RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Produit terminéview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Caractéristiques principales :

• Pouvoir: 39-watt LED
• Température de couleur: Blanc froid 5100K
• Durée de vie: 100,000 hours based on LM-80 tests
• LED: Three multi-chip 13-watt high-performance LEDs
• Optique: NEMA type 7H x 6V with Air-flow technology heatsink
• Réflecteur: Semi-specular anodized aluminum
• Joints: Silicone haute température
• Finition: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Consignes de sécurité

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Sécurité électrique : L'installation doit être effectuée par un électricien qualifié, conformément aux normes électriques nationales et locales en vigueur. Assurez-vous que le courant est coupé au niveau du disjoncteur avant toute installation ou intervention.
• Mise à la terre : The fixture must be properly grounded to prevent potential electric shock.
• Montage: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Température de fonctionnement : N’utilisez pas l’appareil en dehors de sa plage de température spécifiée.
• LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Installation

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Outils requis :

• Tournevis (Phillips et plat)
• Pinces à dénuder
• Pinces
• Drill (if mounting surface requires pilot holes)
• Clé à molette

Options de montage :

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Figure 2 : Example of a Slipfitter Mount (optional accessory)

Étapes d'installation :

1. Débrancher l'alimentation : Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage testeur.
2. Préparez la surface de montage : Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Connexions filaires :
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Utilisez des connecteurs de câbles appropriés et assurez-vous que toutes les connexions sont bien fixées.
4. Montage du support : Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Ajuster la visée : Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Restaurer l'alimentation : Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Fonctionnement

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Fonctionnement standard :

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Figure 3 : Example of a Photocell (optional accessory)

5. Entretien

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Nettoyage:

• Extérieur: Nettoyez périodiquement l'extérieur du luminaire avec un chiffon doux et sec.amp Utilisez un chiffon pour enlever la saleté, la poussière et les débris. N’utilisez pas de nettoyants abrasifs ni de solvants.
• Lentille: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Inspection:

• Inspectez périodiquement le dispositif afin de déceler tout signe de dommage, de connexion desserrée ou d'usure.
• Assurez-vous que tous les éléments de fixation restent bien serrés et sécurisés.
• En cas de dommages, coupez l'alimentation et contactez un électricien qualifié pour réparation ou remplacement.

6. Dépannage

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Spécifications

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garantie et assistance

Garantie du fabricant :

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Garantie constructeur d'un an À compter de la date d'achat, cette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation et d'entretien.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Assistance clientèle :

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webConsultez le site pour obtenir les coordonnées actuelles.