Simplex 3002-26D-41 Narrow Stile Mechanical Push-Button Lock User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Simplex 3002-26D-41 Narrow Stile Mechanical Push-Button Lock. This robust, keyless entry system is designed for narrow stile doors, offering reliable security without the need for batteries or wiring. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lock.

Consignes de sécurité

• Portez toujours un équipement de sécurité approprié, tel qu'une protection oculaire, lors de l'installation.
• Veillez à ce que tous les composants soient solidement fixés afin d'éviter tout délogement accidentel.
• N’essayez pas de modifier le mécanisme de verrouillage, car cela pourrait compromettre la sécurité et annuler la garantie.
• Gardez les petites pièces hors de portée des enfants.
• If you are unsure about any installation step, consult a qualified locksmith or professional installer.

Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• Exterior Lock Assembly (with push-buttons)
• Interior Lock Assembly (with thumbturn)
• Latch/Deadbolt Mechanism
• Plaque de gâche et boîte à poussière
• Vis et fixations de montage
• Modèle d'installation
• Instructions d'utilisation et de programmation
• Key(s) for Override Function (if applicable)

Configuration et installation

Proper installation is crucial for the optimal performance of your Simplex lock. Follow these general steps. Refer to the included installation template for precise drilling instructions.

An image showing the Simplex 3002-26D-41 Narrow Stile Lock, featuring its satin chrome finish and integrated thumbturn for interior egress.

1. Préparation de la porte

1. Mesurer les dimensions de la porte : Ensure your door and frame are compatible with a narrow stile lock.
2. Appliquer le modèle : Secure the provided installation template to the door edge and face.
3. Trous de forage : Carefully drill all necessary holes for the lock body, latch, and fasteners as indicated by the template.

2. Latch Installation

1. Insérer le loquet : Slide the latch mechanism into the prepared hole on the door edge.
2. Verrou de sécurité : Fasten the latch with the provided screws, ensuring it is flush with the door edge.

3. Lock Assembly Installation

1. Installer l'assemblage extérieur : Position the exterior lock assembly (with push-buttons) onto the door, aligning the spindle with the latch mechanism.
2. Installer l'assemblage intérieur : Place the interior lock assembly (with thumbturn) onto the door, ensuring proper alignment with the exterior assembly and spindle.
3. Assemblages sécurisés : Use the through-bolts and screws to firmly attach both assemblies to the door. Do not overtighten.

4. Strike Plate Installation

1. Align Strike Plate: Close the door and mark the position of the latch bolt on the door frame.
2. Installer la gâche : Mortise the frame as needed and install the strike plate and dust box, ensuring the latch bolt engages smoothly.

5. Essai de fonctionnement

1. Test Latch: Ensure the latch retracts and extends smoothly.
2. Test Thumbturn: Verify the thumbturn operates freely from the inside.
3. Test Code Entry: Before closing the door, test the factory default code or your newly set code to ensure the mechanism engages.

Mode d'emploi

Setting/Changing the Combination

The Simplex 3002-26D-41 lock uses a mechanical combination. To set or change the combination, you typically need to remove the interior cover plate and manipulate the code tumblers according to the detailed instructions provided with your lock's programming guide. This process usually involves:

1. Removing the interior cover.
2. Locating the code change mechanism (e.g., tumblers or pins).
3. Following the specific sequence to set your desired code.
4. Testing the new code before reassembling the lock.

Important: Always record your new combination in a secure location. Do not share your combination with unauthorized individuals.

Unlocking from the Exterior (Code Entry)

1. Saisissez le code : Press the buttons corresponding to your combination in the correct sequence.
2. Turn Handle/Lever: After entering the correct code, turn the exterior handle or lever to retract the latch bolt.
3. Porte ouverte : The door will now open.
4. Verrouiller : The lock automatically relocks when the door is closed and the handle/lever returns to its original position.

Unlocking from the Interior (Thumbturn)

From the interior side, simply rotate the thumbturn to retract the latch bolt and open the door. This provides immediate egress without needing to enter a code.

Key Override Function

If your model includes a key override, insert the key into the cylinder and turn it to retract the latch bolt. This function is typically used for emergency access or by authorized personnel for management purposes.

Entretien

Nettoyage

• Nettoyez l'extérieur de la serrure avec un chiffon doux et sec.amp tissu.
• Évitez d'utiliser des nettoyants abrasifs, des solvants ou des produits chimiques agressifs, car ils peuvent endommager la finition.

Lubrification

• Periodically apply a small amount of graphite-based lubricant or a silicone spray to the latch bolt and internal moving parts.
• Do not use oil-based lubricants, as they can attract dust and debris, leading to mechanism issues.

Dépannage

Caractéristiques

• Marque: Simplex
• Numéro de modèle : 3002-26D-41
• Type de serrure : Mechanical Push-Button Lock with Key Override (if applicable)
• Matériel: Chrome
• Finition: Chrome satiné
• Utilisations recommandées : Door Lock for Homes, Offices, and Buildings
• Composants inclus : Tour de pouce
• Poids de l'article : 2.7 livres
• GTIN/UPC : 085194241866

Garantie et assistance

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Simplex webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.