Manuel d'utilisation du réveil radio-piloté Technoline WT 486

1. Introduction et plusview

The Technoline WT 486 is a radio-controlled alarm clock designed for reliable timekeeping and versatile alarm functions. It features an AM/FM radio with station memory, dual programmable alarms, a snooze function, and a sleep timer. The large green digital display offers excellent readability and adjustable brightness for comfortable viewdans n'importe quel environnement.

2. Contenu du colis

Veuillez vérifier que tous les articles sont présents et en bon état :

• Technoline WT 486 Radio-Controlled Alarm Clock
• Adaptateur secteur
• 1 x CR2032 Battery (for backup)
• Manuel de l'utilisateur (ce document)

3. Installation

3.1 Connexion d'alimentation

Connect the provided power adapter to the DC input port on the back of the alarm clock and then plug it into a standard wall outlet. The display will illuminate.

3.2 Installation de la batterie de secours

Locate the battery compartment on the bottom or back of the unit. Insert one CR2032 battery, ensuring the correct polarity (+/-). This battery serves as a backup to retain time and alarm settings during a power outage.

3.3 Synchronisation horaire initiale

Upon initial power-up, the clock will automatically attempt to synchronize its time with the radio-controlled signal. This process may take several minutes. Ensure the clock is placed away from electronic interference for optimal reception. The radio signal icon (often resembling a Wi-Fi symbol) on the display will indicate successful synchronization.

Image: Front display of the Technoline WT 486 radio-controlled alarm clock, showing the time and various indicators like alarm 1 (A1), alarm 2 (A2), sleep timer (SL), and radio signal icon.

4. Mode d'emploi

4.1 Time Display Format (12/24 Hour)

Press the "TIME SET" button (or similar, refer to physical buttons on your device) to toggle between 12-hour and 24-hour time display formats. In 12-hour format, "AM" or "PM" indicators will appear.

4.2 Setting Alarms (A1, A2)

The clock features two independent alarms, A1 and A2.

1. Press and hold the "ALARM 1" or "ALARM 2" button until the alarm time flashes on the display.
2. Use the "HOUR" and "MINUTE" buttons to adjust the desired alarm time.
3. Press the "ALARM 1" or "ALARM 2" button again to confirm the time.
4. Repeatedly press the "ALARM 1" or "ALARM 2" button to cycle through alarm modes: Daily, Weekdays (Mon-Fri), Weekend (Sat-Sun), or One-Time. The corresponding indicator will light up.
5. To activate/deactivate an alarm, press the respective "ALARM" button briefly. A small indicator (A1 or A2) will appear on the display when the alarm is active.

4.3 Fonction de répétition

When an alarm sounds, press the "SNOOZE" button (usually a large button on top) to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after the snooze period. To turn off the alarm completely, press any other button.

Fonctionnement radio AM/FM 4.4

The WT 486 includes an integrated AM/FM radio.

• Activation/désactivation : Press the "RADIO" button to turn the radio on or off.
• Sélection de bande : Press the "BAND" button to switch between AM and FM frequencies.
• Tuning: Use the "TUNE +" or "TUNE -" buttons to manually adjust the frequency. Press and hold these buttons for automatic station scanning.
• Mémoire de la station : To save a station, tune to the desired frequency, then press and hold the "MEM" button. Use the "TUNE +" or "TUNE -" buttons to select a preset number, then press "MEM" again to confirm. To recall a saved station, briefly press the "MEM" button and then use "TUNE +" or "TUNE -" to select the preset.
• Contrôle du volume : Use the "VOL +" and "VOL -" buttons to adjust the volume. There are 16 volume levels.

4.5 Minuterie de veille

La minuterie de mise en veille permet à la radio de fonctionner pendant une durée définie avant de s'éteindre automatiquement.

1. While the radio is playing, press the "SLEEP" button. The sleep timer duration will appear on the display.
2. Repeatedly press the "SLEEP" button to cycle through available sleep timer durations (e.g., 10, 20, 30, 60, 90 minutes, or OFF).
3. The radio will automatically turn off after the selected time. The "SL" indicator on the display will show when the sleep timer is active.

4.6 Réglage de la luminosité de l'affichage

The display brightness is continuously dimmable. Locate the "DIMMER" dial or button (refer to your device's physical controls). Rotate the dial or press the button repeatedly to adjust the display brightness to your preferred level.

5. Entretien

• Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
• Remplacement de la batterie : Replace the CR2032 backup battery annually or when the clock fails to retain settings during a power outage. Dispose of used batteries responsibly.
• Placement: Évitez de placer l'horloge en plein soleil, près de sources de chaleur ou dans des zones à forte humidité.

6. Dépannage

7. Spécifications

• Modèle: WT486
• Dimensions: 220 x 39 x 102 mm (Largeur x Profondeur x Hauteur)
• Alimentation: AC/DC Adapter (included), 1 x CR2032 battery (for backup)
• Type d'affichage : Numérique, LED verte
• Format de l'heure : 12/24 heures sélectionnable
• Alarmes: 2 programmable alarms (Daily, Weekdays, Weekend, One-Time)
• Fonction de répétition: Environ 9 minutes
• Radio: AM/FM with station memory
• Contrôle du volume : 16 niveaux
• Minuterie de veille: Oui
• Luminosité de l'écran : Gradable en continu
• Matériel: Plastique

8. Garantie et assistance

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact your retailer. For technical support or further assistance, please visit the Technoline official website ou contactez leur service client.