1. Produit terminéview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Caractéristiques principales :
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Réservoir d'eau intégré : Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Capacité de coupe : Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Agent de sécurité: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Consignes de sécurité
Lisez et comprenez toujours tous les avertissements de sécurité, les instructions, les illustrations et les spécifications fournis avec cet outil électrique. Le non-respect des instructions ci-dessous peut entraîner un choc électrique, un incendie et/ou des blessures graves.
Avertissements généraux de sécurité :
- Portez l'équipement de protection individuelle (EPI) approprié, notamment des lunettes de sécurité, une protection auditive et des gants.
- Assurez-vous que la zone de travail est propre, bien éclairée et exempte d’obstructions.
- Tenez les enfants et les passants éloignés pendant l'utilisation de l'outil.
- Never operate the tool if the power cord or plug is damaged.
- Débranchez toujours l'alimentation électrique avant d'effectuer des réglages, de changer des accessoires ou de procéder à des opérations de maintenance.
- Utilisez la lame adaptée au matériau à couper.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Composants terminésview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Unité moteur
- Réservoir d'eau
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Garde de lame
- Interrupteur marche/arrêt
- Poignée de transport
Figure 1 : Plusview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Installation
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Déballage et inspection
- Retirez soigneusement tous les composants de l'emballage.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Vérifiez que tous les composants énumérés sont présents.
4.2 Remplissage du réservoir d'eau
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Mode d'emploi
Follow these steps for safe and effective tile cutting.
5.1 Mise sous/hors tension
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Effectuer une coupe
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Official Product Video: How to Use
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Entretien
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Nettoyage du réservoir d'eau
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Débrancher l'alimentation électrique.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Remontez les composants.
Remplacement de la lame 6.2
Replace the diamond cutting disc when it becomes dull or damaged.
- Assurez-vous que l'outil est débranché.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Serrez fermement l'écrou de fixation.
7. Dépannage
This section addresses common issues you might encounter with your tile cutter.
| Problème | Cause possible | Solution |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| La machine ne démarre pas | Pas d'alimentation électrique ; interrupteur défectueux ; problème de moteur. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | Einhell |
| Numéro de modèle | 4301185 |
| Pouvoir | 800 watts |
| Voltage | 240 volts |
| Vitesse | 2950 tr/min |
| Diamond Cutting Disc Diameter | 180 mm |
| Hauteur de coupe maximale (90°) | 34 mm |
| Hauteur de coupe maximale (45°) | 14 mm |
| Angle of Cut | 45 degrés |
| Dimensions de la table (L x l) | 39.6 cm x 38.5 cm |
| Dimensions du produit (L x l x H) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Poids du produit | 9.1 kilogrammes |
| Source d'énergie | Électrique avec cordon |
| Caractéristiques spéciales | Adjustable angle stop, parallel stop with scale |
9. Garantie et assistance
9.1 Informations sur la garantie
This Einhell product comes with a Garantie limitée de 2 ansVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
9.2 Assistance clientèle
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webPour obtenir les informations de contact les plus récentes, veuillez consulter le site web ou l'emballage de votre produit.
