IPC HIPER CLEAN Professional Vacuum Cleaner for Solids and Liquids

1. Introduction

The IPC HIPER CLEAN Professional Vacuum Cleaner is designed for efficient cleaning of both solids and liquids. Featuring a robust 75-liter tank and two powerful motors, this unit offers significant capacity, making it an ideal solution for professional service providers and demanding cleaning tasks.

2. Configuration et assemblage

Follow these steps to correctly assemble your IPC HIPER CLEAN Professional Vacuum Cleaner:

1. Fixez les roues : Secure the rear wheels using a screwdriver and the provided screws. The front wheels simply snap into their designated slots. This ensures maximum mobility during use.
2. Select and Install Filter:
   • For liquid extraction, use the foam filter. Connect it to the motor head.
   • For dry vacuuming (solids), use the washable cloth filter. This filter helps protect the motor from dust.
3. Fixez la tête du moteur : Place the motor head onto the tank body. Ensure the lateral clamps are securely fastened to prevent accidental detachment during operation.
4. Raccordez le tuyau d'aspiration : Attach the main suction hose to the designated inlet on the tank body. Align the hose with the marking and twist to secure it.
5. Raccordez le tuyau d'arrosage : Connect the transparent water hose to the small nozzle on the tank. This hose supplies water/cleaning solution to the extraction nozzle.
6. Assembler les tubes d'extension et la buse : Attach the aluminum extension tubes to the end of the suction hose. Then, connect your desired extraction nozzle (large or small) to the extension tube. The water hose connects to a blue quick-connector on the extension tube. Press the blue connector and push the hose in to secure it. To remove, press the blue connector and pull the hose.

Figure 1 : Face avant view of the IPC HIPER CLEAN Professional Vacuum Cleaner with accessories.

Figure 2: Aluminum extension tubes for extended reach.

3. Mode d'emploi

The IPC HIPER CLEAN is designed for deep cleaning. Always ensure the correct filter is installed for your task (foam for liquids, cloth for solids).

3.1. Connexion électrique

Before use, connect the product to a power outlet. Important: Vérifiez que le voltage of your power outlet (127V or 220V) matches the product's requirements to prevent damage.

3.2. Remplissage du réservoir d'eau

The vacuum cleaner features an external 6-liter clean water reservoir. Fill this tank with water and your preferred cleaning solution. This large capacity allows for extended cleaning sessions without frequent refills.

3.3. Utilisation des commandes

On the motor head, you will find two buttons:

• Suction (Aspirar): Activates the vacuum suction.
• Spray (Borrifar): Activates the water/solution spray function.

You can use these functions independently or simultaneously. For extraction-only tasks (without spraying), it is recommended to turn off the spray function.

3.4. Cleaning Process (Extraction)

1. First, vacuum the surface to remove loose dirt and debris using the cloth filter.
2. Switch to the foam filter for liquid extraction. Spray the cleaning solution onto the surface using the trigger on the hose handle.
3. Allow the solution to act for a few minutes.
4. Gently scrub the surface with a brush (if needed, depending on the nozzle).
5. Activate the suction to extract the liquid and dirt. The transparent nozzle allows you to see the dirt being removed.

The vacuum can extract up to 80% of the liquid, with the remaining moisture evaporating within a few hours. For best results, perform liquid extraction on warm days and ensure the area is well-ventilated.

Figure 3: Demonstrating the vacuum cleaner in use for floor cleaning.

3.5. Utilisation de la buse

• Small Extraction Nozzle: Ideal for upholstery and smaller surfaces. It features soft bristles and a rubber squeegee to pull liquid into the nozzle, along with a spray nozzle for solution application.
• Large Extraction Nozzle: Perfect for cleaning floors, carpets, and rugs. It also includes soft bristles and a removable rubber squeegee for effective liquid extraction and a spray nozzle.
• Multi-purpose Nozzle: Designed for versatile cleaning, this nozzle rotates 360 degrees, allowing access to hard-to-reach corners and tight spaces.
• Suceur plat : For narrow gaps and edges.

Figure 4: The large brush head with bristles and squeegee for effective cleaning.

4. Entretien

4.1. Nettoyage du filtre

• Filtre en mousse : After liquid extraction, remove and rinse the foam filter thoroughly with water. Allow it to air dry completely before storing or reusing.
• Washable Cloth Filter: After dry vacuuming, remove the cloth filter. It can be washed to remove accumulated dust and debris. Ensure it is completely dry before reattaching.

4.2. Vidange du réservoir

Regularly empty the dirty water tank. The product features a float system that prevents water from reaching the motor when the tank is full, protecting the appliance.

4.3. Rangement des accessoires

Utilize the accessory holder to keep all nozzles and tubes organized and easily accessible. This holder attaches to the product by lifting the clean water reservoir, inserting the holder, and then lowering the reservoir back into place.

Figure 5: The spray function of the nozzle in action.

5. Dépannage

If you encounter any issues with your IPC HIPER CLEAN Professional Vacuum Cleaner, please check the following:

• Pas d'alimentation : Ensure the power cord is securely plugged into a working outlet and that the voltage matches the product's requirements. Check the power switch on the motor head.
• Aspiration réduite : Check if the filters are clean and correctly installed. Ensure the hose and nozzles are free from blockages. Verify that the tank is not full (for liquids).
• Sans spray : Check if the clean water tank is filled and the water hose is properly connected. Ensure the spray button is activated and the trigger on the handle is pressed.
• Fuite d'eau : Ensure all hose connections are tight and secure. Check the seals on the motor head and tank.

For persistent problems, please refer to the full user manual or contact customer support.

6. Spécifications

7. Garantie et assistance

7.1. Informations sur la garantie

This IPC HIPER CLEAN Professional Vacuum Cleaner comes with a Garantie de 1 ans À compter de la date d'achat, veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie. La garantie couvre les défauts de fabrication dans des conditions normales d'utilisation.

7.2. Assistance clientèle

For technical assistance, spare parts, or any questions not covered in this manual, please contact IPC customer support. Refer to the contact information provided with your product packaging or visit the official IPC website.