Introduction
This manual provides instructions for the installation, operation, and maintenance of your uxcell Casement Window Locking Handle Set. This set includes two handles designed for use on casement windows, facilitating secure locking, opening, and closing. The handles are constructed from durable aluminum alloy and feature a black finish. This set is designed for installation on both left and right sides of your window.
Produit terminéview
The uxcell Casement Window Locking Handle Set consists of two aluminum alloy handles, each designed for screw-fixed installation. These handles provide a secure grip and locking mechanism for casement windows.
Figure 1 : Face avant view of the two casement window locking handles.
Figure 2: Alternate front view of the two casement window locking handles.
Instructions d'installation
Composants inclus
- 2 x Casement Locking Handles (Left and Right Hand Design)
Note: Mounting screws and off-set bases are not included with this product and must be acquired separately.
Outils requis (non inclus)
- Screwdriver (compatible with your chosen mounting screws)
- Percer (si de nouveaux trous de fixation sont nécessaires)
- Ruban à mesurer ou règle
- Crayon ou marqueur
Étapes d'installation
- Préparer la fenêtre : Ensure the window frame surface where the handle will be mounted is clean and free of obstructions.
- Positionnez la poignée : Place the handle in the desired position on the window frame. Ensure it aligns correctly for both opening and locking functions.
- Marquer les trous de montage : Using a pencil or marker, carefully mark the locations for the mounting screws through the holes on the handle's base. The mounting hole diameter is 5mm (0.2"). The mounting hole distances are 10mm (0.4") and 38mm (1.5").
- Percer des avant-trous (si nécessaire) : If installing on a new surface or if pilot holes are not present, carefully drill pilot holes at the marked locations. Ensure the drill bit size is appropriate for your chosen mounting screws to prevent stripping or cracking.
- Fixez la poignée : Align the handle with the pilot holes and secure it firmly using appropriate screws (not included). Do not overtighten.
- Attach Cover Caps: Once the handle is securely mounted, snap the provided cover caps over the screw heads for a finished appearance.
Figure 3 : Dessous view of a handle, illustrating screw mounting points.
Figure 4: Included screw cover caps.
Opération
To operate the casement window handle:
- Pour déverrouiller et ouvrir : Rotate the handle to disengage the locking mechanism. Once unlocked, pull or push the handle to open the window to the desired position.
- Pour fermer et verrouiller : Push or pull the window closed. Rotate the handle to engage the locking mechanism, ensuring the window is securely fastened.
Entretien
Proper maintenance ensures the longevity and optimal performance of your window handles.
- Nettoyage: Nettoyez régulièrement les poignées avec un chiffon doux et sec.amp Utilisez un chiffon. Évitez d'utiliser des nettoyants abrasifs, des solvants ou des produits chimiques agressifs, car ils peuvent endommager la finition.
- Inspection: Regularly inspect the handles and mounting screws for any signs of loosening or wear. Tighten screws as needed.
- Considérations environnementales : While made of aluminum alloy, prolonged exposure to harsh coastal environments with high salt content may accelerate corrosion. Regular cleaning and inspection are especially recommended in such conditions.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La poignée semble lâche ou instable. | Les vis de montage sont desserrées. | Serrez fermement les vis de fixation. Ne serrez pas trop fort. |
| Difficulty turning or engaging the lock. | Obstruction in the locking mechanism or window frame. | Check for any debris or obstructions preventing smooth operation. Ensure the window is properly aligned when closing. |
| Visible corrosion or discoloration. | Exposure to harsh environmental conditions (e.g., salt air). | Clean regularly with a mild detergent and soft cloth. Consider applying a protective coating suitable for aluminum in corrosive environments. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Nom du produit | Casement Locking Handle Set |
| Numéro de modèle | a17030100ux0187 |
| Couleur principale | Noir |
| Matériel | Alliage d'aluminium |
| Poids | 149g (for the set) / 0.09 Kilograms |
| Overall Dimension (L*W*H) | 140 x 40 x 42 mm (5.5 po x 1.6 po x 1.7 po) |
| Longueur du manche | 110 mm (4.3") |
| Diamètre du trou de montage | 5 mm (0.2") |
| Distance du trou de montage | 10mm (0.4"), 38mm (1.5") |
| Rectangle Base Size (L*Max.W*T) | 73 x 20 x 6 mm (2.9 po x 0.8 po x 0.24 po) |
| Conception | Left and Right Hand (Ambidextrous) |
| Mécanisme de fixation de la poignée | Screw Fixed |
| Finition extérieure | Aluminium enduit de poudre |
Informations sur la garantie
Specific warranty details for the uxcell Casement Window Locking Handle Set are not provided in the product information. For warranty inquiries, please contact uxcell directly or refer to the purchase documentation.
Assistance clientèle
If you have any questions, require assistance with installation, or need further support regarding your uxcell Casement Window Locking Handle Set, please contact uxcell customer service. You can often find contact information on the product packaging or through the uxcell brand store online.