GODOX TT600S Wireless Camera Flash Speedlite for Sony Cameras

Introduction

The GODOX TT600S is a versatile 2.4G wireless camera flash speedlite designed for Sony cameras with a Multi Interface Shoe. It offers a powerful GN60 guide number and supports High-Speed Sync (HSS) when used off-camera with a compatible Godox X Trigger System. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your flash unit.

Image: The GODOX TT600S flash unit, highlighting its compatibility with Sony cameras and key features like GN60, 2.4G Wireless, and HSS.

Installation

1. Installation de la batterie

The TT600S requires four AA batteries (not included). Open the battery compartment cover, insert the batteries according to the polarity indicators, and close the cover securely.

Image: Close-up of the battery compartment, showing where to insert the four AA batteries.

2. Montage sur la caméra

Slide the flash unit onto your Sony camera's Multi Interface Shoe until it clicks into place. Secure it by tightening the locking knob if available. Ensure a firm connection for proper communication between the flash and camera.

Image: The hot shoe mount of the flash, ready to be attached to a camera.

3. Marche/Arrêt

Pour allumer le flash, faites glisser l'interrupteur MARCHE/ARRÊT sur la position « MARCHE ». L'écran LCD s'illuminera. Pour l'éteindre, faites glisser l'interrupteur sur la position « ARRÊT ».

4. Basic Controls and LCD Panel

The rear of the flash features an LCD panel and various control buttons for adjusting settings such as flash mode, power output, and zoom. Familiarize yourself with these controls for efficient operation.

Image: The LCD screen and control buttons on the back of the flash unit.

5. Diffuser Attachment

The included diffuser can be easily attached to the flash head to soften harsh shadows and create more natural-looking light. Simply slide it over the flash head until it is secure.

Image: The wide-angle diffuser accessory for the flash.

Modes de fonctionnement

1. Manual Mode (M)

In Manual mode, you have full control over the flash output, adjustable from 1/1 (full power) to 1/128 in 1/3 EV steps. Use the dial to select your desired power level. The zoom range can also be adjusted from 24-200mm (14mm with panel).

Image: Illustration of the flash's GN60 output and adjustable zoom range from 24-200mm.

2. Wireless X System (Master/Slave)

The TT600S features a built-in 2.4G wireless X system, allowing it to function as both a master and slave unit. It supports 32 channels and 5 groups, providing a stable signal up to 100 meters. This enables versatile off-camera lighting setups.

Image: Diagram illustrating the TT600S's role as both a transmitter (master) and receiver (slave) within the Godox 2.4G Wireless X System, compatible with various Godox triggers and flashes.

3. Synchronisation haute vitesse (HSS)

Achieve shutter speeds up to 1/8000s with HSS, allowing you to freeze motion and use wide apertures in bright conditions. Note: HSS is only available when the TT600S is used off-camera with a compatible Godox wireless trigger (e.g., X1T-S, X2T-S, XPro-S, X3-S, X3Pro-S).

Image: The TT600S flash being used off-camera, demonstrating its capability for High-Speed Sync when paired with a Godox X-system trigger.

4. Bounce Flash

The flash head can tilt from -7° to 90° and rotate 360°, allowing you to bounce light off ceilings or walls for softer, more diffused illumination. This flexibility helps in creating natural-looking light in various shooting environments.

Image: The flash head demonstrating its ability to tilt and rotate for bounce lighting.

5. Official Product Video: GODOX TT600S Camera Flash Speedlite

Vidéo : Un officiel au-dessusview of the GODOX TT600S Camera Flash Speedlite, demonstrating its features, battery installation, head articulation, and control panel operation.

Entretien

1. Entretien de la batterie

Always use high-quality AA batteries. For extended shoots, especially events like weddings, carry spare charged batteries. Remove batteries when the flash is not in use for prolonged periods to prevent leakage.

2. Nettoyage

Utilisez un chiffon doux et sec pour nettoyer le flash. Pour les saletés tenaces, un chiffon légèrement plus sec peut être utile.amp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials that could damage the surface or electronic components.

Dépannage

1. Flash non déclenché

• Vérifiez les niveaux de batterie et remplacez-les si nécessaire.
• Ensure the flash is securely mounted on the camera's hot shoe or properly connected to the wireless trigger.
• Verify that the flash is powered on and the mode settings are correct.
• If using off-camera, ensure the trigger and flash are on the same channel and group.

2. Inconsistent Flash Output

• Check the flash power settings in Manual mode.
• Ensure the flash head zoom matches your lens focal length for optimal coverage.
• If using HSS, confirm compatibility with your camera and trigger system.

3. Problèmes de surchauffe

Rapid consecutive flashes can cause the unit to overheat. Allow the flash to cool down if the overheating indicator appears. Reduce flash power or increase recycle time to prevent frequent overheating.

Caractéristiques

Garantie et assistance

Informations sur la garantie

The GODOX TT600S comes with a 2-Year Manufacturer Guarantee. Please retain your proof of purchase for warranty claims.

Assistance clientèle

For technical assistance, troubleshooting, or service inquiries, please contact GODOX customer support through their official website or the retailer where the product was purchased. Refer to the contact information provided in the packaging for specific details.