Force1 U818A

Force1 U818A WiFi FPV Drone Instruction Manual

Modèle : U818A

1. Introduction

Thank you for choosing the Force1 U818A WiFi FPV Drone. This manual provides essential information for the safe and optimal operation of your new quadcopter. Please read all instructions carefully before use and retain this manual for future reference.

The U818A WiFi FPV Drone is designed for both beginners and experienced pilots, featuring a 2MP HD camera for aerial photography and video, First Person View (FPV) capabilities, Headless Mode for simplified control, Gravity Induction for mobile device piloting, and the ability to perform 360-degree flips.

2. Contenu du colis

Veuillez vous assurer que tous les éléments énumérés ci-dessous sont présents dans votre colis :

  • U818A WiFi FPV Quadcopter
  • Télécommande 2.4 GHz
  • 2 x 350mAh LiPo Batteries
  • Chargeur de batterie USB
  • Carte microSD de 4 Go
  • 4 hélices de rechange
  • Banque d'alimentation
  • Manuel d'utilisation
Force1 U818A Drone and included accessories

Image: Force1 U818A Drone with its remote controller, two batteries, USB charger, spare propellers, and other accessories laid out.

3. Installation et assemblage

3.1 Chargement de la batterie

The drone comes with two 350mAh LiPo batteries. Each battery provides approximately 6-7 minutes of flight time and requires 55-65 minutes for a full charge. Use the included USB dual charger to charge both batteries simultaneously.

  • Connect the LiPo batteries to the dual USB charger.
  • Plug the USB charger into a 5V 2A AC USB charging port for optimal charging speed.
  • The charger lights indicate charging status. Allow batteries to rest 10 minutes before charging or playing.

3.2 Installation de la carte microSD

The drone includes a 4GB Micro-SD card for storing HD video and photos. Insert the Micro-SD card into the designated slot on the drone's camera module. Ensure it clicks into place.

3.3 Configuration de la télécommande

The 2.4Ghz remote controller requires 4 AA batteries (not included). Install the batteries into the controller's battery compartment.

3.4 Installation de la batterie du drone

Carefully insert a charged LiPo battery into the drone's battery compartment and connect the power cable. Ensure a secure connection. Some users find it helpful to use a small piece of electrical tape to secure the battery connection to prevent accidental dislodgement during crashes.

Force1 U818A Drone from top view

Image : Vue de dessus view of the Force1 U818A Drone, showing its quadcopter design with propeller guards.

4. Mode d'emploi

4.1 Appairage du drone et de la télécommande

  1. Allumez la télécommande. Le voyant clignotera.
  2. Connect the battery to the drone. The drone's lights will flash.
  3. Placez le drone sur une surface plane et de niveau.
  4. Push the left joystick (throttle) all the way up, then all the way down. The controller will beep, and the drone's lights will become solid, indicating successful pairing.

4.2 Commandes de vol de base

Familiarize yourself with the remote controller's joysticks and trim buttons for stable flight.

  • Joystick gauche (manette des gaz) : Contrôle l'altitude (montée/descente) et le lacet (rotation gauche/droite).
  • Joystick droit : Controls pitch (forward/backward) and roll (left/right strafing).
  • Boutons de garniture : Adjust the drone's stability if it drifts in any direction.
Force1 U818A Remote Controller

Image: Close-up of the Force1 U818A Remote Controller, showing joysticks, buttons, and the LCD display.

4.3 Fonctionnalités spéciales de vol

  • Mode sans tête : Simplifies flight by orienting the drone's front relative to the pilot, regardless of the drone's actual orientation. Activate via a dedicated button on the controller.
  • Return Home Function: Initiates an automatic return sequence. Consult the manual for specific activation steps.
  • Flips à 360 degrés : Press the dedicated flip button and then move the right joystick in the desired direction to perform aerial acrobatics.
  • Mode d'induction par gravité : Fly the drone using your mobile device by tilting it. Requires the FPV app.

4.4 Camera & Video Operation

The drone's 2MP HD camera captures 1280x720 video at 30 FPS and high-resolution photos.

  • Prendre des photos: Press the photo button on the remote controller.
  • Enregistrement vidéo : Press the video button on the remote controller to start and stop recording.
  • FPV (First-Person View): Connect your mobile device to the drone's WiFi network and use the dedicated FPV app to view vivre footage and control the camera.

4.5 Night Flight

Equipped with LED running lights and a remote control signal light, the U818A is suitable for nighttime flight. The lights can be turned on/off via the controller.

Force1 U818A Drone with LED lights illuminated

Image: Force1 U818A Drone with its blue and red LED lights illuminated, indicating readiness for night flight.

Video: Official product video demonstrating the Force1 U818A Drone's features, including FPV, Headless Mode, 360-degree flips, and LED lights for night flight. The video showcases the drone's sleek and durable design, powerful and accurate control, and real-time FPV capabilities.

5. Entretien

5.1 Propeller Care & Replacement

The drone features 4 safety propeller guards to prevent damage. In case of propeller damage, use the included spare propellers and screwdriver for replacement. Ensure propellers are installed correctly (A and B types) to maintain flight stability.

5.2 Nettoyage général

Regularly clean the drone's body and propellers to remove dust and debris. Use a soft, dry cloth. Avoid using harsh chemicals or excessive moisture.

6. Dépannage

  • Problèmes d'enregistrement vidéo : If the included Micro-SD card causes video corruption or playback issues, consider replacing it with a higher-quality, compatible Micro-SD card (e.g., a SanDisk 8GB card has been noted to resolve such issues).
  • Battery Dislodgement: In the event of a crash, the battery may become dislodged. Reinsert the battery, reconnect the power, and place the drone on a level surface to reset its gyroscope before attempting to fly again. Some users secure the battery with electrical tape to prevent this.
  • Dérives de drones : Use the trim buttons on the remote controller to adjust for any unwanted drifting during flight.
  • Perte de contrôle : Ensure the drone and controller are properly paired. If control is lost, especially at high altitudes, the drone may drift with the wind. Fly in calm conditions and within visual range.

7. Spécifications

MarqueForce1
Nom du modèleU818A
Tranche d'âge (description)Adulte (14+)
CouleurBleu
Résolution de capture vidéo720p (1280*720 at 30 FPS)
Résolution fixe efficace2 MP
Technologie de connectivitéUSB, Wi-Fi
Capacité de la batterie350 millièmeamp Heures
Autonomie de la batterie6 à 7 minutes
Temps de charge55 à 65 minutes
Niveau de compétenceDébutant
MatérielPlastique

8. Consignes de sécurité

  • Utilisez toujours le drone dans des zones dégagées, loin des personnes, des animaux, des bâtiments et des lignes électriques.
  • Évitez de voler par vents forts ou par conditions météorologiques défavorables.
  • Maintenez un contact visuel permanent avec le drone.
  • Avant chaque vol, assurez-vous que toutes les hélices sont bien fixées et non endommagées.
  • Ne volez pas à proximité des aéroports ou des espaces aériens réglementés.
  • Supervise children during drone operation. Recommended for ages 14 and up.
  • Do not attempt to retrieve a drone from high places or water without ensuring safety.

9. Garantie et assistance

For warranty information, technical support, or replacement parts, please refer to the official Force1 webConsultez le site ou contactez directement leur service client. Conservez votre reçu d'achat comme preuve d'achat.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.