Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM HCI-TC 70W/830 WDL G8.5 Metal Halide LampVeuillez lire attentivement ces instructions avant utilisation et les conserver pour référence ultérieure.
The OSRAM HCI-TC 70W/830 WDL G8.5 is a high-performance metal halide lamp featuring POWERBALL ceramic technology and UV filter technology, designed for outdoor use. It provides a warm white light (830 WDL) with a high color rendering index, making it suitable for various lighting applications.
Informations importantes sur la sécurité
- Risque de choc électrique : Installation and maintenance should only be performed by a qualified electrician. Ensure power is disconnected before handling the lamp.
- Risque de brûlures : Lamps operate at high temperatures. Allow the lamp laisser refroidir complètement avant manipulation.
- Rayonnement UV : Ce lamp features UV filter technology, but prolonged direct exposure to light from any high-intensity discharge lamp devrait être évité.
- Lamp Rupture: Exploiter lamps only in suitable enclosed luminaires to contain hot particles in case of lamp rupture.
- Compatibilité du ballast : Use only with appropriate electronic or magnetic ballasts designed for metal halide lamps of this wattage and type. Incompatible ballasts can lead to lamp failure or safety hazards.
- Élimination: Disposer de lampconformément à la réglementation locale, car ils peuvent contenir du mercure.
Configuration et installation
Vérifications avant l'installation
- Verify that the luminaire and ballast are compatible with a 70W G8.5 metal halide lamp.
- Ensure the power supply is disconnected at the circuit breaker before beginning installation.
- Inspectez le lamp for any visible damage. Do not install a damaged lamp.
Étapes d'installation
- Ensure the luminaire is clean and free from debris.
- Carefully insert the G8.5 base of the lamp dans le lamp holder. Ensure it is seated firmly and correctly. Do not force the lamp.
- Close the luminaire cover securely.
- Rétablissez l'alimentation du circuit.
Image: The OSRAM HCI-TC 70W/830 WDL G8.5 metal halide lamp, showing its compact design and G8.5 base. This lamp is designed for high-intensity discharge lighting applications.
Note: Manipulez toujours le lamp by its base to avoid touching the glass envelope, as oils from skin can reduce lamp vie.
Mode d'emploi
- Allumage initial : Upon first ignition or after a power interruption, the lamp will require a short warm-up period to reach full brightness and stable color.
- Temps de préchauffage : Le lamp typically reaches full light output within 2-5 minutes after ignition.
- Délai de réattaque : Si le lamp is switched off, it requires a cooling period before it can be re-ignited. This re-strike time is typically 5-15 minutes, depending on ambient temperature and ballast type. Attempting to re-ignite too soon can damage the lamp ou du ballast.
- Poste de travail : Le lamp is designed for operation in any position (h90), but refer to your luminaire's instructions for specific requirements.
Entretien
Nettoyage
Assurez-vous que le lamp is cool and power is disconnected before cleaning. Gently wipe the outer glass envelope with a clean, dry, lint-free cloth. Do not use abrasive cleaners or liquids that could leave residues or damage the lamp.
Lamp Remplacement
Remplacer le lamp when it reaches the end of its rated average lifespan or if it exhibits signs of failure (e.g., flickering, reduced light output, failure to ignite). Always replace with an OSRAM HCI-TC 70W/830 WDL G8.5 lamp or an equivalent approved by OSRAM.
- Coupez l’alimentation du luminaire.
- Autoriser le lamp refroidir complètement.
- Open the luminaire and carefully remove the old lamp by gently pulling it straight out from the G8.5 socket.
- Installez le nouveau lamp as described in the "Installation Steps" section.
Élimination
Halogénures métalliques lamps contain small amounts of mercury and other materials that require special disposal. Do not dispose of lamps in general household waste. Contact your local waste management authority for proper recycling or disposal instructions.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Lamp ne s'enflamme pas. | No power supply; incorrect wiring; faulty lamp; faulty ballast; lamp not seated correctly. | Check power supply and circuit breaker. Verify wiring. Re-seat lamp. Tester avec un l de référence dont le bon fonctionnement est connuamp or ballast (if safe to do so). Consult a qualified electrician. |
| Lamp clignote ou s'allume/s'éteint par cycles. | Fin de lamp life; incorrect ballast; unstable power supply; overheating luminaire. | Remplacer lamp. Ensure ballast is compatible. Check power supply stability. Ensure proper ventilation for the luminaire. |
| Flux lumineux réduit. | Fin de lamp life; dirty lamp or luminaire reflector; incorrect ballast. | Remplacer lamp. Clean lamp and luminaire. Verify ballast compatibility. |
| Lamp takes too long to re-ignite. | Insufficient cooling time; faulty ignitor/ballast. | Allow adequate cooling time (5-15 minutes). Consult a qualified electrician to check ignitor/ballast. |
Caractéristiques
| Marque | OSRAM |
| Numéro de modèle | HCI-TC 70W/830 WDL G8.5 (Internal: 4008321681799, 999017835046) |
| Type de lumière | Halogénure métallique |
| Quoitage | 70 watts |
| Voltage | 96 volts |
| Couleur claire | Warm White (830 WDL) |
| Indice de rendu des couleurs (IRC) | 89 |
| Utilisation intérieure/extérieure | De plein air |
| Type de matériau | Céramique, métal |
| Type de base | G8.5 |
| Durée de vie moyenne | 15,000 hours (with electronic ballast); 12,000 hours (with magnetic ballast) |
| Poids de l'article | 9 gramme |
Informations sur la garantie
OSRAM products are manufactured to high quality standards. For specific warranty terms and conditions applicable to your region and product, please refer to the official OSRAM website or contact OSRAM customer service. Keep your proof of purchase for warranty claims.
Assistance clientèle
If you have any questions, require technical assistance, or need further support regarding your OSRAM HCI-TC 70W/830 WDL G8.5 Metal Halide Lamp, please visit the official OSRAM website or contact their customer service department. Contact information can typically be found on the OSRAM website ou emballage du produit.
OSRAM Official Website: www.osram.com