1. Introduction
Thank you for choosing the Hansa Basic Jet 3-Jet Shower/Hand Shower. This manual provides essential information for the safe installation, operation, and maintenance of your new shower head. Please read these instructions carefully before use and retain them for future reference.
The Hansa Basic Jet is designed to provide a versatile showering experience with three distinct spray modes and a durable chrome finish.
Image 1.1: The Hansa Basic Jet 3-Jet Shower/Hand Shower, showcasing its chrome finish and nozzle design.
2. Consignes de sécurité
Veuillez respecter les consignes de sécurité suivantes afin d'éviter toute blessure ou tout dommage au produit :
- Assurez-vous que tous les raccords sont bien fixés et étanches afin d'éviter les fuites.
- Do not use abrasive cleaners or solvents on the shower head, as this may damage the finish.
- Coupez toujours l'arrivée d'eau principale avant toute installation ou opération de maintenance.
- En cas de doute sur une étape de l'installation, consultez un plombier qualifié.
- The maximum operating temperature for this product is 60°C (140°F).
3. Contenu du colis
Vérifiez que tous les composants sont présents dans le package :
- Hansa Basic Jet 3-Jet Shower/Hand Shower (Model 44630300)
- Manuel d'instructions
Note: The shower hose and wall bracket are typically sold separately.
4. Configuration et installation
Follow these steps to install your Hansa Basic Jet Shower/Hand Shower:
- Préparez la zone d'installation : Assurez-vous que l'arrivée d'eau principale de votre douche est coupée.
- Retirer l'ancien pommeau de douche (le cas échéant) : Dévissez votre pommeau de douche actuel du flexible de douche.
- Connect the New Shower Head: The Hansa Basic Jet features a standard G 1/2 hose connection. Screw the new shower head onto your existing shower hose. Hand-tighten first, then use a wrench to gently tighten, ensuring not to overtighten.
- Vérifiez les fuites : Turn on the main water supply and check all connections for any leaks. If leaks occur, tighten the connection slightly more.
Image 4.1: Isometric view of the shower head, illustrating the G 1/2 hose connection point at the base of the handle.
5. Mode d'emploi
Your Hansa Basic Jet Shower/Hand Shower offers three distinct spray modes for a customized showering experience. To switch between modes, gently rotate the spray plate on the shower head.
- Mode détente : Provides a soft, wide spray for a gentle and soothing shower.
- Refreshing Mode: Delivers a more focused and invigorating spray, ideal for rinsing.
- EcoFlow Mode: Designed to reduce water consumption while maintaining an effective spray.
Image 5.1: The Hansa Basic Jet shower head in operation, demonstrating a typical spray pattern.
6. Entretien
Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower head.
Nettoyer la pomme de douche
- Nettoyage quotidien : Wipe the shower head with a soft, damp chiffon après chaque utilisation pour éviter les taches d'eau et l'accumulation de résidus de savon.
- Élimination du calcaire : The Hansa Basic Jet features anti-limescale technology. For stubborn limescale deposits, gently rub the silicone nozzles to dislodge mineral buildup.
- Nettoyage en profondeur: For a more thorough clean, use a mild soap solution or a specialized bathroom cleaner designed for chrome finishes. Apply with a soft cloth, rinse thoroughly with water, and dry immediately to prevent water spots.
- Éviter: Do not use abrasive sponges, scouring pads, or harsh chemical cleaners (e.g., bleach, ammonia-based products) as these can damage the chrome finish and plastic components.
7. Dépannage
If you encounter issues with your shower head, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Faible débit d'eau | Clogged nozzles due to limescale; low water pressure from supply. | Clean the nozzles by rubbing them. Check your home's water pressure. Ensure the minimum flow rate of 9 L/min is met. |
| Motif de pulvérisation irrégulier | Blocked nozzles. | Clean the nozzles thoroughly to remove any blockages. |
| Leaks at hose connection | Connexion desserrée ; rondelle usée. | Tighten the hose connection. Replace the washer if it appears damaged. |
8. Spécifications
Detailed technical specifications for the Hansa Basic Jet Shower/Hand Shower:
- Numéro de modèle : 44630300
- Marque: Hanse
- Matériel: Plastique (composite)
- Finition: Chrome
- Diamètre de la tête : 95 mm (3.74 pouces)
- Connexion de tuyau: Sol 1/2
- Number of Spray Modes: 3 (Relaxing, Refreshing, EcoFlow)
- Débit: 14 L/min (at 3 bar flow pressure)
- Débit minimum recommandé : 9 L/min
- Dimensions du produit : 3.74 x 3.74 x 8.66 pouces
- Poids de l'article : 5.3 onces
- Caractéristiques spéciales : Eco flow control, Anti-limescale technology
Image 8.1: Technical drawing illustrating the dimensions (diameter 95mm, length 180mm) and G 1/2 hose connection of the Hansa Basic Jet shower head.
9. Garantie et assistance
For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official Hansa website. If you require technical assistance or have questions not covered in this manual, please contact Hansa customer support.