1. Introduction
The CURRENT USA eFlux DC Flow Pump is designed to provide efficient and controllable water flow for various aquatic systems. This pump features a sealed DC motor and magnetic drive, allowing for versatile use in both marine and freshwater environments. Its advanced design ensures quiet operation and significant energy savings compared to traditional AC pumps.
Caractéristiques principales :
- Débit réglable : DC-powered for complete flow control.
- Submersible or External Use: Can be installed inline or submerged.
- Efficacité énergétique : Up to 65% energy savings.
- Fonctionnement silencieux : Engineered for minimal noise.
- Faible volume sûrtage: Operates on 24V DC.
- LOOP Compatible: Integrates with the LOOP system for enhanced control.
- Démarrage en douceur: doucement ramps pump to speed.
- Détection électronique CI : Protects the pump if no water is present.
Image: The CURRENT USA eFlux DC Flow Pump operating in a vibrant aquarium setup.
2. Consignes de sécurité
- Coupez toujours l'alimentation électrique avant d'effectuer toute opération de maintenance ou d'installation.
- The pump operates on safe, low voltage 24V DC. Ensure the power supply is correctly connected and rated for the pump.
- Do not run the pump dry. The integrated IC electronic detection system is designed to protect the pump if no water is present, but prolonged dry running should be avoided.
- Assurez-vous que tous les raccords sont bien fixés afin d'éviter les fuites.
- Keep the controller and power supply away from water to prevent electrical hazards.
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- eFlux DC Flow Pump (1050 GPH model)
- DC Pump Controller
- Power Supply (24V DC)
- Cordon d'alimentation
- Hose Barb Fittings (various sizes for 3/4 and 1 inch tubing)
- O-rings/Gaskets
- Strainer (for submersible use)
- Manuel d'utilisation
Image: All components included in the eFlux DC Flow Pump package.
4. Installation
The eFlux DC Flow Pump offers flexible installation options, allowing it to be used either fully submerged or externally (inline).
4.1. Choix de la méthode d'installation
- Submersible : Place the pump directly into your sump or aquarium. Ensure the strainer is attached to the inlet to prevent debris from entering the pump.
- External (Inline): Install the pump outside the water, connecting it to your plumbing system. Quick-couple hose barb fittings are provided for easy connection.
Image: Visual guide for submersible and inline/external pump installation.
4.2. Connecting the Pump and Controller
- Attach the appropriate hose barb fittings to the pump's inlet and outlet. For submersible use, ensure the strainer is securely attached to the inlet.
- Connect the pump's power cable to the DC Pump Controller.
- Connect the power supply to the DC Pump Controller.
- Branchez le bloc d'alimentation sur une prise électrique appropriée.
Video: Installation Display
Video Description: This video demonstrates the physical installation process of the pump, including attaching fittings and connecting the pump to its controller and power supply.
5. Mode d'emploi
The eFlux DC Flow Pump features a user-friendly controller for precise flow adjustment and special modes.
5.1. Adjustable Flow Control
Unlike traditional AC pumps, the eFlux DC pump allows you to adjust the flow rate directly. Simply turn the dial on the controller to increase or decrease the water flow. The pump can be adjusted from 20% to 100% of its maximum flow capacity. Adjusting the flow also impacts power consumption, allowing for energy savings at lower flow rates.
5.2. Feed Mode
The controller includes a 'Feed Mode' function. When activated, the pump's flow rate will reduce to 30% for a duration of 10 minutes. This allows fish and corals to feed without being disturbed by strong currents and prevents food from being quickly drawn into filtration systems. After 10 minutes, the pump automatically resumes its previous setting.
5.3. LOOP Compatibility
The eFlux DC Flow Pump is LOOP compatible. When connected to a LOOP network, the controller provides an indicator LED for when the pump is in Feed Mode. The controller also features micro USB ports at the bottom, allowing connection to other eFlux DC flow pumps, wave pumps, or your lighting system hub to create an integrated LOOP network.
Video: Speed Control and Feed Mode Demonstration
Video Description: This video illustrates how to adjust the pump's speed using the controller and demonstrates the Feed Mode function, showing the reduction in water flow.
Video: Flow Adjustment and Power Consumption
Video Description: This video highlights the adjustable flow feature of the eFlux DC pump and demonstrates how adjusting the flow rate directly impacts the power consumption, offering energy efficiency.
6. Performance Chart
To select the optimal eFlux DC Flow Pump for your system, it is recommended to calculate your total system volume (aquarium volume + sump volume) and aim for a 5x turnover rate per hour through your filter. Once you have this target flow rate, refer to the performance chart below to identify the appropriate pump model.
Image: Performance chart illustrating the relationship between flow rate, head pressure, and recommended aquarium volume for various eFlux DC Flow Pump models.
| Modèle | Description | Flow Range GPH | Watts Range | ~Flow Rate @ 5ft. Head GPH | Maximum Recommended Aquarium Volume |
|---|---|---|---|---|---|
| 6009 | DC Flow Pump 1050 | 210-1050 | 6-30 | 500 GPH | 100 gallons (90 gal. tank) |
| 6010 | DC Flow Pump 1900 | 380-1900 | 11-55 | 1000 GPH | 200 gallons (150 gal. aquarium) |
| 6011 | DC Flow Pump 3170 | 635-3170 | 16-80 | 2000 GPH | 350 gallons (250 gal. aquarium) |
7. Entretien
Regular maintenance ensures optimal performance and longevity of your eFlux DC Flow Pump. The pump is designed for tool-less disassembly for easy cleaning.
- Débrancher l'alimentation : Always unplug the pump from the power source before cleaning.
- Démontage: Gently twist and pull the pump housing to separate it from the motor. The impeller housing can then be removed to access the impeller.
- Nettoyer la turbine et le carter : Remove any debris, algae, or mineral buildup from the impeller, impeller shaft, and pump housing. A soft brush or cloth can be used. For stubborn mineral deposits, a mild acid solution (like vinegar) can be used, followed by thorough rinsing.
- Inspecter les composants : Check the impeller for any signs of wear or damage. Ensure the O-rings are clean and properly seated to maintain a watertight seal.
- Remontage: Reassemble the pump by aligning the components and twisting them back into place. Ensure all parts are securely fitted before reconnecting power.
Video: Tool-less Disassembly for Maintenance
Video Description: This video demonstrates the tool-less disassembly of a similar pump model, showing how to access the impeller for cleaning and maintenance.
8. Dépannage
- La pompe ne fonctionne pas :
- Check power connections to the outlet, power supply, and controller.
- Ensure the pump is submerged in water if used submersibly. The IC electronic detection will prevent dry running.
- Vérifiez que la turbine ne présente aucune obstruction ni aucun dommage.
- Débit réduit :
- Check the controller dial setting; increase the flow rate if necessary.
- Clean the impeller and pump housing for any debris or buildup.
- Ensure intake strainer is not clogged.
- Verify plumbing for any blockages or kinks.
- Bruit inhabituel :
- Inspectez la turbine pour détecter la présence de corps étrangers ou de dommages.
- Ensure the pump is securely placed and not vibrating against surfaces.
- Bord d'eautage/Stuck Protection: The pump is equipped with self-protection features. If the pump detects a water shortage or a stuck impeller, it will automatically activate protection to prevent damage. Address the underlying issue (e.g., add water, clear obstruction) before restarting.
Video: Water Shortage and Stuck Protection
Video Description: This video demonstrates the pump's self-protection mechanism in case of water shortage or a stuck impeller, highlighting its safety features.
9. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | ACTUEL |
| Numéro de modèle | 6009 |
| Débit maximal | 1050 GPH (3974 litres par heure) |
| Source d'énergie | Alimentation électrique filaire (24 V CC) |
| Consommation d'énergie | 6-30 Watts |
| Hauteur maximale de la tête | 10.5 pieds |
| Dimensions du produit (L x l x H) | 8.5" x 6.9" x 5.3" |
| Poids de l'article | 3.63 livres |
| Matériel | Plastique |
| Couleur | Noir |
| Code UPC | 842959060090 |
10. Garantie et assistance
CURRENT-USA products carry a one-year limited warranty from the date of purchase. If your product is within warranty and you require a replacement part or service, please contact Current-USA customer support. For further assistance or inquiries, please refer to the contact information provided in your product packaging or visit the official CURRENT-USA website.
