1. Introduction
Thank you for choosing the deleyCON 20m VGA 15-Pin Monitor Cable, Model MK1759. This manual provides essential information for the proper setup, operation, and maintenance of your VGA cable. Please read these instructions carefully to ensure optimal performance and longevity of the product.
This image displays the deleyCON 20m VGA cable, coiled for storage, highlighting its black color and the gold-plated 15-pin D-Sub connectors on both ends.
2. Consignes de sécurité
- Avoid bending or kinking the cable sharply, as this can damage internal wires and affect signal quality.
- N’exposez pas le câble à des températures extrêmes, à la lumière directe du soleil ou à l’humidité.
- Ensure connectors are clean and free from dust before connecting.
- Lors du branchement ou du débranchement d'un câble, saisissez toujours le boîtier du connecteur et non le câble lui-même.
- Tenir hors de portée des enfants.
3. Contenu du colis
Le forfait comprend:
- 1 x deleyCON 20m VGA 15-Pin Monitor Cable (Model MK1759)
4. Configuration et connexion
The deleyCON VGA cable is designed for connecting devices with VGA/S-VGA ports, such as PCs, laptops, monitors, and projectors. Follow these steps for proper connection:
- Identify VGA Ports: Locate the VGA output port on your source device (e.g., PC, laptop) and the VGA input port on your display device (e.g., monitor, projector). VGA ports are typically blue and have 15 pins.
- Connectez le câble : Carefully align one end of the deleyCON VGA cable with the VGA output port on your source device. Gently push the connector in until it is fully seated.
- Sécuriser la connexion : Tighten the two thumbscrews on the VGA connector to secure it firmly to the port. This prevents accidental disconnection and ensures a stable signal.
- Se connecter à l'écran : Repeat steps 2 and 3 for the other end of the VGA cable, connecting it to the VGA input port on your display device.
- Allumer les appareils : Once both ends are securely connected, power on your source device and display device. The display should automatically detect the signal. If not, you may need to select the correct input source on your monitor/projector.
This image shows the deleyCON VGA cable properly connected from the VGA output of a desktop computer to the VGA input of a projector, ready for display.
The deleyCON VGA cable is depicted connecting a desktop computer to a monitor, illustrating a typical setup for video output.
5. Mode d'emploi
The deleyCON VGA cable is a passive component designed for reliable analog video signal transmission. Once connected as described in the Setup section, it operates automatically:
- Transmission du signal: The cable transmits analog video signals bidirectionally between your source and display devices.
- Résolution prise en charge : It supports all resolutions up to 1080p Full HD, providing clear and color-rich images.
- Performances optimales : The 24-carat gold-plated contacts and triple shielding ensure minimal signal loss and protection against electromagnetic interference, even over the 20-meter length.
6. Entretien
Proper care will extend the life of your deleyCON VGA cable:
- Nettoyage: Utilisez un chiffon doux et sec pour essuyer le câble et les connecteurs. N'utilisez pas de nettoyants liquides ni de solvants.
- Stockage: When not in use, coil the cable loosely (as shown in the product images) to prevent kinks and store it in a cool, dry place away from direct sunlight.
- Manutention: Avoid pulling, twisting, or stretching the cable excessively. Always handle by the connector ends.
The deleyCON 20m VGA cable shown neatly coiled, illustrating its robust construction and flexible design.
7. Dépannage
If you experience issues with your VGA cable, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Aucune image affichée | Loose connection, incorrect input source, device not powered on. | Ensure both ends of the cable are securely fastened with screws. Check that the display is set to the correct VGA input. Verify both devices are powered on. |
| Poor image quality (blurry, distorted, color issues) | Loose connection, cable damage, incompatible resolution. | Tighten connections. Inspect the cable for visible damage. Ensure your source device's resolution is supported by the display and cable (up to 1080p Full HD). |
| Affichage scintillant | Interference, loose connection. | Ensure the cable is not running parallel to power cables or other sources of electromagnetic interference. Check and secure connections. |
If the problem persists after trying these solutions, contact deleyCON customer support.
8. Spécifications
| Fonctionnalité | Description |
|---|---|
| Numéro de modèle | MK1759 |
| Marque | deleyCON |
| Type de câble | VGA / S-VGA Monitor Cable |
| Type de connecteur | 15-pin D-Sub (Male to Male) |
| Longueur du câble | 20 mètres |
| Couleur | Noir |
| Matériau conducteur intérieur | 99.99% Oxygen-Free Copper |
| Blindage | Triple Shielded (Double Shielding + Ferrite Core) |
| Caractéristiques du connecteur | 24-carat Gold-plated contacts, Screw-in mechanism, PVC/ABS molded plugs |
| Résolution prise en charge | Jusqu'à 1080p Full HD |
| Impédance | Precise 75 Ohm |
| Direction du signal | Bidirectionnelle |
| Appareils compatibles | PC, Laptop, Monitor (LED, LCD, TFT, Plasma), TV, Projector, KVM Switch, DVR, Industrial Equipment, Medical Equipment, Security Surveillance, CAD Workstations, Graphic Workstations, Scientific Instruments |
| Utilisation recommandée | For screens 17 inches (43 cm) or larger |
| Conformité | RoHS |
| Poids | 1622 gramme |
| Matériau extérieur | Chlorure de polyvinyle (PVC) |
An illustrative diagram demonstrating the wide range of devices compatible with the deleyCON VGA cable, including PCs, laptops, monitors, and projectors.
9. Garantie et assistance
For warranty information or technical support regarding your deleyCON VGA cable, please refer to the documentation provided with your purchase or visit the official deleyCON website. Please have your model number (MK1759) available when contacting support.