SAMCOM FPCN10A

Manuel d'utilisation de la radio bidirectionnelle SAMCOM FPCN10A

Model: FPCN10A

1. Produit terminéview

The SAMCOM FPCN10A is a professional-grade UHF two-way radio designed for reliable long-range communication. It features a durable build, a high-capacity battery, and multiple channels with privacy codes for clear and secure conversations.

Contenu du colis

The SAMCOM FPCN10A radio kit includes the following items:

  • SAMCOM FPCN10A Radios (2 units)
  • Earpieces (2 units)
  • Charger Bases with AC adapters (2 units)
  • Clips de ceinture (2 unités)
  • Piles (2 unités)
  • Antennes (2 unités)
  • Manuel d'utilisation
Image showing the contents of the SAMCOM FPCN10A two-way radio package, including two radios, two earpieces, two charger bases, two belt clips, two batteries, and two antennas.
Figure 1 : Contents of the SAMCOM FPCN10A Two-Way Radio Package. This image displays all components included with the purchase, such as the radios, charging equipment, and accessories.

2. Installation

2.1 Installation et charge de la batterie

The SAMCOM FPCN10A radios are powered by a 3000mAh Lithium Polymer battery. Ensure the battery is fully charged before first use.

  1. Pour installer la batterie, alignez le bloc-batterie avec l'arrière de la radio et faites-le glisser vers le haut jusqu'à ce qu'il s'enclenche.
  2. To remove the battery, press the two small tabs on the sides of the radio (near the top of the battery compartment) and slide the battery downwards.
  3. Place the radio (with battery installed) into the charger base. The charger base connects to a standard AC wall outlet.
  4. The charging indicator light on the charger base will show the charging status. A full charge typically takes 4-5 hours.
Image showing a SAMCOM FPCN10A radio with its removable 3000mAh battery and a charging cradle.
Figure 2 : Battery and Charging Cradle. The image illustrates the removable 3000mAh battery and the dedicated charging cradle for the FPCN10A radio.
Image showing the back of the SAMCOM FPCN10A radio with the battery removed, revealing the battery compartment and FCC ID label.
Figure 3 : Arrière View of Radio with Battery Removed. This image highlights the battery attachment mechanism and the FCC ID label on the radio's back.

2.2 Fixation de l'antenne

The radio comes with a detachable SMA female connector antenna. Carefully screw the antenna onto the connector at the top of the radio until it is finger-tight. Do not overtighten.

2.3 Fixation du clip de ceinture

The belt clip can be attached to the back of the radio for convenient carrying. Align the belt clip with the designated slots on the battery pack and secure it with the provided screws.

Image showing a SAMCOM FPCN10A radio with an attached belt clip, worn by a person climbing.
Figure 4 : Radio with Belt Clip. The image demonstrates the radio with its belt clip attached, showing how it can be conveniently carried.

3. Mode d'emploi

3.1 Marche/Arrêt et contrôle du volume

  1. To power on the radio, rotate the top-left knob clockwise. You will hear a power-on tone and the display will illuminate.
  2. Continue rotating the same knob to adjust the volume. Clockwise increases volume, counter-clockwise decreases it.
  3. Pour éteindre l'appareil, tournez le bouton dans le sens inverse des aiguilles d'une montre jusqu'à ce qu'il s'enclenche.
Vidéo 1: SAMCOM FPCN10A Walkie Talkie Power On. This video demonstrates the process of turning on the radio and adjusting its volume.

3.2 Sélection du canal

The SAMCOM FPCN10A features 20 channels. To select a channel:

  1. Rotate the top-right knob to cycle through the available channels. The selected channel number will be displayed on the LCD screen.
  2. The radio supports CTCSS/DCS codes to minimize interference and ensure private conversations within your group. These are typically pre-programmed.

3.3 Transmission et réception

  1. Pour transmettre, maintenez enfoncé le bouton Push-to-Talk (PTT) situé sur le côté de la radio. Parlez clairement dans le microphone.
  2. Relâchez le bouton PTT pour arrêter la transmission et revenir en mode réception.
  3. The radio also supports Voice-Activated Transmission (VOX) for hands-free operation. This feature can be enabled or disabled through programming.

3.4 Fonction d'appel de groupe

The FPCN10A radios support a group call function, allowing you to communicate with multiple team members simultaneously across different channels. This feature enhances coordination for various operations.

Image depicting a security guard using a SAMCOM FPCN10A radio for 'One to Many Communication' in a stadium setting.
Figure 5 : One-to-Many Communication. This image illustrates the radio's capability for group communication, ideal for coordinating teams in large venues.

3.5 Scanning Feature

The radio includes a scanning feature that allows it to automatically scan through programmed channels to detect active transmissions. This can be useful for monitoring multiple channels without manual switching.

3.6 Portée de communication

The actual communication range of the FPCN10A radios varies depending on terrain and environmental conditions. Typical ranges are:

  • 1-2 miles in cities or towns
  • 2-15 miles in open areas, suburbs, or seasides
Image illustrating the long-range communication capabilities of the SAMCOM FPCN10A radio across different terrains like cities, open areas, and seasides.
Figure 6 : Long Range Communication. This diagram visually represents the varying communication distances achievable with the radio based on the surrounding environment.

4. Entretien

4.1 Entretien de la batterie

The 3000mAh battery provides over 24 hours of talk time and up to 250 hours of standby time. To maximize battery life:

  • Chargez complètement la batterie avant la première utilisation.
  • Évitez de surcharger ou de vider complètement la batterie.
  • Rangez la radio et la batterie dans un endroit frais et sec lorsqu'elles ne sont pas utilisées.
Image illustrating the 'ULTRA LONG WORKING TIME' of the SAMCOM FPCN10A radio, detailing standby time, continuous working time, typical working time, and charging time.
Figure 7 : Ultra Long Working Time. This graphic provides an overview of the radio's battery performance, including standby and operational durations.
Vidéo 2: SAMCOM FPCN10A Walkie Talkie Battery Life Test. This video demonstrates the battery life and low battery alert feature of the radio.

4.2 Nettoyage et durabilité

The FPCN10A radios are designed to be rugged and durable, with resistance to dust, shock, and vibration, and a 2-meter drop rating. They are also water-resistant.

  • Nettoyez l'extérieur de la radio avec un chiffon doux et sec.amp tissu. N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.
  • Ensure the battery contacts are clean and dry.
  • While water-resistant, avoid submerging the radio or exposing it to high-pressure water jets.

5. Dépannage

5.1 Pas d'alimentation

  • Vérifiez si la batterie est correctement installée et complètement chargée.
  • Ensure the power/volume knob is rotated clockwise to the 'ON' position.

5.2 Impossible de transmettre ou de recevoir

  • Vérifiez que la radio est réglée sur la bonne fréquence.
  • Assurez-vous que l'antenne est bien fixée.
  • Check that the battery has sufficient charge.
  • Confirm that you are within the effective communication range.
  • If using CTCSS/DCS codes, ensure they match the receiving radio.

5.3 Mauvaise qualité audio

  • Réglez le bouton de volume.
  • Veillez à ce que le microphone et le haut-parleur ne soient pas obstrués.
  • Move to an area with less interference or closer to the other radio.

5.4 Programming Issues

The SAMCOM FPCN10A radios are programmable. If you encounter issues with channel settings or advanced features, specialized programming software and a programming cable are required. Refer to the SAMCOM support website for programming guides and software downloads.

6. Spécifications

FonctionnalitéDétail
Numéro de modèleFPCN10A-2025
Gamme de fréquencesFréquence ultra-haute 406.1 MHz-470 MHz
Nombre de canaux20
Type de batterieLithium Polymère
Capacité de la batterie3000mAh
Puissance de sortie RFJusqu'à 2 W
Voltage7.4 volts
Poids de l'article1.98 livres
Dimensions du produit1.81"P x 5.63"L x 1.81"H
Type d'affichageÉcran LCD
Niveau de résistance à l'eauRésistant à l'eau
Identifiant FCC2AIOQ-FPCN10A

7. Garantie et assistance

7.1 Informations sur la garantie

The SAMCOM FPCN10A radios come with a 3-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

7.2 Assistance clientèle

For technical assistance, troubleshooting, or warranty inquiries, please visit the official SAMCOM webConsultez leur site web ou contactez leur service client. Les coordonnées se trouvent généralement sur l'emballage du produit ou sur le site du fabricant. website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.