Fujitsu General AR-RCC2J

Fujitsu General Air Conditioner Remote Control AR-RCC2J User Manual

Model: AR-RCC2J

Introduction

This manual provides detailed instructions for the proper use and maintenance of your Fujitsu General Air Conditioner Remote Control, model AR-RCC2J. Please read this manual thoroughly before using the remote control to ensure optimal performance and longevity.

Installation

Installation de la batterie

The remote control requires two AAA (UM-4) alkaline batteries. Ensure correct polarity when inserting the batteries.

  1. Slide the battery cover on the back of the remote control downwards to open.
  2. Insert two new AAA alkaline batteries, matching the (+) and (-) terminals as indicated inside the battery compartment.
  3. Refermez le couvercle de la batterie en le faisant glisser en place jusqu'à ce qu'il s'enclenche.

Important: Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote control will not be used for an extended period to prevent leakage.

Back of Fujitsu General AR-RCC2J remote control showing battery compartment and instructions.

Figure 1 : Dos de la télécommande avec compartiment à piles.

Mode d'emploi

Familiarize yourself with the buttons on your remote control. The following section describes the function of each button.

Front of Fujitsu General AR-RCC2J remote control showing all buttons and LCD screen.

Figure 2 : Face avant view de la télécommande.

Nom du boutonFonction
運転/停止 (Fonctionnement/Arrêt)Permet d'allumer ou d'éteindre le climatiseur.
運転切換 (Mode de fonctionnement)Cycles through operation modes: Auto, Cooling, Dehumidify, Fan, Heating.
温度 (Temperature) ▲/▼Permet de régler la température souhaitée.
風量切換 (Fan Speed)Adjusts the fan speed: Auto, Strong, Weak, Gentle, Silent.
風向 (Air Direction)Ajuste la direction horizontale du flux d’air.
スイング (Swing)Activates or deactivates the automatic vertical airflow swing.
ハイパワー (High Power)Active un mode de fonctionnement puissant pour un refroidissement ou un chauffage rapide.
電流カット (Current Cut)Engages an energy-saving mode by limiting current consumption.
信号切換 (Signal Switch)Used for switching signals, potentially for controlling multiple units or specific functions.
プラズマイオン (Plasma Ion)Activates the Plasma Ion function for air purification.
内部クリーン (Nettoyage interne)Initiates an internal cleaning cycle for the air conditioner unit.
タイマー (Minuterie)Sets or cancels the ON/OFF timer.
切換 (Switch)Used for navigating or confirming timer settings.
時間変更 (Time Change)Permet de régler la durée de la minuterie.
リセット (Reset)Resets the remote control settings. Typically a recessed button requiring a pointed object.

Entretien

Nettoyage de la télécommande

Essuyez la télécommande avec un chiffon doux et sec. N’utilisez pas de nettoyants liquides ni de produits abrasifs, car ils pourraient endommager la surface ou les composants internes.

Remplacement de la batterie

Replace batteries when the display becomes dim or the remote control becomes unresponsive. Refer to the 'Battery Installation' section for detailed instructions.

Dépannage

  • La télécommande ne répond pas :
    Check if the batteries are inserted correctly with the correct polarity. Replace with new batteries if they are old or depleted. Ensure there are no obstructions between the remote control and the air conditioner unit's receiver.
  • L'écran est sombre ou vide :
    This indicates low battery power. Replace both batteries with new AAA alkaline batteries. After replacing batteries, press the 'Reset' button (if available and accessible) to restore full functionality.
  • Air Conditioner Not Responding to Commands:
    Ensure the remote control is pointed directly at the air conditioner unit. Verify that the air conditioner unit is powered on. If the issue persists, try resetting the remote control by removing and reinserting the batteries, then pressing the 'Reset' button.

Caractéristiques

FonctionnalitéDétail
Numéro de modèleAR-RCC2J
CouleurBlanc
Source d'énergie2 piles alcalines AAA (non incluses)
Dimensions (environ)16.8 x 9 x 3.3 cm
Poids (environ)98 g
Code UPC601209819167

Garantie et assistance

For warranty information or technical support, please refer to the documentation provided with your Fujitsu General air conditioner unit or contact Fujitsu General customer service directly. This remote control is designed as a genuine replacement part.

© 2023 Fujitsu General. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.