1. Introduction
Welcome to the user manual for your new Accutime Pokemon Digital LCD Quartz Watch. This guide provides essential information on setting up, operating, maintaining, and troubleshooting your watch to ensure optimal performance and enjoyment. Please read these instructions carefully before using your watch.
Illustration 1.1 : Avant view of the Accutime Pokemon Digital LCD Quartz Watch with illuminated display.
2. Produit terminéview
The Accutime Pokemon Digital LCD Quartz Watch is designed for ease of use and features a vibrant Pokemon theme. Key features include:
- Colorful Pokemon Design: Features popular Pokemon characters on the dial and strap.
- Pop-Up Dial Cover: A unique cover that protects the digital display and adds an interactive element.
- Fonction d'éclairage : Press a button to illuminate the display for easy reading in low light conditions.
- Durable et confortable : Constructed with a clear plastic case and printed rubber straps for everyday wear.
- Sangle réglable : A plastic buckle and keeper allow for a customizable fit on various wrist sizes.
Image 2.1: Watch features including soft silicone strap, LED light show, and durable design.
3. Installation
3.1 Inspection initiale
Upon unpacking, inspect the watch for any visible damage. The watch comes with 4 LR41 (1.5V) product-specific batteries included and pre-installed.
3.2 Réglage de l'heure et de la date
To set the time and date on your digital watch:
- Access Display: Gently lift the pop-up dial cover to reveal the digital display.
- Entrez dans le mode de réglage : Locate the small buttons on the side of the watch case. Typically, one button is for 'Mode' and another for 'Set' or 'Adjust'. Press the 'Mode' button repeatedly until the hour digits begin to flash.
- Ajuster l'heure : Use the 'Set' or 'Adjust' button to change the hour. Pay attention to AM/PM indicators if present.
- Ajuster les minutes : Press the 'Mode' button again to move to the minute digits, then use the 'Set' or 'Adjust' button to set the minutes.
- Définir la date (le cas échéant) : Continue pressing the 'Mode' button to cycle through year, month, and day settings, adjusting each with the 'Set' or 'Adjust' button.
- Quitter le mode de réglage : Once all settings are correct, press the 'Mode' button one last time, or wait a few seconds for the watch to automatically exit setting mode.
Image 3.1: Watch with the pop-up cover open, revealing the digital display for time setting.
4. Mode d'emploi
4.1 Lire l'heure
À view the time, simply lift the pop-up dial cover. The digital LCD display will show the current time.
4.2 Utilisation de la fonction d'éclairage
Your watch is equipped with a light-up function. Locate the dedicated light button, usually on the side of the watch case. Press this button to activate the internal lights, illuminating the display for a few seconds. This feature is useful in dark environments.
4.3 Closing the Pop-Up Dial Cover
Après viewing the time or using the light, gently press the pop-up dial cover back down until it clicks securely into place. This protects the watch face from dust and minor impacts.
5. Entretien
5.1 Nettoyage
To clean your watch, wipe it gently with a soft, slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the plastic case and strap.
5.2 Résistance à l'eau
Important: Cette montre est non résistant à l'eau. Avoid exposing the watch to water, including showering, swimming, or heavy rain, as this can cause damage to the internal components.
5.3 Remplacement de la batterie
The watch uses 4 LR41 (1.5V) product-specific batteries. When the display dims or stops functioning, it's time to replace the batteries. Battery replacement should ideally be performed by a qualified technician to ensure proper sealing and function. If replacing yourself, carefully open the back casing, replace the old batteries with new ones of the same type, and ensure the casing est bien fermé.
Image 5.1 : Arrière view of the watch, indicating the location of the battery compartment.
6. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'écran est vide ou sombre. | Piles faibles ou mortes. | Replace the batteries (4 x LR41 1.5V). |
| L'heure est incorrecte. | Time was not set correctly or reset. | Reportez-vous à la section 3.2 pour réinitialiser la date et l'heure. |
| Light-up feature not working. | Piles faibles ou dysfonctionnement des boutons. | Remplacez les piles. Si le problème persiste, contactez le service client. |
| Pop-up cover does not open/close smoothly. | Débris ou léger désalignement. | Gently clean around the hinge area. Avoid forcing the cover. |
7. Spécifications
- Numéro de modèle : POK4186AZ
- Type d'affichage : LCD numérique
- Mouvement: Quartz
- Matériau du boîtier : Plastique
- Matériau du bracelet : Caoutchouc
- Piles : 4 x LR41 (1.5V) (included)
- Dimensions du colis : 3.11 x 3.07 x 3.03 pouces
- Poids de l'article : 1 once
- Fabricant: Accutime Watch Corp.
- Première date disponible : 12 novembre 2015
8. Garantie et assistance
For warranty information or technical support, please contact Accutime Watch Corp. directly. Retain your proof of purchase for any warranty claims. Contact details can typically be found on the manufacturer's website ou emballage du produit.
Pour plus d'informations sur le produit, vous pouvez consulter le site web. Boutique Accutime sur Amazon.