Breitling Bentley Flying B Automatic Watch Instruction Manual

Introduction

This manual provides essential instructions for the proper use, care, and maintenance of your Breitling Bentley Flying B Automatic Watch, model A2836212/H522/982A. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

Figure 1 : Face avant view of the Breitling Bentley Flying B Automatic Watch. This image displays the silver dial with skeletal hands, the date display at the 12 o'clock position, and the 'Breitling for Bentley' inscription. The watch features a silver-tone stainless steel case and band, with a small seconds sub-dial at the 6 o'clock position.

Produit terminéview

The Breitling Bentley Flying B is a sophisticated automatic timepiece featuring a distinctive rectangular stainless steel case and a silver dial. Key features include:

• Mouvement: Automatique
• Matériau du boîtier : Acier inoxydable argenté
• Matériau du bracelet : Silver-tone Stainless Steel (Speed)
• Cristal: Saphir résistant aux rayures
• Résistance à l'eau : 100 mètres (330 pieds)
• Type de fermoir : Boucle déployante
• Couronne: Verrouillage par vis
• Cadran: Silver, enhanced by skeletal hands, with a date display and a small seconds sub-dial.

Installation et mise en service initiale

Déballage et inspection

Upon receiving your watch, carefully remove it from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the crystal, case, and band.

Remonter la montre

This watch features an automatic movement. While it winds itself with wrist movement, it is recommended to manually wind it upon initial setup or if it has stopped due to inactivity.

1. Unscrew the crown (if applicable) by turning it counter-clockwise until it releases from the case.
2. Gently turn the crown clockwise approximately 30-40 times. This will build up a power reserve.
3. Repoussez la couronne et vissez-la dans le sens des aiguilles d'une montre pour garantir l'étanchéité.

Réglage de l'heure et de la date

1. Unscrew the crown (if applicable) and pull it out to the first position to set the date. Turn the crown to adjust the date.
2. Pull the crown out to the second position to set the time. Turn the crown to move the hands clockwise until the correct time is displayed. Ensure to account for AM/PM when setting the date.
3. Once the time and date are set, push the crown back in and screw it down clockwise firmly to maintain water resistance.

Utilisation de la montre

Mouvement automatique

Your watch is powered by an automatic mechanical movement. It is wound by the natural motion of your wrist. When worn daily, it should maintain its power reserve. If the watch is not worn for an extended period, it may stop and require manual winding as described in the "Setup" section.

Résistance à l'eau

The watch is water resistant to 100 meters (330 feet). This rating makes it suitable for swimming and snorkeling. However, it is pas suitable for scuba diving. Always ensure the crown is fully screwed down before exposing the watch to water.

• Avoid operating the crown or pushers (if any) while the watch is wet or submerged.
• Après exposition à l'eau salée, rincez la montre à l'eau douce et séchez-la soigneusement avec un chiffon doux.

Entretien et soins

Nettoyage

Regularly clean your watch with a soft, dry cloth. For the stainless steel case and band, a slightly damp Un chiffon peut être utilisé, suivi d'un séchage immédiat. Évitez d'utiliser des produits chimiques agressifs ou des matériaux abrasifs.

Stockage

When not wearing your watch, store it in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, consider a watch winder to keep the automatic movement running.

Service

For optimal performance and to maintain its water resistance, it is recommended to have your Breitling watch serviced by an authorized service center every 3-5 years. This includes checking the movement, replacing gaskets, and pressure testing.

Dépannage

• La montre s'est arrêtée : If the watch has not been worn for a while, manually wind it by turning the crown clockwise 30-40 times. Ensure the crown is fully pushed in and screwed down.
• La date ne change pas correctement : Ensure the time is set correctly, passing 12 AM for the date to advance. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
• Condensation sous cristal : Cela indique un risque potentiel de fuite d'eau. Veuillez apporter immédiatement la montre à un centre de service agréé afin d'éviter tout dommage supplémentaire.
• Mesure du temps imprécise : Mechanical watches can vary slightly in accuracy. If the deviation is significant (e.g., more than +/- 15-20 seconds per day), the watch may require regulation by an authorized service center.

Caractéristiques

Garantie et assistance

Breitling watches are covered by a manufacturer's warranty. Please refer to the official Breitling warranty card included with your purchase for specific terms and conditions, including warranty duration and coverage details. For service or support, please contact an authorized Breitling dealer or service center.

You can find more information and locate authorized service centers on the official Breitling website.