SONGMICS LJB93W

SONGMICS Adjustable Bar Stool with Armrests (Set of 2)

Model: LJB93W

1. Consignes de sécurité

Veuillez lire et comprendre tous les avertissements de sécurité avant le montage et l'utilisation.

  • Capacité de poids maximale : Do not exceed the recommended weight of 120 kg (264 lbs).
  • Stabilité: Do not use the bar stools on stairs or uneven surfaces where they may tip over. Ensure the base is always on a flat, stable surface.
  • Assemblée: Avant utilisation, assurez-vous que toutes les vis et fixations sont bien serrées. Vérifiez régulièrement et resserrez si nécessaire.
  • Enfants: Keep children away from the product during assembly. Do not allow children to play on or with the bar stools without adult supervision.
  • Ascenseur de gaz: The gas lift cylinder contains pressurized gas. Do not attempt to disassemble or puncture it.

2. Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'assemblage.

  • 2 x Bar Stool Seats with Backrests and Armrests
  • 2 x Accessory Packs (containing screws, washers, and tools)
  • 2 x vérins à gaz
  • 2 repose-pieds
  • 2 x Plaques de base
  • 1 x Manuel d'instructions

3. Instructions de montage

Assembly is required. Follow these steps for quick and easy setup.

  1. Préparez la base : Place the large chrome base plate on a flat, stable surface. Insert the gas lift cylinder into the central hole of the base plate. Ensure the anti-slip plastic ring is correctly positioned on the underside of the base to protect your floor.
  2. Fixer le repose-pieds : Slide the footrest ring over the top of the gas lift cylinder.
  3. Préparer le siège : Carefully remove any protective plastic caps from the top of the gas lift cylinder. This is crucial for the height adjustment mechanism to function correctly.
  4. Raccordez le siège au vérin à gaz : Align the mounting plate under the seat with the top of the gas lift cylinder. Press down firmly to secure the seat onto the gas lift.
  5. Sécurisez votre siège : Using the provided screws and tools from the accessory pack, attach the seat to the gas lift mechanism. Typically, there are 8 screws to secure the padded seat to the metal frame.
Hand removing a white plastic cap from a metal cylinder
Image: Removing Protective Cap
Ensure to remove the protective plastic cap from the gas lift cylinder before assembly to allow proper height adjustment.
Two white bar stools with chrome bases and footrests
Image: Assembled Bar Stools
A view of the two bar stools fully assembled, ready for use.

4. Mode d'emploi

Your SONGMICS bar stools are designed for ease of use and comfort.

4.1 Réglage de la hauteur

Pour régler la hauteur du siège :

  • Pour relever le siège : Lift the adjustment lever located under the seat while standing up. The seat will automatically rise.
  • Pour abaisser le siège : Lift the adjustment lever while seated. The seat will lower under your weight. Release the lever at the desired height.

4.2 Fonction de pivotement à 360°

The seat can freely rotate 360 degrees, allowing for easy movement and interaction without needing to reposition the entire stool.

Diagram showing height adjustment range and 360 degree swivel function of a bar stool
Image: Height Adjustment and Swivel
Illustrates the adjustable height range (62.5 cm to 82.5 cm) and the 360-degree swivel capability.
Close-up of bar stool footrest, anti-slip ring, and height adjustment lever
Image: Footrest and Adjustment Lever
Details of the comfortable footrest, the anti-slip ring on the base, and the lever for height adjustment.

5. Entretien

Un entretien approprié prolongera la durée de vie et préservera l'apparence de vos tabourets de bar.

5.1 Nettoyage

  • Revêtement en similicuir : Nettoyer avec un chiffon doux, damp Pour les taches tenaces, utilisez une solution de savon doux, puis essuyez immédiatement. Évitez les nettoyants abrasifs et les produits chimiques agressifs.
  • Removable Armrest Covers: The armrest covers are removable for easy cleaning. Follow the care instructions on the label if available, or hand wash with mild soap and air dry.
  • Chrome-Plated Steel: Clean with a soft, dry cloth. For smudges or fingerprints, use a chrome cleaner or a damp cloth with a small amount of glass cleaner, then buff dry.
  • Plaque de base : After cleaning, ensure the base plate is thoroughly dried to prevent rust, especially if exposed to moisture.

5.2 Entretien général

  • Regularly check all screws and bolts to ensure they are tight. Re-tighten as needed to maintain stability.
  • Évitez toute exposition prolongée à la lumière directe du soleil ou à des températures extrêmes, qui peuvent endommager le similicuir.
  • Do not use sharp objects on the upholstery to prevent tears or punctures.
Hand cleaning a white faux leather seat with a grey cloth
Image: Cleaning the Seat
Demonstrates wiping the faux leather seat with a cloth for cleaning.
Close-up of white faux leather seat with features like easy care, breathable, durable, and removable armrest covers
Image: PU Surface Features
Highlights the easy-care, breathable, and durable nature of the faux leather surface, along with removable armrest covers.

6. Dépannage

Problèmes courants et leurs solutions.

  • Seat does not adjust height:
    Ensure that the protective plastic cap on the top of the gas lift cylinder has been completely removed during assembly. If it's still present, the gas lift cannot function.
  • Le tabouret semble bancal :
    Check all assembly screws and bolts, especially those connecting the seat to the mechanism and the footrest to the gas lift. Tighten any loose connections. Ensure the base is on a flat, even surface.
  • Gas lift sinks or does not hold height:
    This indicates a potential issue with the gas lift cylinder. If the stool is still under warranty, contact customer support. Otherwise, a replacement gas lift may be required.
  • Scratches on the floor:
    Verify that the anti-slip plastic ring on the underside of the base plate is correctly installed and intact. If damaged, it may need replacement.

7. Spécifications

Numéro de modèleLJB93W
Quantité2 tabourets de bar
CouleurBlanc
MatérielFaux Leather (Seat), Chrome-plated Steel (Frame, Base)
Dimensions du produit (P x L x H)44.5 x 38 x 95-115 cm (17.5 x 15 x 37.4-45.3 pouces)
Plage de hauteur du siège62.5 - 82.5 cm (24.6 - 32.5 pouces)
Diamètre de la base41 cm (16.1 pouces)
Poids de l'article16.4 kg (36.2 lbs) per set
Poids maximum recommandé120 kg (264 lb)
Caractéristiques spécialesHeight Adjustable, 360° Swivel, Armrests, Backrest, Footrest
Schéma présentant les dimensions détaillées du tabouret de bar
Image : Dimensions du produit
Detailed measurements of the bar stool, including height, width, depth, and base diameter.
Comparison of a large 41cm diameter base versus a smaller 38.5cm diameter base
Image: Stable Base Comparison
Illustrates the large 41 cm diameter base for enhanced stability compared to smaller bases.

8. Garantie et assistance

For warranty information or customer support, please refer to the documentation included with your purchase or contact SONGMICS directly through their official website ou le détaillant où le produit a été acheté.

Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.