Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your Blade 120SR Battery Mount (Part Number BLH3123). Please read this manual thoroughly before proceeding with any procedures to ensure proper function and longevity of the component.
Précautions de sécurité
- Always disconnect the battery from the aircraft before performing any installation or maintenance.
- Use appropriate tools to avoid damaging the component or surrounding parts.
- Gardez les petites pièces hors de portée des enfants.
Contenu du colis
- 1x Blade 120SR Battery Mount (BLH3123)
- (Additional fasteners or components may be included depending on the specific kit)
Configuration et installation
This section details the steps required to install the Blade 120SR Battery Mount onto your aircraft.
- Préparation: Ensure the aircraft's power is off and the battery is disconnected. Place the aircraft on a stable, clean surface.
- Remove Old Mount (if applicable): Carefully unscrew and remove the existing battery mount from the aircraft chassis. Note the orientation and attachment points.
- Position New Mount: Align the new Blade 120SR Battery Mount (BLH3123) with the designated mounting points on the aircraft frame. Ensure the orientation matches the original component.
- Fixation sécurisée : Using the appropriate small screws (typically M1 or M2, not included with mount unless specified), gently secure the battery mount to the chassis. Do not overtighten screws, as this can strip the plastic or threads.
- Vérifier l'installation : Gently tug on the installed mount to ensure it is firmly attached and does not wobble.
Image: The Blade 120SR Battery Mount (BLH3123) showing its structure and mounting points. This component is designed to securely hold the battery in place on the Blade 120SR helicopter.
Mode d'emploi
Once the battery mount is installed, follow these steps to properly secure and use your battery.
- Insérer la batterie : Slide the compatible battery into the designated slot on the battery mount. Ensure it fits snugly without excessive force.
- Batterie sécurisée : If your aircraft model includes a battery strap or clip, use it to further secure the battery in the mount. This prevents movement during flight.
- Connectez la batterie : Connect the battery's power lead to the aircraft's power connector.
- Vérification avant vol : Before flight, always perform a visual inspection to confirm the battery is securely seated and the mount is intact.
Entretien
Regular inspection and maintenance will help prolong the life of your battery mount.
- Inspection visuelle : Periodically inspect the battery mount for any signs of cracks, stress marks, or deformation, especially after hard landings or impacts.
- Nettoyage: If necessary, gently clean the mount with a soft, dry cloth to remove dust or debris. Avoid using harsh chemicals.
- Vérification des fixations : Ensure all screws securing the mount are tight. Retighten if loose, but do not overtighten.
- Remplacement: If the mount shows significant wear, damage, or no longer holds the battery securely, replace it immediately with a genuine Blade BLH3123 part.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Battery mount is loose. | Les vis de fixation sont desserrées ou abîmées. | Tighten screws. If threads are stripped, consider using a slightly larger screw (if safe for the aircraft) or replacing the mount/chassis part. |
| Battery does not fit securely. | Incorrect battery size or damaged mount. | Ensure you are using the correct battery for the Blade 120SR. Inspect the mount for damage and replace if necessary. |
| Mount is cracked or broken. | Dommages causés par un impact ou fatigue des matériaux. | Replace the battery mount with a new Blade BLH3123 part. |
Caractéristiques
- Modèle: BLH3123
- Marque: Lame
- Fabricant: Passe-temps Horizon
- Dimensions du produit : 3 x 2 x 0.66 pouces (7.62 x 5.08 x 1.68 cm)
- Poids de l'article : 0.16 onces (4.54 grammes)
- Âge recommandé : 14 ans et plus
- ASIN: B003TRNTCW
Garantie et assistance
For warranty information or technical support regarding your Blade 120SR Battery Mount, please contact Horizon Hobby directly. Refer to the official Horizon Hobby webVeuillez consulter le site web ou l'emballage de votre produit pour obtenir les coordonnées et les conditions de garantie les plus récentes.
Fabricant: Passe-temps Horizon
Website: www.horizonhobby.com