1. Produit terminéview
The ForceField FireGuard is a flame retardant and protection solution designed to prevent the spread of flames and reduce smoke development in various materials. This 22 oz (650 ml) product is formulated to be non-hazardous and environmentally friendly, meeting national fire safety standards.
Caractéristiques principales :
- Ignifuge : Helps prevent flames from igniting or spreading on treated drapes, clothing, furniture, and other materials.
- Smoke Reduction: Reduces smoke development in the event of a fire.
- Stain Protection: Suitable for fabrics not previously treated with waterproofing stain protection, as it is water-based.
- National Standard Compliant: Successfully tested and meets standards established by the National Fire Protection Association (NFPA) Test Method.
- Safe & Easy: Features a non-hazardous, environmentally friendly formula that is easy to apply and clean up.
Image 1.1: ForceField FireGuard 22 oz (650 ml) bottle.
Image 1.2: Visual comparison showing unprotected fabric burning rapidly versus fabric treated with FireGuard, which resists ignition.
2. Consignes de sécurité
Read all instructions and safety warnings before using ForceField FireGuard. Keep this manual for future reference.
Précautions générales de sécurité :
- Tenir hors de portée des enfants et des animaux de compagnie: Store the product in a secure location.
- Ventilation: Use in a well-ventilated area to avoid inhalation of spray mist.
- Contact avec les yeux et la peau : Avoid direct contact with eyes and skin. In case of contact, rinse thoroughly with water. If irritation persists, seek medical attention.
- Ingestion: Ne pas ingérer. En cas d'ingestion, ne pas faire vomir. Appeler immédiatement un centre antipoison ou un médecin.
- Inflammabilité : While this product is a flame retardant, it is not fireproof. Treated materials will resist ignition and slow flame spread but can still burn under extreme conditions.
- Compatibilité matérielle : Only use on water-safe materials. Test on an inconspicuous area first to check for color stability and material reaction.
- Stockage: Store in a cool, dry place away from direct sunlight and extreme temperatures. Keep container tightly closed.
Image 2.1: ForceField FireGuard is designed to be environmentally friendly and non-toxic.
3. Mode d'emploi
Follow these steps for optimal application and fire protection.
Préparation:
- Surface propre : Ensure the material to be treated is clean and dry. Remove any dust, dirt, or debris.
- Zone d'essai: Always test the product on an inconspicuous area of the material first. Allow it to dry completely and check for any discoloration, texture changes, or adverse reactions. This is crucial for maintaining the aesthetic integrity of your items.
- Ventilation: Work in a well-ventilated area, preferably outdoors or in a room with open windows.
- Protect Surroundings: Cover any surrounding surfaces or items that you do not wish to treat to prevent overspray.
Étapes de candidature :
- Bien agiter : Shake the ForceField FireGuard bottle thoroughly before each use.
- Spray Evenly: Hold the spray bottle approximately 6-8 inches (15-20 cm) from the surface. Apply a fine, even mist to the entire surface of the material. Ensure complete saturation without over-wetting.
- Couverture: One 22 oz bottle typically covers up to 88 square feet, depending on the material's absorbency.
- Laisser sécher : Let the treated material air dry completely. Drying time may vary depending on humidity, temperature, and material thickness. Avoid handling or using the item until it is fully dry.
- Nouvelle demande : For highly absorbent materials or for enhanced protection, a second coat may be applied after the first coat has dried.
Image 3.1: A 22 oz bottle of FireGuard covers up to 88 sq. ft. for easy application.
Image 3.2: ForceField FireGuard can be applied to a wide range of surfaces including curtains, rugs, and furniture.
4. Entretien
Proper maintenance ensures the longevity and effectiveness of the FireGuard treatment.
- Cleaning Treated Items: For best results, clean treated items according to their manufacturer's instructions. If an item is machine washable, reapplication of FireGuard may be necessary after washing to restore full flame retardant properties.
- Fréquence de réapplication : The effectiveness of the flame retardant can diminish over time due to wear, cleaning, or exposure to environmental factors. Regular inspection of treated items is recommended. Reapply FireGuard as needed, especially after cleaning or if the material shows signs of reduced protection.
- Storage of Product: Store the FireGuard bottle in its original container, tightly closed, in a cool, dry, and well-ventilated area. Do not allow the product to freeze.
5. Dépannage
If you encounter issues while using ForceField FireGuard, refer to the following common solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Material discolors or changes texture after application. | Material is not water-safe or was not tested on an inconspicuous area. | Always perform a spot test on an inconspicuous area before full application. This product is for water-safe materials only. |
| Strong odor after application. | Insufficient ventilation during or after application. Some materials may react with the product to produce a temporary odor. | Ensure adequate ventilation during and after application. The odor should dissipate as the product dries. If it persists, air the item outdoors if possible. |
| Product does not seem effective. | Insufficient application, material too absorbent, or product has worn off. | Ensure even and thorough saturation. For highly absorbent materials, apply a second coat after the first has dried. Reapply periodically, especially after cleaning. |
| Residue or tackiness on treated surface. | Over-application or specific material type. | Apply a fine, even mist to avoid over-saturation. For some materials, a slight residue may be unavoidable. If tacky, try wiping gently with a damp cloth after drying. |
6. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Nom du produit | ForceField FireGuard Flame Retardant and Protection |
| Marque | Champ de force |
| Numéro de modèle | F FGD 22C6 |
| Volume | 22 oz (650 ml) |
| Poids de l'article | 1.38 livres |
| Dimensions du produit | 12 x 39370.1 x 39370.1 pouces (Note: Dimensions seem unusually large, please refer to product packaging for accurate measurements.) |
| Fabricant | ForceField® |
| Conformité | Meets National Fire Protection Association (NFPA) Test Method standards. |
7. Garantie et assistance
For specific warranty information or technical support regarding your ForceField FireGuard product, please contact the manufacturer directly.
Fabricant: ForceField®
Refer to the product packaging or the official ForceField webConsultez ce site pour obtenir les informations de contact et les détails de garantie les plus récents.