Technical Precision Replacement Light Bulb for Bowens REFLECTA DIAMATOR AFM

1. Introduction

This manual provides essential information for the safe and effective use of your Technical Precision Replacement Light Bulb for Bowens REFLECTA DIAMATOR AFM. Please read these instructions carefully before installation and operation. This bulb is designed as a direct replacement for the original Bowens REFLECTA DIAMATOR AFM light bulb.

2. Informations importantes sur la sécurité

• Coupure de courant : Always ensure the power supply to the fixture is completely disconnected before attempting to install, remove, or clean the light bulb. Failure to do so may result in electric shock.
• À manipuler avec précaution : Light bulbs, especially halogen or incandescent types, can become very hot during operation. Allow the bulb to cool completely before handling.
• Évitez le contact direct : Ne touchez pas la partie en verre de l'ampoule à mains nues. Le sébum de votre peau peut créer des points chauds et entraîner une défaillance prématurée de l'ampoule. Utilisez un chiffon propre ou des gants pour la manipuler.
• Élimination appropriée : Dispose of old or broken bulbs according to local regulations.
• Utilisation prévue : This bulb is intended for use only in fixtures designed for the Bowens REFLECTA DIAMATOR AFM. Using it in incompatible fixtures may cause damage or safety hazards.

3. Produit terminéview

The Technical Precision Replacement Light Bulb is a high-quality component designed to restore the functionality of your Bowens REFLECTA DIAMATOR AFM equipment. It features a GY6.35 bulb base and operates at 22 Volts with a wattage de 150 Watts.

Figure 3.1 : Plusview of the Technical Precision Replacement Light Bulb. This image shows the clear glass bulb with its internal filament structure and the two-pin GY6.35 base.

Figure 3.2 : Côté view of the replacement light bulb, highlighting the compact design and the robust filament.

4. Instructions d'installation

Follow these steps to safely install the replacement light bulb:

1. Étape 1 : Coupez l'alimentation. Ensure the Bowens REFLECTA DIAMATOR AFM unit is unplugged from the power source and completely cooled down.
2. Step 2: Access Bulb Socket. Carefully open the fixture to access the bulb socket. Refer to your Bowens REFLECTA DIAMATOR AFM manual for specific instructions on accessing the bulb compartment.
3. Étape 3 : Retirez l'ancienne ampoule (le cas échéant). If replacing an existing bulb, gently pull the old bulb straight out from its socket. Avoid twisting.
4. Étape 4 : Insérez la nouvelle ampoule. Holding the new Technical Precision bulb with a clean cloth or gloves, align the two pins of the GY6.35 base with the holes in the socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force it.
5. Step 5: Secure Fixture. Close and secure the bulb compartment of your Bowens REFLECTA DIAMATOR AFM unit.
6. Étape 6 : Rebrancher l'alimentation. Plug the Bowens REFLECTA DIAMATOR AFM unit back into the power source.

Figure 4.1: Close-up of the bulb's GY6.35 base, showing the two pins for insertion into the socket. Ensure these pins are aligned correctly during installation.

5. Fonctionnement

Once installed, the operation of the light bulb is controlled by the Bowens REFLECTA DIAMATOR AFM unit itself. Simply turn on the power to your equipment, and the bulb will illuminate. This bulb features an 'Instant On' capability, providing immediate light output.

6. Entretien

• Nettoyage: If the bulb requires cleaning, ensure the power is off and the bulb is cool. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
• Remplacement: The average life of this bulb is approximately 50 hours. Replace the bulb when its light output diminishes significantly or it ceases to function. Refer to the installation instructions for replacement.

7. Dépannage

• L'ampoule ne s'allume pas :
  • Check if the Bowens REFLECTA DIAMATOR AFM unit is properly plugged into a working power outlet.
  • Verify that the bulb is correctly seated in its socket and the pins are making good contact.
  • Assurez-vous que l'interrupteur d'alimentation de l'appareil est en position « MARCHE ».
  • If the bulb is old, it may have reached the end of its lifespan and requires replacement.
• Les ampoules clignotent :
  • Check the connection of the bulb in its socket. A loose connection can cause flickering.
  • Assurez-vous que l’alimentation électrique est stable.

8. Spécifications

9. Garantie et assistance

As a replacement part, this product is manufactured by Technical Precision. For specific warranty information or technical support, please contact Technical Precision directly or refer to the retailer's return policy. Keep your purchase receipt as proof of purchase.

Fabricant: Précision technique

Contact: Please visit the Technical Precision store on Amazon or their official website pour les coordonnées.