1. Produit terminéview
The Permatex 81160 High-Temp Red RTV Silicone Gasket Maker is a specialized sealant designed for heavy-duty applications requiring resistance to extreme temperatures. This product forms reliable gaskets that can withstand intermittent temperatures ranging from -65°F à 650°F (-54°C à 343°C).
It is formulated to create durable, flexible, and waterproof seals for various automotive and industrial repair needs.
Image 1.1: Permatex 81160 High-Temp Red RTV Silicone Gasket tube. This image shows the product packaging, highlighting the brand, product name, and key features.
2. Consignes de sécurité
Always read and understand all safety precautions before using this product. Use personal protective equipment as required.
2.1. Precautionary Statements - Prevention
- Contains: Calcium carbonate, Iron oxide.
- Obtenir des instructions spéciales avant utilisation.
- Ne pas manipuler avant d'avoir lu et compris toutes les précautions de sécurité.
- Utiliser l'équipement de protection individuelle requis.
2.2. Precautionary Statements - Response
- SI DANS LES YEUX: Rincez abondamment à l'eau pendant plusieurs minutes. Retirez vos lentilles de contact si vous en portez et si elles peuvent être facilement retirées. Continuez à rincer. Si l'irritation oculaire persiste, consultez un médecin.
- SI SUR LA PEAU: Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Wash contaminated clothing before reuse.
2.3. Precautionary Statements - Storage
- Protéger du rayonnement solaire.
- Stocker dans un endroit bien ventilé.
- Magasin fermé à clé.
- Tenir hors de portée des enfants.
3. Installation
3.1. Préparation de la surface
For optimal results, ensure that all surfaces where the gasket maker will be applied are propre et sec. Remove any old gasket material, grease, oil, or other contaminants that could interfere with adhesion.
4. Instructions d'application
- Prepare Nozzle: Coupez la buse à la taille de cordon souhaitée.
- Apply Gasket Maker: Apply a continuous bead of silicone, approximately 1/16" to 1/4" (2 to 6mm) thick, to one surface. Ensure the bead surrounds all bolt holes.
- Assembler les pièces : Immediately assemble the parts while the silicone is still wet.
- Serrage initial : Finger tighten the assembly until the material begins to squeeze out around the flange.
Image 4.1 : Example of Permatex 81160 High-Temp Red RTV Silicone Gasket application. This image illustrates the product being applied as a continuous bead on a surface.
5. Curing and Finishing
- Initial Dry Time: Allow the gasket maker to dry for une heure.
- Serrage final : After the initial dry time, tighten the assembly to the manufacturer's specified torque.
- Temps de durcissement complet : Permettre 24 heures for the gasket maker to fully cure before filling with fluids or returning the component to service.
6. Entretien
6.1. Stockage des produits
Après chaque utilisation, replace the cap securely to prevent the product from drying out. Store the tube in a cool, dry, well-ventilated area, away from direct sunlight and out of reach of children.
7. Troubleshooting and Limitations
Remarque importante : Ce produit est NOT recommended for use on head gaskets or on parts that will come into direct contact with gasoline. Using the product in these applications may lead to product failure and potential damage.
8. Spécifications du produit
| Fonctionnalité | Détail |
|---|---|
| Nom du produit | Permatex High-Temp Red RTV Silicone Gasket Maker |
| Numéro de modèle | 81160 |
| Marque | Permatex |
| Matériel | Silicone |
| Couleur | Rouge |
| Temperature Range (Intermittent) | -65°F à 650°F (-54°C à 343°C) |
| Temps de séchage complet | 24 heures |
| Volume de l'article | 3 onces liquides |
| Niveau de résistance à l'eau | Étanche |
| Code UPC | 686226811608 |
9. Informations sur l'élimination
Dispose of contents and container in accordance with local regulations and to an approved waste disposal plant. Do not dispose of in household waste.
10. Contact et assistance
For further assistance or inquiries, please contact Permatex:
- Fabricant: Permatex Chemicals, a division of ITW
- Adresse: Solon, OH 44139, USA
- Numéro sans frais : 866-732-9502
- Website: www.permatex.com
Permatex and its design are trademarks of Illinois Tool Works Inc. The product is assembled in the U.S.A. with U.S. and global materials.
11. Informations sur la garantie
Specific warranty details for Permatex products are typically available on the manufacturer's official website or by contacting their customer support directly. Please refer to www.permatex.com ou appelez 866-732-9502 pour obtenir les informations les plus récentes sur la garantie.