Introduction
The COMAP Trombe AR 2001 is a hydropneumatic toilet flush mechanism designed for efficient and reliable operation in WCs and toilets. This mechanism utilizes compressed air from the water network to provide a powerful flush. It includes a stopcock and a non-return valve for optimal performance and safety.
Key benefits of the Trombe AR 2001 include:
- Conception peu encombrante : Installs effectively in confined spaces.
- Installation flexible : Allows for the toilet seat to be installed flush against the wall.
- Tampà l'épreuve des erroristes : The mechanism is designed without external access, enhancing durability and security.
- Water saving: Engineered for water efficiency with each flush.
- Chasse puissante : Delivers a strong flush due to its pressure-based system.
Configuration et installation
The Trombe AR 2001 is designed for straightforward installation, even in compact areas. Ensure that the installation environment meets the following requirements:
- Pression de service : The water network pressure must be between 3 and 6 bar.
- Capacité: The mechanism is designed for a capacity of 11.5 to 12 liters.
The compact design allows for flexible placement, including installations where the toilet seat can be positioned directly against the wall, optimizing space utilization in bathrooms or WCs.
Mode d'emploi
The Trombe AR 2001 operates using a hydropneumatic system. When the flush handle is activated, compressed air from the water supply, located in the upper part of the mechanism, forces water into the toilet bowl, initiating the flush.
- Initiating a Flush: To flush, firmly press and hold the flush handle.
- Measured Flow Mechanism: The mechanism features a "measured flow" system. The water flow will stop automatically as soon as the flush handle is released. This allows for partial flushes and water conservation.
- Réglage du débit : The flush flow rate can be adjusted to suit the specific water network pressure and the model of the toilet bowl. Refer to the installation guide or consult a professional for detailed adjustment procedures.
Entretien
Regular maintenance ensures the longevity and optimal performance of your Trombe AR 2001 flush mechanism. Due to its tamper-proof design, internal access is limited, making professional servicing advisable for complex issues.
- Nettoyage: Periodically clean external components with a mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the finish or internal seals.
- Détection de fuite : Monitor for any continuous water flow into the toilet bowl, which may indicate a seal issue.
- Kits de réparation : COMAP offers specific repair kits for the Trombe AR 2001. If components like the handle spring require replacement, consider using official parts.
- Trombe AR 2001 Repair Kit: S605000
- Trombe AR 2000 to 2001 Conversion Kit: P072101
Dépannage
This section addresses common issues you might encounter with your Trombe AR 2001 mechanism.
| Problème | Cause possible | Solution |
|---|---|---|
| Continuous water flow into the bowl (leak) | Worn seal, debris in the mechanism, or faulty valve. | Inspect for debris. If the issue persists, a seal replacement or professional inspection may be required. Consider using the Trombe AR 2001 Repair Kit (S605000). |
| Chasse d'eau faible ou incomplète | Low water pressure, incorrect flow adjustment, or obstruction. | Verify water pressure is within 3-6 bar. Check if the flow adjustment needs recalibration. Ensure no obstructions are present. |
| Flush handle not returning to original position | Damaged or worn handle spring. | The handle spring may need replacement. Contact COMAP support or a qualified technician for assistance and genuine replacement parts. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 2982001 |
| Marque | Comap |
| Nom du type de produit | Trombe AR 2001 with stopcock and non-return valve - Hydropneumatic toilet flush mechanism for WC / Toilets |
| Dimensions du produit (L x l x H) | 60 x 20 x 19 cm (23.6 x 7.9 x 7.5 pouces) |
| Poids | 5.46 kilogramme (12.04 lb) |
| Matériel | Laiton |
| Couleur | Neutre |
| Pression de service | 3 à 6 bar |
| Capacité | 11.5 à 12 litres |
| Composants inclus | 1 Trombe AR 2001, with stopcock |
| Numéro de pièce | TRV_064005B |
| Numéro international d'article | 03430650127746 |
Garantie et assistance
For warranty information, technical support, or to purchase replacement parts, please contact COMAP directly or your authorized retailer. Ensure you have your product model number (2982001) and purchase details available when seeking support.
Official repair and conversion kits are available:
- Trombe AR 2001 Repair Kit: S605000
- Trombe AR 2000 to 2001 Conversion Kit: P072101
Always use genuine COMAP parts for repairs to ensure compatibility and maintain product performance.