Panasonic ER-SB40-K803

Panasonic ER-SB40-K803 Beard Trimmer User Manual

Model: ER-SB40-K803

1. Introduction

The Panasonic ER-SB40-K803 is a high-performance beard trimmer designed for precise grooming. It features a patented linear motor for consistent power, 45-degree stainless steel blades, and 20 length settings for versatile styling. This trimmer supports both cordless and corded operation and is fully waterproof for easy cleaning.

Composants inclus :

  • Panasonic ER-SB40-K803 Trimmer
  • Attachement de peigne
  • Adaptateur secteur/alimentation
  • Brosse de nettoyage
  • Huile de lame
  • Pochette de voyage
  • Manuel d'instructions
Panasonic ER-SB40-K803 beard trimmer and accessories laid out

Image 1.1: The Panasonic ER-SB40-K803 trimmer with its complete set of accessories, including the comb attachment, charging cable, cleaning brush, oil, and travel pouch.

2. Installation

2.1 Charge initiale

Before first use, fully charge the Panasonic ER-SB40-K803 trimmer. Connect the AC adapter to the trimmer and plug it into a power outlet. The LED battery indicator will show charging status. A full charge takes approximately 1 hour and provides up to 60 minutes of cordless operation.

2.2 Fixation de l'accessoire peigne

To attach the comb, align it with the trimmer head and push it firmly until it clicks into place. Ensure it is securely fastened before use.

Close-up of the comb attachment for the beard trimmer

Image 2.1 : Un aperçu détaillé view of the comb attachment, designed for precise length control during trimming.

3. Mode d'emploi

3.1 Mise sous/hors tension

Press the power button once to turn the trimmer on. Press it again to turn it off.

3.2 Réglage de la longueur

Use the convenient adjustment dial to select your desired cutting length. The trimmer offers 20 settings from 0.5 mm to 10 mm, in 0.5 mm increments.

Close-up of the length adjustment dial on the Panasonic beard trimmer

Image 3.1: The ergonomic dial allows for easy and precise adjustment of cutting lengths.

3.3 Tailler sa barbe

Hold the trimmer with the blades facing your beard. Move the trimmer against the direction of hair growth for an even trim. The trimmer can be used for both dry and wet shaving, including with shaving foam.

Man using the Panasonic beard trimmer to style his beard

Image 3.2: A user demonstrating the beard trimmer in action, achieving a precise and clean look.

Man using the Panasonic beard trimmer with shaving foam for a wet shave

Image 3.3: The trimmer is suitable for wet use, allowing for comfortable shaving with foam.

3.4 Verrouillage de voyage

To activate or deactivate the travel lock, press and hold the power button for several seconds. This prevents accidental activation during transport.

4. Entretien

4.1 Nettoyage

The trimmer's waterproof design allows for easy cleaning under running water after each use. Ensure the trimmer is turned off before cleaning.

Hand rinsing the Panasonic beard trimmer under running water

Image 4.1: The trimmer's waterproof construction allows for quick and hygienic cleaning under tap water.

Panasonic beard trimmer covered in water droplets on a wet surface

Image 4.2: The trimmer is designed to withstand water, making cleaning simple and effective.

4.2 Lubrification des lames

Apply a drop of the provided blade oil to the blades before and after each use. This ensures smooth operation and extends blade life. After applying oil, turn on the trimmer for about 5 seconds to distribute the oil.

4.3 Entretien de la batterie

To maintain battery health, ensure the battery is fully charged at least once every 6 months, especially if not used for extended periods. Do not store the battery completely discharged for long durations. If the battery is very low, charge it for at least 1 minute before use.

5. Dépannage

5.1 Device Noisy or Overheating

If the trimmer becomes noisy or overheats, it may indicate insufficient lubrication. Turn off the device, remove the blade, apply a drop of oil to each indicated point on the blade, then reattach the blade. Turn the device on for approximately 5 seconds to allow the oil to spread.

5.2 Trimmer Not Turning On

Check if the battery is charged. If the battery is low, charge the trimmer for at least 1 minute. Ensure the travel lock is not activated (press and hold the power button to toggle).

6. Spécifications

FonctionnalitéSpécification
Numéro de modèleER-SB40-K803
Source d'énergieCordless (Rechargeable Battery) / Corded
Type de batterie1 batterie lithium-ion
Temps de chargeEnviron 1 heure
Durée de fonctionnementEnviron 60 minutes (sans fil)
Paramètres de longueur20 settings (0.5 mm to 10 mm, 0.5 mm increments)
Matériau de la lameAcier inoxydable
ÉtancheOui
Dimensions (L x l x H)17.9 x 4.8 x 4.5 cm (45 x 48 x 179 mm)
Poids180 grammes
CouleurNoir

7. Garantie et assistance

7.1 Garantie du fabricant

This Panasonic ER-SB40-K803 beard trimmer comes with a Garantie constructeur d'un anVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.

7.2 Assistance clientèle

For technical assistance, spare parts, or warranty service, please contact Panasonic customer support in your region. Refer to the contact information provided in the packaging or on the official Panasonic website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.