CHANZON 3W RGB 6-Pin High Power LED Chip Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of your CHANZON 3W RGB 6-pin High Power LED Chips. Please read these instructions carefully before installation and operation to ensure optimal performance and product longevity.

2. Produit terminéview

The CHANZON 3W RGB 6-pin High Power LED Chip is a compact and efficient light-emitting component designed for various lighting applications. Each chip features Red, Green, and Blue emitters, allowing for a wide spectrum of colors when properly driven. Key features include:

• Pouvoir: 3 watts (maximum)
• Couleur d'émission : RGB (Red Green Blue)
• Flux lumineux : R:50-60LM / G:80-90LM / B:40-50LM
• Chip Construction: Integrated COB LED Panel with 45mil chips, Double Golden Wire, and Copper Frame for enhanced heat dissipation and durability.
• Durée de vie: Approximately 50,000 hours under recommended operating conditions.

Figure 2.1: CHANZON 3W RGB 6-pin LED chips as supplied in packaging.

Figure 2.2 : Détaillé view of a single 3W RGB LED chip, highlighting the individual color emitters.

Figure 2.3: Internal components of the LED chip, including the copper holder and gold wire connections. The cathode is marked with a '-' and the anode is the other side.

3. Spécifications

Figure 3.1: Detailed electrical and optical specifications for various LED chips, including RGB.

4. Configuration et installation

Proper setup is crucial for the performance and lifespan of your LED chips. These are high-power components and require careful handling.

4.1 Câblage

• The CHANZON 3W RGB 6-pin LED chip has separate pins for Red, Green, and Blue channels. Each color channel must be driven independently.
• Identify the positive (anode +) and negative (cathode -) terminals for each color. The cathode is typically marked with a '-' sign on the LED's bracket.
• Connect each color channel to a dedicated constant current LED driver.

4.2 Gestion de la chaleur

These LED chips generate heat during operation. Adequate heat dissipation is mandatory to prevent overheating and premature failure.

• Always mount the LED chip onto a suitable heat sink system. The working temperature of the chip should remain below 60°C (140°F).
• Use thermal paste or a thermal adhesive between the LED chip's base and the heat sink to ensure efficient heat transfer.
• Consider using active cooling (e.g., a fan) for applications where high ambient temperatures or continuous operation at maximum power are expected.

Figure 4.1: Dimensions and pin configuration for the 3W LED chip, indicating positive terminals for Red, Green, and Blue.

5. Mode d'emploi

To operate the CHANZON 3W RGB 6-pin LED chips, follow these guidelines:

• Alimentation: Use a constant current LED driver. Each color (Red, Green, Blue) requires its own current path.
• Contrôle actuel : The recommended current for each color is 300mA. The maximum current is 600mA per color. Exceeding the maximum current can damage the LED.
• Voltage Exigences : Ensure your driver provides the correct forward voltage for each color: Red (2.0-2.4V), Green (3.0-3.4V), Blue (3.0-3.4V).
• Mélange de couleurs: To achieve various colors, adjust the current supplied to each Red, Green, and Blue channel independently using a suitable controller (e.g., PWM controller).

6. Entretien

These LED chips are designed for long-term reliability with minimal maintenance. However, proper care ensures their extended lifespan:

• Propreté: Keep the LED surface clean and free from dust or debris. Use a soft, dry cloth for cleaning. Avoid abrasive materials or harsh chemicals.
• Gestion thermique : Regularly check that the heat sink is free from obstructions and that the LED chip is securely attached to it. Ensure proper airflow if active cooling is used.
• Conditions environnementales : Operate the LEDs within their specified temperature and humidity ranges. Avoid exposure to excessive moisture or corrosive environments.

7. Dépannage

If you encounter issues with your CHANZON 3W RGB 6-pin LED chips, consider the following:

• La LED ne s'allume pas :
  • Verify power supply connections and polarity (anode/cathode).
  • Ensure the constant current driver is functioning correctly and providing the specified current and voltage.
  • Check for any loose wiring or damaged components.
• Scintillement ou gradation :
  • This often indicates insufficient power or overheating. Check the power supply and heat sink.
  • Ensure the current is within the recommended range (300mA per color).
  • Inspect for poor solder joints or intermittent connections.
• Chaleur excessive :
  • Confirm the LED is properly mounted to an adequate heat sink with thermal paste.
  • Reduce the operating current if the temperature exceeds 60°C (140°F).
  • Ensure sufficient airflow around the heat sink.
• Sortie de couleur incorrecte :
  • Verify that each RGB channel is receiving the correct current from its respective driver.
  • Check the control signals if using a color mixing controller.

8. Applications

The versatility of CHANZON 3W RGB 6-pin LED chips makes them suitable for a wide array of applications, including:

• Ampoules LED
• Cast Lights
• Projecteurs
• Stage Lumières
• Sous-marin Lamps
• Projection Lamps
• Plante élèvent des lumières
• Durcissement UV Lamps (with appropriate UV LED chips)
• Mining Lamps
• DIY Lighting Projects