Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your AmScope 1200X Kids Student Beginner Microscope Kit. This kit is designed to introduce young scientists to the world of microscopy with a durable and easy-to-use instrument.
Image : Terminéview of the AmScope microscope kit highlighting key features like magnifications, metal arm, illumination, and specimen stage.
Contenu du colis
Verify that all items listed below are present in your kit:
- 1x Monocular Microscope with Metal Arm (120X-1200X magnification)
- 1x Eyepiece (8X)
- 1x Eyepiece (20X)
- 1x étui de transport
- 1x Petri Dish
- 1x Plastic Tweezer
- 1x Spare Bulb
- 1x Plastic Scalpel
- 1x Plastic Spatula
- 1x Plastic Stirring Rod
- 1x Pipette
- 5 diapositives préparées
- 7x diapositives vierges
- 16x Slide Labels
- 3x Collecting Vials
- 2x piles AA
- 1x "The World of The Microscope" Book
Image : Une image détaillée view of the complete accessory kit, including the microscope, eyepieces, slides, tools, and vials, all neatly organized within the carrying case.
Image: The included "The World of The Microscope" book, designed to guide users through scientific exploration.
Installation
- Unpack the Microscope: Carefully remove the microscope and all accessories from the carrying case.
- Insérez les piles : Locate the battery compartment at the base of the microscope. Insert 2 AA batteries, ensuring correct polarity.
- Place the Microscope: Position the microscope on a stable, flat surface.
- Select Eyepiece: Choose either the 8X or 20X eyepiece and insert it into the top tube of the microscope.
- Ajuster l'éclairage : The microscope features both an LED light and a reflecting mirror.
- Pour Éclairage LED: Turn the illumination switch to activate the built-in LED light.
- Pour Natural Illumination: Rotate the reflecting mirror to direct ambient light onto the specimen.
Image: A child holding the carrying case, with an inset showing the battery compartment at the base of the microscope where 2 AA batteries are inserted.
Mode d'emploi
1. Preparing a Specimen Slide
- Pour Diapositives préparées: Simply place a prepared slide onto the stage.
- Pour Diapositives vierges: Use the provided tools (pipette, tweezers, scalpel) to place a small, thin specimen onto a blank slide. Add a drop of water if necessary, and cover with a coverslip.
2. Placing the Slide
Place the prepared slide onto the microscope stage. Utilisez le stage clips to secure the slide in place.
Image : Un surview of the microscope, with a callout pointing to the specimen stage and clips, illustrating how slides are secured for viewing.
3. Adjusting Illumination
Ensure adequate lighting for your specimen. Use the built-in LED light for direct illumination or adjust the reflecting mirror to capture ambient light.
Image : Un gros plan view of the microscope's base, showing both the built-in LED light and the adjustable reflecting mirror for illumination.
4. Selecting Magnification
Rotate the revolving nosepiece to select an objective lens. Start with the lowest magnification (e.g., 120X) to locate your specimen, then switch to higher magnifications as needed. The total magnification is the eyepiece magnification multiplied by the objective lens magnification.
- Available Magnifications: 120X, 240X, 300X, 480X, 600X, 1200X.
5. Mise au point
- Regardez à travers l'oculaire.
- Slowly turn the coarse focus knob to bring the specimen into approximate focus.
- Use the fine focus knob for precise focusing and to achieve a clear image.
Image : Examples of various magnified cells (onion, honey bee leg, leaf, intestinal) as seen through a microscope, demonstrating the detail achievable.
Entretien
- Nettoyage des lentilles : Use a soft, lint-free cloth specifically designed for optical lenses to clean the eyepieces and objective lenses. Do not use abrasive materials or harsh chemicals.
- Nettoyage du corps : Essuyez le corps du microscope avec un chiffon doux et sec.amp cloth. Avoid getting moisture into electrical components.
- Stockage: When not in use, store the microscope in its carrying case in a dry, dust-free environment. Remove batteries if storing for extended periods to prevent leakage.
- Manutention: Always carry the microscope by its metal arm and base. Avoid sudden impacts or dropping the instrument.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| No light from LED. | Les piles sont déchargées ou mal insérées. | Vérifiez la polarité des piles et remplacez-les par des piles AA neuves. |
| L'image est floue ou hors focus. | Incorrect focus adjustment; objective lens not properly aligned. | Adjust coarse and fine focus knobs. Ensure objective lens clicks into place. |
| Dark or uneven field of view. | Insufficient illumination; objective lens not fully rotated. | Adjust LED light or reflecting mirror. Rotate objective lens until it clicks into position. |
| Dust or spots visible in the image. | Dust on eyepiece, objective lens, or slide. | Clean lenses and slides with an optical cleaning cloth. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | M30-ABS-KT1-W-WM |
| Plage de grossissement | 120X, 240X, 300X, 480X, 600X, 1200X |
| Oculaires | 8X, 20X |
| Éclairage | Built-in LED and Reflecting Mirror |
| Source d'énergie | 2 piles AA (incluses) |
| Matériau du corps | Durable Metal Arm |
| Dimensions (L x l x H) | 13 x 6 x 9 pouces |
| Poids de l'article | 3.65 livres |
| Couleur | Blanc |
Informations sur la garantie
AmScope products are designed for quality and durability. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official AmScope webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
Soutien
For further assistance, technical support, or to inquire about replacement parts, please contact AmScope customer service. You can typically find contact information on the AmScope websur le site ou auprès du détaillant où le produit a été acheté.
AmScope Official Website: www.amscope.com