Lepro 11-inch 24W Flush Mount LED Ceiling Light User Manual

1. Consignes de sécurité

Veuillez lire attentivement toutes les instructions avant l'installation et l'utilisation. Conservez ce manuel pour toute consultation ultérieure.

• Sécurité électrique : Always turn off the power at the circuit breaker before beginning any electrical work. Ensure proper grounding. If you are unsure about electrical installations, consult a qualified electrician.
• Utilisation en intérieur uniquement : This fixture is designed for indoor use.
• Résistance à l'eau : The light fixture has an IP54 water-resistant and dustproof rating, making it suitable for damp locations like bathrooms and kitchens. However, it is not designed for direct water immersion.
• Non dimmable : This LED ceiling light is non dimmable. Do not connect it to a dimmer switch, as this may damage the fixture.
• Chaleur: Bien que les lampes LED produisent moins de chaleur que les ampoules traditionnelles, assurez-vous d'une ventilation adéquate autour du luminaire.
• Enfants: Keep packaging materials away from children to avoid danger of suffocation.

2. Produit terminéview

The Lepro 11-inch Flush Mount LED Ceiling Light provides efficient and bright illumination for various indoor spaces. Its slim design integrates seamlessly with modern interiors.

• Modèle: PR1500035-WW
• Taille: 11 inches (28 cm) diameter, 1.97 inches (5 cm) height.
• Pouvoir: 24 watts
• Luminosité: 2400 lumens
• Température de couleur: 3000 Kelvin (Blanc chaud doux)
• Résistance à l'eau : IP54 (étanche et anti-poussière)
• Durée de vie: Plus de 20,000 heures
• Matériel: Plastique
• IRC: >80 (Color Rendering Index)
• Équivalent: Approximately 200W incandescent equivalent.
• Efficacité énergétique : Saves up to 88% on energy compared to traditional lighting.

Figure 2.1: The Lepro 11-inch LED Ceiling Light providing warm and cozy illumination in a living room setting.

Figure 2.2: The ceiling light illuminating a modern kitchen, showcasing its broad light distribution.

Figure 2.3: The IP54 waterproof design makes this light suitable for bathroom environments.

Figure 2.4: The 24W LED light offers significant energy savings compared to two 100W incandescent bulbs.

Figure 2.5: Product dimensions showing 11-inch diameter and 1.97-inch height, ideal for low ceilings.

3. Guide d'installation

Follow these steps for safe and proper installation of your Lepro LED Ceiling Light. Ensure power is off before starting.

1. Couper l'alimentation : Repérez le disjoncteur qui alimente le luminaire et coupez le courant. Vérifiez que le courant est bien coupé à l'aide d'un testeur de tension.tage testeur.
2. Retirer le support de montage : Gently pull the spring tabs on the light fixture and remove the mounting bracket from the back of the lamp corps.
3. Measure Hole Spacing: Use the removed mounting bracket to measure the appropriate hole spacing for your ceiling type. The bracket supports a minimum distance of 2.7 inches and a maximum distance of 4 inches for mounting holes.
4. Installez le support de montage :
   • Pour plafond en bois : Use the provided screws to directly fix the mounting bracket to the wooden ceiling.
   • For Cement Ceiling: Drill two holes at the measured spacing, insert the plastic anchors, then fix the mounting bracket with screws.
   • For Junction Box: Align the mounting bracket with the existing holes on your junction box and secure it with the provided screws.
5. Préparation du câblage : Open the waterproof wiring compartment on the light fixture.
6. Connecter les fils : Insert the household electrical wires into the electrical connections labeled 'N' (Neutral) and 'L' (Live) on the fixture. Ensure a secure connection.
7. Câblage sécurisé : Straighten out the wires, place the rubber sealant into position, and close the wiring compartment securely.
8. Montez le Lamp: Align the light fixture with the installed mounting bracket. Pull the lamp's spring tabs and latch it onto the bracket, pushing the light firmly against the ceiling until it clicks into place.
9. Restaurer l'alimentation : Remettez le courant au disjoncteur.

Figure 3.1: Visual guide for installing the ceiling light, showing bracket removal, wire connection, and final mounting.

4. Mode d'emploi

This Lepro LED Ceiling Light is designed for simple operation.

• Marche/Arrêt : Use a standard wall switch to turn the light fixture on or off.
• Non dimmable : As noted in the safety information, this fixture is not dimmable. It will operate at full brightness when switched on.

5. Entretien

The Lepro LED Ceiling Light requires minimal maintenance due to its integrated LED design and durable construction.

• Nettoyage: Assurez-vous que l'appareil est hors tension avant de le nettoyer. Essuyez-le avec un chiffon doux, sec ou légèrement humidifié.amp tissu. N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.
• Aucun remplacement d'ampoule : The LED lights are integrated and designed to last over 20,000 hours, eliminating the need for bulb replacement.
• Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified professional.

6. Dépannage

If you encounter issues with your Lepro LED Ceiling Light, refer to the following common troubleshooting steps:

7. Spécifications

8. Garantie et assistance

This Lepro LED Ceiling Light comes with a Garantie de 2 ans du fabricant.

For further assistance, product information, or to explore other Lepro products, please visit the official Lepro Store:

Visitez le magasin des lépreux