1. Introduction
Thank you for choosing the Pic Solution Veo Premium Digital Thermometer. This device is designed for accurate and rapid measurement of human body temperature. Its flexible probe and clear, color-coded display make it easy and comfortable to use for all ages. Please read this manual carefully before use and keep it for future reference.
2. Consignes de sécurité
- This thermometer is intended for measuring human body temperature only. Do not use it for other purposes.
- N'essayez pas de démonter ou de réparer l'appareil.
- Gardez le thermomètre hors de portée des enfants et des animaux domestiques.
- Évitez d'exposer le thermomètre à la lumière directe du soleil, aux températures élevées ou à une humidité extrême.
- Clean the thermometer before and after each use as described in the 'Maintenance and Cleaning' section.
- Ne mordez pas la sonde.
- If the device malfunctions or displays an error, refer to the 'Troubleshooting' section or contact customer support.
3. Produit terminéview
The Pic Solution Veo Premium Digital Thermometer features a user-friendly design with a flexible probe for comfort and a large, easy-to-read display.
Image 3.1: Devant view of the Pic Solution Veo Premium Digital Thermometer, showing the display, power button, and flexible probe.
Image 3.2: Illustration highlighting the flexible probe of the thermometer, designed for comfortable use.
Composants:
- Sonde flexible : The part that comes into contact with the body for temperature measurement.
- Écran d'affichage : Shows temperature readings and indicators. Features color-coded backlighting (green for normal, red for fever).
- Bouton d'alimentation : Used to turn the thermometer on and off.
- Compartiment à piles : Located at the end opposite the probe, houses the battery.
4. Installation
4.1. Installation de la batterie
The thermometer comes with a battery pre-installed. If the battery needs replacement, follow these steps:
- Gently slide open the battery compartment cover located at the end of the thermometer.
- Remove the old battery (type CR1632 3V).
- Insert a new CR1632 3V lithium-ion battery with the positive (+) side facing up.
- Fermez soigneusement le couvercle du compartiment à piles.
4.2. Nettoyage initial
Before first use, and after each subsequent use, clean the thermometer as described in the 'Maintenance and Cleaning' section.
5. Mode d'emploi
5.1. Allumer/éteindre
- Pour allumer: Press the power button. The display will briefly show all segments, then the last measured temperature, and finally 'Lo' with a flashing '°C' or '°F' indicating it's ready for measurement.
- Éteindre: Press and hold the power button until the display turns off, or the device will automatically shut off after approximately 10 minutes of inactivity to conserve battery life.
5.2. Prise de mesure de la température
- Assurez-vous que le thermomètre est propre et désinfecté.
- Appuyez sur le bouton d'alimentation pour allumer le thermomètre.
- Place the flexible probe in the desired measurement location:
- Utilisation orale: Place the probe tip under the tongue, as close as possible to the heat pocket. Keep the mouth closed.
- Utilisation axillaire (aisselle) : Place the probe tip in the center of the armpit. Ensure the arm is pressed firmly against the body to hold the probe in place.
- Hold the thermometer steady until a series of beeps indicates the measurement is complete. The display will show the peak temperature.
- Lire la température affichée à l'écran.
- Turn off the thermometer and clean it after use.
5.3. Comprendre l'affichage
The Veo Premium Digital Thermometer features a color-coded display for quick interpretation of temperature readings:
Image 5.1: Display showing a normal temperature (e.g., 36.5°C) with a green backlight, indicating no fever.
- Rétroéclairage vert : Indicates a normal body temperature (typically below 37.5°C / 99.5°F).
Image 5.2: Display showing an elevated temperature (e.g., 38.0°C) with a red backlight, indicating a fever.
- Rétroéclairage rouge : Indicates an elevated body temperature or fever (typically 37.5°C / 99.5°F or higher). The thermometer will also emit a distinct alarm sound when a fever is detected.
5.4. Fonction de mémoire
The thermometer automatically stores the last temperature measurement. To recall the last reading, press the power button briefly when the device is off. The last reading will be displayed for a few seconds before the thermometer enters measurement mode.
6. Entretien et nettoyage
Proper maintenance and cleaning ensure the accuracy and longevity of your thermometer.
- Nettoyage: After each use, wipe the probe with a soft cloth moistened with 70% isopropyl alcohol or cold soapy water. Do not immerse the entire thermometer in water.
- Désinfection: For thorough disinfection, wipe the probe with an alcohol swab.
- Stockage: Store the thermometer in its transparent case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Remplacement de la batterie : Replace the battery when the low battery indicator appears on the display. Refer to section 4.1 for instructions.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Display shows 'Lo' but does not measure. | Temperature is below the measurable range (e.g., room temperature). | This is normal. Place the probe on the body to begin measurement. |
| L'écran affiche « Err ». | Erreur de mesure ou dysfonctionnement de l'appareil. | Éteignez puis rallumez le thermomètre. Si l'erreur persiste, contactez le service client. |
| Low battery indicator appears. | La batterie est faible. | Replace the battery as described in section 4.1. |
| Le thermomètre ne s'allume pas. | Dead battery or incorrect battery insertion. | Check battery insertion or replace the battery. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 02023006000000 |
| Dimensions du produit | 1.97 x 0.91 x 7.09 pouces; 1.06 onces |
| Piles | 1 Lithium Ion battery (CR1632 3V) required (included) |
| Caractéristiques spéciales | Alarm, Waterproof, Flexible Probe, Color-coded Display |
| Type d'affichage | Numérique |
| Instructions d'entretien du produit | Essuyer propre |
| Source d'énergie | Alimenté par batterie |
| Matériau extérieur | Plastique |
| Composants inclus | Digital thermometer, transparent case, instructions for use |
9. Garantie et assistance
For warranty information or technical support, please contact the manufacturer:
Fabricant: PROMEDICA S.p.A.
Adresse: Via Artigiani, 10, 24060 Telgate (BG), Italy
Website: www.picsolution.com
Veuillez avoir votre numéro de modèle (02023006000000) et les détails de votre achat à portée de main lorsque vous contactez l'assistance.
10. Élimination
This product contains a battery and electronic components. Do not dispose of the device or its battery with general household waste. Please follow local regulations for the disposal of electronic waste and batteries to protect the environment.
Image 10.1: Back of the product packaging, displaying environmental disposal symbols and manufacturer details. The barcode 8058090004349 is visible.