SHARP ES-S7C-WL

SHARP Compact Drum Washing Machine ES-S7C-WL Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and effective use of your new SHARP ES-S7C-WL Compact Drum Washing Machine. Please read this manual thoroughly before operating the appliance and retain it for future reference. This model features a compact design, heater sensor drying, four eco-sensors for optimized performance, quiet DD inverter operation, and Plasmacluster technology for enhanced hygiene.

SHARP ES-S7C-WL Compact Drum Washing Machine front view

Figure 1 : Face avant view of the SHARP ES-S7C-WL Compact Drum Washing Machine.

2. Consignes de sécurité

Respectez toujours les consignes de sécurité de base lors de l'utilisation d'appareils électriques afin de réduire les risques d'incendie, d'électrocution ou de blessures.

  • Assurez-vous que l'appareil est correctement mis à la terre.
  • N’utilisez pas la machine à laver si elle est endommagée ou si elle fonctionne mal.
  • Keep children away from the appliance during operation. This model includes a child lock feature.
  • Ne pas laver ni sécher les articles souillés par des substances inflammables.
  • Débranchez l'appareil de la prise de courant avant de le nettoyer ou d'effectuer toute opération d'entretien.

3. Configuration et installation

Proper installation is crucial for the performance and longevity of your washing machine. Refer to the following guidelines and diagrams.

3.1 Carry-in Confirmation Items

Before carrying the unit into your home, confirm that all entry points and passages are wide enough. A minimum clearance of 10cm more than the product's dimensions is required for smooth transport.

Installation diagram showing required clearances for carry-in

Figure 2: Carry-in clearance requirements for product dimensions, entrance, corridor, elevator, and staircase.

3.2 Installation Confirmation Items

Assurez-vous que la zone d'installation réponde aux critères suivants :

  • Espace requis : Allow at least 15cm above the unit, 1cm behind, and 1cm on each side for proper ventilation and operation.
  • Hauteur du robinet : The faucet should be 10-20cm higher than the top of the washing machine.
  • Door Opening Space: Ensure 20-40cm of clear space in front of the machine for the door to open fully.
  • Poêle étanche : Check for the presence of a waterproof pan and its inner dimensions. The installable waterproof pan requires an inner width of 590mm or more and an inner depth of 540mm or more.
  • Additional costs may apply depending on the presence of a drain elbow, foot stand, and the drain port location.
Installation diagram showing required clearances for washing machine placement

Figure 3: Installation space requirements including clearances and waterproof pan dimensions.

3.3 Conception compacte

The ES-S7C-WL is designed to fit into standard spaces. Its body measures 59.6cm in width and 60.0cm in depth (excluding hoses), allowing it to be placed neatly within a typical waterproof pan (approx. 64cm x 64cm outer dimensions). The door height is 47.2cm, making it easy to load and unload laundry. Ample space is provided even when the door is fully open.

Diagram illustrating compact drum dimensions and door height

Figure 4: Compact drum dimensions and door height for easy access.

4. Mode d'emploi

This section details the basic operation of your washing machine.

4.1 Panneau de configuration terminéview

Familiarize yourself with the control panel for selecting wash cycles and options.

Control panel and detailed dimension diagram

Figure 5: Control panel layout and detailed product dimensions.

4.2 Smart Energy Saving with 4 Sensors

The washing machine is equipped with four eco-sensors to optimize washing and drying performance while saving energy.

  • Capteur de température : Detects ambient temperature and drying conditions.
  • Capteur de niveau d'eau : Adjusts water usage based on the type of clothes.
  • Weight Sensor: Determines the amount of clothes to optimize wash cycles.
  • Capteur de vibrations : Detects clothes imbalance during spin cycles.
Diagram illustrating the four eco-sensors: Temperature, Water Level, Weight, and Vibration

Figure 6: The four eco-sensors for smart energy saving.

4.3 Technologie Plasmacluster

The integrated Plasmacluster technology helps maintain cleanliness and freshness.

  • Cours de nettoyage de baignoire : A one-button operation to clean the washing tub using Plasmacluster ions.
  • Deodorizing Course: For clothes that cannot be washed with water, this course uses Plasmacluster ions to remove odors.
Diagram showing Plasmacluster features: Tub Clean Course and Deodorizing Course

Figure 7: Plasmacluster features for tub cleaning and deodorizing.

5. Entretien

Un entretien régulier assure des performances optimales et prolonge la durée de vie de votre machine à laver.

  • Nettoyage de la baignoire : Utilize the Plasmacluster Tub Clean Course regularly to prevent mold and odors in the washing tub.
  • Nettoyage du filtre : Clean the lint filter after every use to maintain drying efficiency.
  • Nettoyage extérieur : Essuyez l'extérieur avec un chiffon doux et sec.amp chiffon. N'utilisez pas de nettoyants abrasifs.
  • Joint de porte: Periodically wipe the door gasket to remove any residue or moisture.

6. Dépannage

If you encounter issues with your washing machine, refer to the following common troubleshooting steps. For more complex problems, contact customer support.

ProblèmeCause possibleSolution
La machine ne démarre pasPower cord unplugged, door not closed properly, child lock engaged.Vérifiez le branchement électrique, assurez-vous que la porte est bien verrouillée, désactivez la sécurité enfant.
Vibrations/bruit excessifsUneven load, machine not level, shipping bolts not removed.Redistribute laundry, adjust leveling feet, ensure shipping bolts are removed.
L'eau ne s'écoule pasDrain hose kinked or clogged, drain filter clogged.Vérifiez et dégagez le tuyau d'évacuation, nettoyez le filtre d'évacuation.
Les vêtements ne sèchent pas correctementLint filter clogged, overloaded, incorrect drying cycle selected.Clean lint filter, reduce load size, select appropriate drying cycle.

7. Spécifications

Detailed technical specifications for the SHARP ES-S7C-WL.

FonctionnalitéSpécification
Numéro de modèleES-S7C-WL
Capacité (lavage/essorage)7 kg
Capacité (sec)3.5 kg
Dimensions hors tout (L x P x H)640 mm x 600 mm x 1039 mm (including drain hose)
Poids du produit76 kg
Consommation électrique (lavage)60 Wh (50/60Hz)
Power Consumption (Wash to Dry)1600 Wh (50/60Hz)
Approximate Time (Wash)44 minutes (50/60Hz)
Approximate Time (Wash to Dry)170 minutes (50/60Hz)
Bruit de fonctionnement (lavage)24 dB
Bruit de fonctionnement (rotation)39 dB
Bruit de fonctionnement (à sec)36 dB
Water Usage (Wash to Spin 7kg)57 L
Water Usage (Wash to Dry 3.5kg)80 L
Voltage100 V (CA)
Position d'ouvertureDevant
Matériau du tambourAcier inoxydable
CaractéristiquesInverter, Child Lock, Heater

8. Garantie et assistance

For warranty information, please refer to the warranty card included with your product or visit the official SHARP website. If you require technical assistance or have questions not covered in this manual, please contact SHARP customer support.

SHARP Customer Support: Please refer to your regional SHARP website pour les coordonnées.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.