1. Introduction
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.
2. Consignes de sécurité
Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.
- Ensure the motorcycle is stable and on a level surface before starting installation.
- Portez un équipement de protection individuelle approprié, tel que des gants et des lunettes de protection.
- Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
- Regularly inspect the windscreen and mounting hardware for any signs of wear, damage, or looseness.
- If you are unsure about any step of the installation process, consult a qualified motorcycle mechanic.
3. Contenu du colis
Avant de procéder à l'installation, vérifiez que tous les composants sont présents et en bon état. Si des pièces sont manquantes ou endommagées, contactez votre revendeur.
- 1x Puig 6789W Traffic Windscreen (Transparent)
- 1x Kit de matériel de montage (supports, boulons, rondelles, écrous)
- 1x Manuel d'instructions (ce document)
Figure 1: The Puig 6789W Traffic Windscreen and its components.
4. Configuration et installation
This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).
4.1. Outils requis
- Jeu de clés hexagonales
- Jeu de clés
- Tournevis (Phillips ou plat, selon les besoins)
- Chiffon doux pour le nettoyage
4.2. Étapes d'installation
- Préparer la moto : Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
- Identifier les points de fixation : Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
- Assembler les supports : Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
- Fixation à la moto : Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
- Ajuster la position : Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
- Serrage final : Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.
5. Fonctionnement
Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.
6. Entretien
Proper maintenance will extend the life and clarity of your windscreen.
- Nettoyage: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
- Inspection: Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
- Stockage: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.
7. Dépannage
Cette section aborde les problèmes courants que vous pourriez rencontrer.
| Problème | Cause possible | Solution |
|---|---|---|
| Windscreen vibrates excessively | Boulons de fixation desserrés ; installation incorrecte. | Check and tighten all mounting bolts. Re-evaluate installation steps. |
| Visibilité réduite à travers le pare-brise | Dirt, scratches, or improper cleaning. | Clean the windscreen with mild soap and water. Avoid abrasive materials. If scratched, consider replacement. |
| Windscreen feels loose after riding | Les fixations se sont desserrées à cause des vibrations. | Regularly inspect and tighten all mounting hardware. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 6789 W |
| Marque | Puig |
| Compatibilité | Honda Wave (2012-2013) |
| Couleur | Transparent / Klar |
| Matériel | Plastique |
| Type d'installation | Vehicle-specific fit, Self-adhesive |
| Dimensions du colis | 36 x 31 x 16 cm |
| Poids de l'article | 500 grammes |
9. Garantie et assistance
Les produits Puig sont fabriqués selon des normes élevées. Pour toute information concernant la garantie, les réclamations ou l'assistance technique, veuillez consulter le site officiel de Puig. website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.
Fabricant: Puig
Website: puig.tv