Jebao JGP25000 6000GPH Water Pond Pump Instruction Manual

Informations importantes sur la sécurité

Please observe the following safety precautions to prevent injury or damage to the pump.

AVERTISSEMENT : Risque de choc électrique

• Connect the pump only to a properly grounded, grounding-type receptacle.
• Install the pump only on a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI).
• This pump has not been investigated for use in swimming pools or marine areas. Do not use in these environments.

PRUDENCE:

• This pump is designed for use with water only.
• DO NOT RUN DRY: Operating the pump without water can cause severe damage and void the warranty.
• Ensure water temperature does not exceed 96°F (35.5°C).

Produit terminéview

The Jebao JGP25000 is a high-performance water feature pump engineered for reliability and ease of use. It features a robust design suitable for continuous operation in various water garden applications.

Caractéristiques principales :

• Fonctionnement polyvalent : Designed for both submersible and in-line use.
• Installation flexible : Capable of vertical or horizontal operation, ideal for skimmers.
• Composants durables : Features wear-resistant ceramic bearings and shaft for extended life.
• Large Pre-filter: Reduces the frequency of cleaning by handling solids up to 3/4" diameter.
• Protection contre les surcharges thermiques : Enhances safety and pump longevity.
• Entretien facile : Quick and tool-free disassembly for cleaning.
• Long cordon d'alimentation : Equipped with a 33 ft. power cord for flexible placement.

Instructions d'installation

1. Déballage et inspection

• Retirez délicatement la pompe de son emballage.
• Inspect the pump for any signs of damage during transit. Do not use if damaged.
• Assurez-vous que tous les composants sont présents.

2. Options de placement

The JGP25000 pump offers flexible installation:

• Submersible Installation: Place the pump directly into the pond or water feature. Ensure it is fully submerged and rests on a stable, level surface.
• Installation en ligne : The pump can be installed outside the water feature, connected via appropriate plumbing.
• Orientation: The pump can be positioned vertically or horizontally, accommodating various setups, including skimmers.

3. Connecting Plumbing

• Attach appropriate tubing or piping to the pump's outlet. Ensure all connections are secure and watertight to prevent leaks.
• Utilisez le tuyau clamps or thread sealant as necessary for a tight seal.

4. Connexion électrique

• Before connecting to power, ensure the pump is correctly installed and submerged (if applicable).
• Plug the 33 ft. power cord into a properly grounded, GFCI-protected electrical outlet.
• Avoid using extension cords if possible. If an extension cord is necessary, ensure it is rated for outdoor use and capable of handling the pump's wattaget (520 watts).

Mode d'emploi

1. Démarrage initial

• Ensure the pump is fully submerged in water or primed if used in an in-line setup. Ne faites jamais fonctionner la pompe à sec.
• Connect the pump to the power supply. The pump should start immediately.
• Check for proper water flow and any unusual noises.

2. Fonctionnement continu

The Jebao JGP25000 is designed for continuous operation. Monitor water levels regularly to ensure the pump remains submerged and to prevent dry running.

3. Arrêt

• To turn off the pump, simply disconnect it from the power supply.
• For extended periods of non-use, especially during freezing temperatures, remove the pump from the water, clean it, and store it in a dry, frost-free location.

Entretien

Regular maintenance ensures optimal performance and extends the life of your pump. The JGP25000 is designed for easy, tool-free disassembly for cleaning.

1. Nettoyage du préfiltre

• Disconnect the pump from the power supply before performing any maintenance.
• Remove the pump from the water or its in-line setup.
• Disassemble the pre-filter housing (typically by unlatching or unscrewing components by hand).
• Rinse the pre-filter and impeller chamber thoroughly with clean water to remove debris, algae, and sediment.
• Inspect the impeller for any blockages or damage.
• Reassemble the pump, ensuring all parts are securely fitted.

2. Hivernage

• Before freezing temperatures arrive, remove the pump from the water.
• Nettoyez soigneusement la pompe comme décrit ci-dessus.
• Store the pump in a dry, frost-free location to prevent damage from ice expansion.

Dépannage

If troubleshooting steps do not resolve the issue, please contact Jebao customer support.

Spécifications techniques

Garantie et assistance

Garantie du fabricant

The Jebao JGP25000 Water Pond Pump is backed by a Garantie constructeur d'un an À compter de la date d'achat. Cette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.

The warranty does not cover damage caused by misuse, improper installation, running the pump dry, freezing, or unauthorized modifications.

Assistance clientèle

For technical assistance, warranty inquiries, or replacement parts, please contact Jebao customer support:

• E-mail: info@jebao.com
• Website: www.jebao.com