play audio filedirectement depuis la carte SD.

Mode d'emploi

1. Détection et lecture des mouvements

• Once powered on and with audio files loaded, the device will enter standby mode.
• When the PIR motion sensor detects movement within its range (approximately 16 feet), it will trigger the playback of the stored audio files.
• The audio can be heard up to 100 feet (30 meters) away.

Figure 4: Illustration of the motion sensor detecting movement and triggering sound playback.

2. Modes de lecture

The device supports two main playback modes:

• Single Cycle Playback: Plays one audio file and then stops until motion is detected again.
• Order Playback (Sequential): Lit le son files in sequence. After playing the last file, it will loop back to the first.

Specific instructions for switching between these modes are typically found in the device's internal programming or may be controlled by the order of files on the SD card/USB drive. Refer to the manufacturer's specific guidance if available.

3. Réglage du volume

• Utilisez le V+/C bouton pour augmenter le volume.
• Utilisez le V-/L bouton pour baisser le volume.
• The device offers multiple volume levels.

Entretien

• Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni de produits abrasifs.
• Stockage: En cas de non-utilisation prolongée, débranchez l'adaptateur secteur et rangez l'appareil dans un endroit frais et sec.
• Protection de l'environnement : As the device is not waterproof, ensure it is always protected from rain and high humidity, especially if used in outdoor settings.

Dépannage

Caractéristiques

Garantie et assistance

Informations sur la garantie

The Waytronic Powersound V1 comes with a Garantie complète. For specific terms and conditions, please refer to the warranty card included with your product or contact Waytronic customer service.

Assistance clientèle

If you encounter any issues or have questions not covered in this manual, please contact Waytronic customer service. You can often find contact information on the product packaging, the official Waytronic websur le site ou via votre plateforme d'achat.

When contacting support, please have your product model (Powersound V1) and purchase details ready.