Fisher REM-C30 Audio Remote Control User Manual

1. Introduction

This manual provides instructions for the Fisher REM-C30 Audio Remote Control (Part Number: 6450326516). This remote is designed to operate various Fisher and Sanyo audio systems, offering convenient control over your audio and video components.

The REM-C30 is an original equipment manufacturer (OEM) remote control, ensuring full compatibility and functionality with the specified models. It is an ergonomic, button-controlled device utilizing infrared connectivity.

Modèles compatibles :

• Fisher DCS-C60, TAD-C40, TAD-C60
• Fisher DCS-M300, TAD-M300 (replaces 6450176081 REM-M300)
• Fisher DCS-M205, DCS-M210, TAD-M205, TAD-M210 (supports 6450230523 REM-M210)
• Fisher DCS-M230, DCS-M240, TAD-M230, TAD-M240 (supports 6450277177 REM-M240)
• Sanyo AWM-2200, AWM-2200U, AWM-2300, AWM-2300U, DC-C10, DC-C10U (supports 6450326509 RB-C10)
• Sanyo AWM-1800, AWM-1800U (supports 6450338137 RB-C5)
• Sanyo CWM-460, CWM-470, CWM-480 (supports 6450478703 RB-S925)

Figure 1 : Face avant view of the Fisher REM-C30 Audio Remote Control.

2. Installation

2.1 Installation de la batterie

The Fisher REM-C30 remote control requires two (2) AA alkaline batteries for operation. Follow these steps to install or replace the batteries:

1. Localisez le couvercle du compartiment à piles à l'arrière de la télécommande.
2. Faites glisser le couvercle vers le bas ou appuyez sur le loquet (s'il y en a un) pour ouvrir le compartiment.
3. Insert two new AA alkaline batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Remettez le couvercle du compartiment à piles en place jusqu'à ce qu'il s'enclenche correctement.

Note: Always replace both batteries at the same time. Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote will not be used for an extended period to prevent leakage.

Figure 2: Fisher REM-C30 remote control alongside its original packaging, showing the overall product.

3. Mode d'emploi

The Fisher REM-C30 remote control provides comprehensive functionality for compatible audio and video systems. Point the remote directly at the infrared sensor of your device for optimal performance.

3.1 Fonctions des boutonsview

Figure 3 : Détaillé view of the Fisher REM-C30 remote control buttons.

• U/ON (Power): Turns the connected audio/video component on or off.
• Touches numériques (0-9): Utilisé pour la sélection directe des pistes, l'entrée des canaux ou les réglages numériques.
• ACCORDEUR/BANDE : Switches between tuner bands (e.g., AM/FM) or tuner modes.
• PRÉRÉGLAGE: Cycles through preset radio stations or other stored settings.
• DORMIR: Activates the sleep timer function on compatible devices.
• MINUTEUR: Accesses timer settings.
• CLOCK SET/CLEAR: Sets or clears the clock on compatible devices.
• AJUSTER: Used for fine-tuning settings.
• DISC SELECT: Selects the disc tray on multi-disc players.
• Playback Controls (Play/Pause, Stop, Fast Forward, Rewind, Skip Forward, Skip Back): Standard controls for audio/video playback.
• RÉPÉTER: Toggles repeat playback mode.
• ALÉATOIRE: Toggles random/shuffle playback mode.
• MÉMOIRE: Stores or recalls settings.
• TAPE-A/B: Selects Tape Deck A or B.
• REC MUTE: Mutes recording function.
• Record (Red Circle): Initiates recording on compatible devices.
• SOUND PRESET: Cycles through predefined sound equalization settings.
• VIDEO/DVD: Selects video or DVD input source.
• MUET: Coupe ou réactive la sortie audio.
• VOLUME (+/-): Augmente ou diminue le volume audio.

Specific functions may vary depending on the connected audio/video component. Refer to your component's user manual for detailed information on its remote control compatibility and features.

4. Entretien

4.1 Nettoyage de la télécommande

Pour préserver l'apparence et le bon fonctionnement de votre télécommande, suivez ces conseils de nettoyage :

• Essuyez la surface de la télécommande avec un chiffon doux et sec.
• Pour la saleté tenace, légèrement dampNettoyez le chiffon avec de l'eau ou un nettoyant doux non abrasif. Veillez à ce qu'aucun liquide ne pénètre à l'intérieur de la télécommande.
• N’utilisez pas de produits chimiques agressifs, de nettoyants abrasifs ou de solvants, car ceux-ci peuvent endommager la finition ou les composants internes de la télécommande.

4.2 Entretien de la batterie

Refer to Section 2.1 for battery installation and replacement instructions. Always use fresh AA alkaline batteries. If the remote control will not be used for an extended period (e.g., one month or more), remove the batteries to prevent potential leakage and damage to the remote.

5. Dépannage

If you experience issues with your Fisher REM-C30 remote control, try the following troubleshooting steps:

If the problem persists after trying these solutions, contact customer support or consult the user manual for your specific audio/video component.

6. Spécifications

7. Informations sur la garantie

Specific warranty details for this product are typically provided by the seller or manufacturer at the time of purchase. Please refer to your purchase documentation or contact the retailer for information regarding warranty coverage, terms, and conditions.

Generally, remote controls are covered against manufacturing defects for a limited period. Damage resulting from misuse, accidental drops, liquid exposure, or unauthorized repairs is typically not covered under warranty.

8. Assistance clientèle

For technical assistance, troubleshooting beyond the scope of this manual, or inquiries regarding your Fisher REM-C30 remote control, please contact the retailer from whom you purchased the product. You may also refer to the support resources provided by Fisher Parts or the manufacturer of your compatible audio/video system.

When contacting support, please have your product model (REM-C30) and part number (6450326516) readily available.