1. Introduction
This manual provides comprehensive service and repair information for the 2006 and 2007 model year Ford Taurus vehicles. It is designed for automotive technicians and experienced DIY enthusiasts, offering detailed instructions, specifications, and diagnostic procedures to assist in the proper maintenance and repair of the vehicle.
The content is organized into various sections, each covering specific vehicle systems or components. Always refer to the latest safety guidelines and use appropriate tools and equipment when performing any service or repair.
2. Informations générales et sécurité
2.1 Précautions de sécurité
Always prioritize safety when working on any vehicle. Disconnect the battery ground cable before working on electrical components. Allow the engine and exhaust system to cool before servicing. Use jack stands to support the vehicle when lifting. Wear appropriate personal protective equipment, including safety glasses and gloves.
2.2 Identification du véhicule
Locate the Vehicle Identification Number (VIN) on the driver's side dashboard, visible through the windshield, or on the driver's side door jamb. The VIN provides crucial information about the vehicle's manufacturing details and specifications.
3. Systèmes de moteurs
3.1 Engine Removal and Installation
Detailed steps for safely removing and installing the engine assembly. This section includes procedures for disconnecting all necessary hoses, wiring, and mounts, as well as torque specifications for reassembly.
3.2 Entretien du système d'alimentation en carburant
Instructions for servicing the fuel pump, fuel injectors, fuel lines, and fuel tank. Includes pressure testing procedures and safety warnings for handling fuel.
3.3 Ignition System Diagnostics
Troubleshooting steps for common ignition system issues, including spark plug inspection, coil pack testing, and sensor diagnostics.
4. Transmission and Drivetrain
4.1 Automatic Transaxle Service
Procedures for fluid changes, filter replacement, and removal/installation of the automatic transaxle. Includes torque converter service and shift cable adjustments.
4.2 Drive Axle and CV Joints
Inspection, removal, and installation of drive axles and constant velocity (CV) joints. Includes boot replacement and lubrication guidelines.
5. Chassis and Suspension
Suspension avant 5.1
Service procedures for front struts, control arms, ball joints, and stabilizer bar. Includes alignment specifications.
5.2 Suspension arrière
Service procedures for rear shocks, springs, and trailing arms. Includes alignment specifications.
5.3 Système de direction
Power steering pump, rack and pinion, and steering column service. Includes fluid flushing and bleeding procedures.
6. Système de freinage
6.1 Disc Brake Service
Replacement of brake pads, rotors, and caliper overhaul procedures for both front and rear disc brakes. Includes brake fluid bleeding.
6.2 Système de freinage antiblocage (ABS)
Diagnostic procedures for ABS components, including wheel speed sensors and the ABS control module.
7. Electrical and Electronic Systems
7.1 Schémas de câblage
Comprehensive wiring diagrams for all major electrical circuits, including power distribution, lighting, and accessory systems.
7.2 Test des composants
Procedures for testing various electrical components such as relays, switches, sensors, and motors using a multimeter.
7.3 Codes de diagnostic (DTC)
Explanation of common DTCs and their diagnostic steps using an OBD-II scanner.
8. Body and Interior
8.1 Exterior Body Panels
Removal and installation procedures for fenders, bumpers, doors, and hood. Includes adjustment guidelines.
8.2 Interior Trim and Components
Instructions for removing and installing dashboard components, door panels, seats, and console. Includes airbag system precautions.
9. Maintenance Schedules
Recommended service intervals for routine maintenance tasks, including:
- Vidange d'huile et changement de filtre
- Rotation des pneus et vérification de la pression
- Fluid level checks (coolant, brake, power steering, transmission)
- remplacement du filtre à air et du filtre d'habitacle
- Spark plug inspection/replacement
- Inspection du système de freinage
10. Dépannage et diagnostic
This section provides diagnostic charts and procedures for common vehicle issues, such as:
- Engine no-start conditions
- Rough idle or poor performance
- Brake noise or pulsation
- Steering system play or noise
- Electrical system malfunctions
Follow the diagnostic flowcharts to systematically identify and resolve problems.
11. Spécifications techniques
Detailed technical data for the 2006-2007 Ford Taurus, including:
- Engine torque specifications
- Capacités et types de fluides
- Tire sizes and pressures
- valeurs de résistance des composants électriques
- Alignment settings
Always refer to these specifications for accurate repairs and adjustments.
12. Informations sur la garantie et l'assistance
This repair manual is an independent publication and does not imply any affiliation with or endorsement by Ford Motor Company. For specific vehicle warranty information, please refer to your original vehicle owner's manual or contact an authorized Ford dealership. Support for this manual is typically provided by the publisher or retailer from whom it was purchased.
