1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Raymarine Quantum 2 Doppler Radar system. The Quantum 2 is an 18-inch, 24-mile solid-state pulse compression radar designed for marine vessels, featuring advanced Doppler collision avoidance technology.
Veuillez lire attentivement ce manuel avant d'installer ou d'utiliser l'appareil. Conservez ce manuel pour toute consultation ultérieure.
2. Consignes de sécurité
WARNING: Risk of serious injury or death.
- L'installation et l'entretien doivent être effectués par du personnel qualifié.
- Ensure the vessel's power is disconnected before installation or maintenance to prevent electrical shock.
- Do not operate the radar in close proximity to personnel. Maintain a safe distance from the radar scanner when it is transmitting. Refer to the installation guide for specific safe distances.
- Ce produit contient des substances chimiques reconnues par l'État de Californie comme pouvant causer le cancer et des anomalies congénitales ou d'autres problèmes de reproduction (avertissement Proposition 65).
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- Raymarine Quantum 2 Doppler Radar Scanner (18-inch)
- 15-meter Power and Data Cable
- Kit de matériel de montage
- Dossier de documentation (comprenant ce manuel)
4. Configuration et installation
Proper installation is crucial for optimal performance and safety. Consult a professional marine electronics installer if you are unsure about any steps.
4.1 Emplacement de montage
Select a mounting location that provides an unobstructed view of the horizon and is as high as possible on the vessel. Ensure the mounting surface is strong enough to support the radar unit's weight and withstand marine conditions.
Image: The Raymarine Quantum 2 Doppler Radar unit, typically mounted on a mast or arch, provides 360-degree coverage.
4.2 Connexion électrique et de données
The Quantum 2 radar connects to your vessel's electrical system and a compatible Raymarine multifunction display (MFD) using the supplied 15-meter power and data cable. The unit operates on 12 Volts DC.
- Pouvoir: Connect the power wires to a dedicated 12V DC circuit, ensuring proper fusing.
- Données: The radar supports both Wi-Fi and hardwired Ethernet connections to your Raymarine MFD. For optimal performance and reliability, a hardwired connection is recommended.
Refer to the detailed installation guide provided with your MFD for specific wiring diagrams and network configuration.
5. Mode d'emploi
The Quantum 2 radar is controlled via a compatible Raymarine multifunction display (MFD). Ensure your MFD software is up to date for full functionality.
5.1 Mise sous/hors tension
The radar unit powers on automatically when the vessel's main power is supplied to its circuit. To power off, disconnect the power supply to the radar circuit.
5.2 Basic Radar Operation
- Access Radar Application: On your MFD, select the Radar application from the home screen.
- Transmettre: Select the "Transmit" option to start the radar scanning.
- Ajustement de la plage : Use the MFD controls to adjust the radar range (up to 24 miles).
- Gain/Clutter: Adjust gain and sea/rain clutter settings for optimal target detection in varying conditions.
5.3 Doppler Collision Avoidance
The Quantum 2's Doppler technology highlights moving radar contacts in different colors to indicate whether they are moving towards or away from your vessel. This feature significantly enhances collision avoidance awareness.
- Red Targets: Indicate targets moving towards your vessel (collision threat).
- Green Targets: Indicate targets moving away from your vessel.
Activate the Doppler mode from the radar application menu on your MFD.
5.4 fonctionnalités avancées
- Safety Sector: Define a safety zone around your vessel to receive alerts for targets entering this area.
- MARPA (Mini Automatic Radar Plotting Aid): Manually acquire and track up to 10 radar targets to calculate their course, speed, closest point of approach (CPA), and time to CPA (TCPA).
- Target Trails: Display historical paths of moving targets to visualize their movement patterns.
Consult your MFD's user manual for detailed instructions on configuring and utilizing these advanced radar features.
6. Entretien
The Raymarine Quantum 2 radar is designed for minimal maintenance. Regular inspection and cleaning will ensure its longevity and performance.
- Nettoyage: Periodically clean the radar dome with fresh water and a soft cloth to remove salt spray, dirt, and bird droppings. Avoid abrasive cleaners or solvents.
- Inspection des câbles : Annually inspect the power and data cable for any signs of wear, corrosion, or damage. Ensure all connections are secure.
- Matériel de montage : Check mounting bolts and hardware for tightness and corrosion.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| No radar image on MFD |
|
|
| Poor target detection / Cluttered screen |
|
|
| Doppler colors not appearing |
|
|
For further assistance, contact Raymarine customer support or visit their official website.
8. Spécifications
| Numéro de modèle | RAY.T70417 |
| Marque | Raymarine |
| Description | Quantum 2 Doppler Radar with 15 meter power and data cables, 18", 24 mile solid state pulse compression radar. Features Doppler collision avoidance, safety sector, MARPA, and target trails. WiFi or hardwired data connection. |
| Source d'énergie | Direct Wired to Vehicle's Electrical System |
| Voltage | 12 volts (CC) |
| Appareils compatibles | Marine vessels (Raymarine MFDs) |
| Poids de l'article | 0.06 kilogrammes |
| GTIN / UPC | 723193823125 |
9. Garantie et assistance
Raymarine products are backed by a comprehensive warranty. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official Raymarine website.
For technical support, service, or to find an authorized Raymarine dealer, please visit www.raymarine.com/support or contact your regional Raymarine service center.