Éclairage Progress P4489-09

Progress Lighting Joy Collection 3-Light Chandelier P4489-09 Instruction Manual

Marque: Progress Lighting | Modèle: P4489-09

Introduction

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting Joy Collection 3-Light Chandelier, model P4489-09. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety. This chandelier features a brushed nickel finish with arcing metal arms and etched white fluted glass shades, designed for indoor use.

Caractéristiques principales

  • Brushed Nickel finish for a modern aesthetic.
  • Graceful arcing forms of metal arms and linear elements.
  • Etched white fluted glass shades for diffused light.
  • Conçu pour une utilisation en intérieur.
  • Unique stem-hung construction, suitable for sloped ceilings.

Consignes de sécurité

AVERTISSEMENT: Risque d'électrocution. Coupez l'alimentation au niveau du tableau électrique ou du disjoncteur avant toute installation ou intervention. En cas de doute sur la procédure d'installation, consultez un électricien qualifié.

  • Always turn off the main power supply before installing or performing any maintenance on the fixture.
  • Assurez-vous que tous les raccordements électriques sont effectués conformément aux codes, ordonnances et au Code national de l'électricité (NEC).
  • Utilisez uniquement le type d'ampoule et l'eau spécifiés.tage pour éviter la surchauffe et les risques d'incendie potentiels.
  • N’installez pas ce luminaire dans un endroit humide ou sec.amp Il est conçu pour un usage intérieur uniquement.
  • Manipulez les composants en verre avec précaution pour éviter les bris.
  • Tenez les matériaux inflammables éloignés du luminaire.

Contenu du colis

Avant de commencer l'installation, vérifiez que tous les composants énumérés ci-dessous sont présents. Si des pièces sont manquantes ou endommagées, n'essayez pas d'assembler ou d'installer le produit. Contactez le service client pour obtenir de l'aide.

  • Assemblage de la structure du lustre
  • Etched White Fluted Glass Shades (3)
  • Mounting Hardware (including canopy, mounting strap, screws)
  • Chain (72 inches)
  • Stems (Two 6-inch stems)
  • Fiche d'installation
Diagram showing two 6-inch stems and a 72-inch chain for adjustable hanging height.

Figure 1: Included stems and chain for adjustable hanging.

Caractéristiques

FonctionnalitéDétail
MarqueÉclairage progressif
Numéro de modèleP4489-09
CouleurNickel brossé
MatérielAcier allié, verre
Formulaire de luminaireLustre
Nombre de sources lumineuses3
Type de source lumineuseIncandescent (Bulbs not included)
Max Vattage100 watts par ampoule
Culot de l'ampouleE26 moyen
Voltage120 volts
Utilisation intérieure/extérieureIntérieur
Dimensions de l'article (L x l x H)20"L x 20"l x 16.38"H
Poids de l'article6 livres
Assemblage requisOui
Diagram showing the dimensions of the chandelier: 20 inches wide and 16-3/8 inches high.

Figure 2: Chandelier dimensions.

Configuration et installation

Installation of this chandelier requires basic electrical knowledge. It is recommended to have a qualified electrician perform the installation. Refer to the included "Installation Sheet" for detailed, step-by-step instructions specific to this model.

Directives générales d'installation :

  1. Préparez la zone : Ensure the power is turned off at the circuit breaker. Clear the installation area and gather all necessary tools.
  2. Support de montage: Secure the mounting strap to the electrical junction box in the ceiling.
  3. Ajustez la hauteur de suspension : The fixture includes a 72-inch chain and two 6-inch stems. Determine the desired hanging height. For dining areas, the bottom of the chandelier should typically be 30-34 inches above the table. For general living spaces, ensure at least 7 feet of clearance from the floor to the bottom of the fixture. For sloped ceilings, the chain allows the fixture to hang straight and level.
  4. Câblage : Connect the fixture's wires to the household electrical wires according to the provided wiring diagram in the installation sheet. Ensure all connections are secure with wire nuts.
  5. Fixation sécurisée : Attach the chandelier canopy to the mounting strap, securing it in place.
  6. Install Shades and Bulbs: Carefully attach the etched white fluted glass shades. Install three E26 medium base incandescent bulbs (up to 100 watts each, not included).
Diagram showing a chandelier hanging above a dining table, with recommended height of 30-34 inches above the table and a width of 32-48 inches, or table width minus 12 inches.

Figure 3: Chandelier hanging height guidelines for dining tables.

Diagram showing three pendant lights hanging above a kitchen island, with recommended spacing and height of 30-36 inches above the island.

Figure 4: Chandelier hanging height guidelines for kitchen islands.

Diagram showing a chandelier hanging in a staircase, with recommended height relative to ceiling and floor levels.

Figure 5: Chandelier hanging height guidelines for staircases.

Mode d'emploi

Once installed, restore power to the circuit. The chandelier is operated via a standard wall switch (not included). Ensure the correct type and wattage of bulbs are used for optimal performance and safety.

Entretien

  • Nettoyage: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
  • Remplacement de l'ampoule : Always turn off the power before replacing bulbs. Allow bulbs to cool completely before touching. Replace with E26 medium base incandescent bulbs, not exceeding 100 watts per bulb.

Dépannage

ProblèmeCause possibleSolution
La lumière ne s'allume pas.Power is off; faulty bulb; loose wiring.Check circuit breaker/fuse; replace bulb; check wiring connections (with power off).
Lumière vacillante.Loose bulb; incompatible dimmer switch; unstable power supply.Tighten bulb; ensure dimmer is compatible with bulb type; consult electrician.
Le luminaire bourdonne.Interrupteur variateur incompatible ; câblage desserré.Replace dimmer with compatible type; check wiring connections (with power off).

Garantie et assistance

Ce luminaire Progress Lighting est recouvert d'un Garantie limitée d'un an. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support. For detailed warranty terms and conditions, please refer to the official warranty document available at https://hubbellcdn.com/warranty/prog_93049973_d_warranty.pdf.

For further assistance or technical support, please contact Progress Lighting customer service.

© 2024 Progress Lighting. Tous droits réservés.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.