Valcom V-CTLA-2

Manuel d'utilisation des haut-parleurs encastrés au plafond Valcom VC-V-CTLA-2 2x2 avec fonction Talkback

Model: V-CTLA-2 | Brand: Valcom

1. Introduction

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Valcom VC-V-CTLA-2 2x2 Talkback Layin Ceiling Speakers. These speakers are designed for integration into standard 2x2 (24x24 inch) suspended ceiling grid systems, offering both audio output and talkback capabilities. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Caractéristiques principales :

  • Easy lay-in mounting for quick installation in standard 2x2 ceiling grids.
  • Integrated volume settings for audio level control.
  • Scuff-resistant perforated grille for durability and aesthetic integration.
  • Durable white acrylic baked enamel finish to match common ceiling aesthetics.
  • Integral backbox with a three-hour burn rating for enhanced safety and compliance.
  • Provides excellent music and voice reproduction.
  • Talkback functionality for two-way communication.

2. Consignes de sécurité

Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou les dommages matériels.

  • Installation professionnelle recommandée : Installation should be performed by qualified personnel familiar with local electrical codes and ceiling grid systems.
  • Coupure de courant : Ensure all power to the installation area is disconnected before beginning any wiring or installation procedures.
  • Câblage approprié : Use appropriate gauge wiring and ensure all connections are secure and insulated to prevent short circuits.
  • Support de poids : Verify that the ceiling grid system can adequately support the weight of the speakers.
  • Conditions environnementales : Do not expose speakers to excessive moisture, extreme temperatures, or corrosive environments. These speakers are not waterproof.
  • Integral Backbox: The integral backbox provides fire resistance; do not modify or remove it.

3. Contenu du colis

À l'ouverture du colis, vérifiez que tous les composants sont présents et non endommagés.

  • Valcom VC-V-CTLA-2 2x2 Talkback Layin Ceiling Speaker (x2)
  • Manuel d'instructions (ce document)

4. Configuration et installation

The Valcom VC-V-CTLA-2 speakers are designed for easy installation into standard 2x2 (24x24 inch) suspended ceiling grid systems.

4.1 Montage du haut-parleur

  1. Prepare the Ceiling Grid: Identify the desired location for the speaker. Ensure the existing ceiling tile can be removed to accommodate the speaker.
  2. Remove Ceiling Tile: Carefully lift and remove the 2x2 ceiling tile from the grid where the speaker will be installed.
  3. Lay-in Speaker: Position the Valcom VC-V-CTLA-2 speaker into the open 2x2 grid space. The speaker is designed to rest directly on the grid rails, similar to a standard ceiling tile. Ensure it is seated securely and flush with adjacent tiles.
Valcom VC-V-CTLA-2 2x2 Talkback Layin Ceiling Speaker

Image 1: Valcom VC-V-CTLA-2 2x2 Talkback Layin Ceiling Speaker. This image shows the speaker's perforated grille and frame, designed to fit into a standard suspended ceiling grid.

4.2 Connexions de câblage

The speaker utilizes coaxial connectivity for both audio and talkback functions.

  1. Câblage d'accès : Locate the wiring terminals on the back of the speaker's integral backbox.
  2. Connectez le câble coaxial : Connect the appropriate coaxial cable from your audio system/amplifier to the speaker's coaxial input. Ensure a secure and proper connection according to your system's wiring diagram.
  3. Connexion électrique : The speaker requires a 5W power source, typically supplied via the coaxial connection from a compatible Valcom system or amplifier. Verify power requirements with your system's documentation.
  4. Connexions de test : Before fully securing the speaker, perform a preliminary test of the audio and talkback functions to ensure correct wiring.

5. Fonctionnement

Once installed and connected, the Valcom VC-V-CTLA-2 speakers are ready for operation.

5.1 Lecture audio

  • Source Activation: Activate the audio source connected to your speaker system.
  • Réglage du volume : The speaker features integrated volume settings. These can typically be adjusted via a control on the speaker itself (often a small rotary knob or switch accessible from the front or side) or through the connected amplifier/system. Adjust to the desired listening level.

5.2 Talkback Functionality

The talkback feature allows for two-way communication through the speaker.

  • Initiating Talkback: Refer to your Valcom communication system's manual for specific instructions on how to initiate a talkback session with the speaker. This usually involves pressing a button or selecting the speaker zone on a master station.
  • Speaking into the Speaker: When talkback is active, the speaker acts as a microphone. Speak clearly towards the speaker grille for effective communication.
  • Écoute: The speaker will also reproduce audio from the other end of the talkback conversation.

6. Entretien

Un entretien régulier garantit la longévité et les performances optimales de vos haut-parleurs.

  • Nettoyage: Use a soft, dry cloth to gently wipe the speaker grille and frame. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the speaker components. Avoid abrasive cleaners.
  • Inspection: Periodically inspect the speaker for any signs of damage, loose connections, or obstructions to the grille.
  • Aucune pièce réparable par l'utilisateur : Do not attempt to open or service the speaker yourself. Refer all servicing to qualified personnel.

7. Dépannage

If you encounter issues with your Valcom VC-V-CTLA-2 speakers, consult the following table before contacting support.

ProblèmeCause possibleSolution
Aucun son du haut-parleur
  • No power to the system/speaker.
  • Câblage électrique desserré ou incorrect.
  • Volume réglé trop bas.
  • Audio source not active.
  • Verify power supply to the amplifier/system and speaker.
  • Check all coaxial cable connections for security and correctness.
  • Adjust the speaker's volume control or the system's volume.
  • Vérifiez que la source audio est en marche et correctement connectée.
Son déformé ou indistinct
  • Le volume est trop élevé.
  • Mauvaise connexion du câble.
  • Ingérence.
  • Haut-parleur endommagé.
  • Réduisez le niveau du volume.
  • Inspect and re-secure all wiring connections.
  • Vérifiez la présence d'appareils électroniques à proximité susceptibles de provoquer des interférences.
  • If distortion persists, the speaker may be damaged and require professional inspection.
Talkback function not working
  • Incorrect system configuration.
  • Wiring issue specific to talkback.
  • Master station not properly initiating talkback.
  • Consult your Valcom communication system manual for talkback setup.
  • Verify coaxial wiring for talkback signal integrity.
  • Ensure the master station is correctly configured and operated for talkback.

8. Spécifications

ModèleV-CTLA-2
MarqueValcom
Type de haut-parleurIn-Ceiling, Talkback
Type de montageLay-in Ceiling Mount (designed for 2x2 / 24x24 inch grid)
Taille du haut-parleur8 pouces
Puissance de sortie maximale du haut-parleur5 watts
Technologie de connectivitéCoaxial
Méthode de contrôleVoice (for talkback), Integrated Volume Control
Source d'énergieCorded Electric (via coaxial connection)
FinitionDurable white acrylic baked enamel
Boîtier arrièreIntegral, with three-hour burn rating
Poids de l'articleApproximately 1 pound (0.45 kg) per speaker
Dimensions du produit (approximatives)Designed for 23.75 x 23.75 inch (60.3 x 60.3 cm) ceiling grid opening
Code UPC799111017280

Remarque: les spécifications peuvent être modifiées sans préavis.

9. Garantie et assistance

Valcom products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Valcom website.

When contacting support, please have your model number (V-CTLA-2) and purchase information readily available.

© 2024 Valcom. Tous droits réservés.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.