Broan-NuTone CT700 Deluxe Electric Power Brush Instruction Manual

1. Introduction

Thank you for choosing the Broan-NuTone CT700 Deluxe Electric Power Brush. This power brush is designed to enhance your central vacuum system, providing deep cleaning action for carpets and floors. It features a motorized roller bar with nylon brushes, adjustable height settings, and built-in LED lights for improved visibility. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new power brush.

Figure 1: Broan-NuTone CT700 Deluxe Electric Power Brush

2. Informations importantes sur la sécurité

• Always disconnect the power brush from the central vacuum hose before performing any maintenance or cleaning.
• Do not use the power brush on wet surfaces or to pick up liquids.
• Gardez les cheveux, les vêtements amples, les doigts et toutes les parties du corps éloignés des ouvertures et des pièces mobiles.
• Utiliser uniquement comme décrit dans ce manuel. Utiliser uniquement les accessoires recommandés par le fabricant.
• Inspect the power brush and hose for any damage before each use. Do not use if damaged.

3. Installation

3.1 Attaching the Power Brush to the Wand

The CT700 power brush is designed to connect securely to your central vacuum wand. Ensure the wand is compatible with the power brush's electrical connections.

1. Align the electrical pins on the power brush's connector with the corresponding slots on your central vacuum wand.
2. Push the wand firmly into the power brush's connector until it clicks into place. Ensure a secure connection for both mechanical stability and electrical contact.

3.2 Connecting to the Central Vacuum System

Once the power brush is attached to the wand, connect the central vacuum hose to a wall inlet. The power brush will receive power through the hose's electrical connection to the central vacuum unit.

4. Mode d'emploi

4.1 Mise sous/hors tension

The power brush is activated via the central vacuum system's hose. When the central vacuum is turned on (typically via a switch on the hose handle), the power brush will receive power, and its motorized roller bar will begin to spin.

4.2 lumières LED

The CT700 features built-in, full-width LED lights that illuminate the cleaning path, maximizing visibility and ensuring no dirt or debris is missed, especially in dimly lit areas or under furniture.

Figure 2: Built-in LED lights for enhanced visibility

4.3 Réglage de la hauteur

The power brush offers 4-position height adjustments to optimize cleaning for various carpet types and floor surfaces. This adjustment is typically made using a foot pedal located on the power brush. Press the pedal to cycle through the height settings:

• Réglage le plus bas: Ideal for hard floors and low-pile carpets.
• Paramètres moyens: Suitable for medium-pile carpets.
• Réglage le plus élevé: Recommended for high-pile or shag carpets.

Figure 3: Floor height indicator with multiple settings

4.4 Maniabilité

The power brush features a built-in steering element and non-marking, rubberized coated wheels. This design provides maximum maneuverability, allowing for easy navigation around furniture and along baseboards. The brush release pedal also allows for a low profile, enabling access to hard-to-reach areas like under beds or couches.

Figure 4: Power brush effectively cleaning carpet

4.5 Vidéo officielle du produit

Vidéo 1 : Cette vidéo présente un aperçuview of the Broan-NuTone central vacuum systems and accessories, highlighting features like powerful suction, quiet operation, HEPA filtration, and customizable accessories. It demonstrates the general benefits and design principles of the system, including the power brush.

5. Entretien

5.1 Nettoyage du rouleau de brosse

Periodically inspect the motorized roller bar for tangled hair, strings, or debris. To clean:

1. Disconnect the power brush from the central vacuum hose.
2. Turn the power brush upside down.
3. Carefully cut away any tangled hair or debris from the brush roll using scissors. Be careful not to damage the bristles or the belt.
4. Assurez-vous que la brosse rotative tourne librement après le nettoyage.

Figure 5 : Dessous view of the power brush, showing the brush roll

5.2 Remplacement de la courroie

The motorized brush roll is driven by a belt. If the brush roll stops spinning or makes unusual noises, the belt may need replacement. Refer to the detailed instructions provided with replacement belts or consult a qualified service technician.

6. Compatibilité

The Broan-NuTone CT700 Deluxe Electric Power Brush is designed for use with specific Broan-NuTone central vacuum hoses. Compatible hoses include:

• Broan-NuTone CH520 Hose
• Broan-NuTone CH515 Hose
• Broan-NuTone CH615 Hose
• Broan-NuTone CH620 Hose

Using non-compatible hoses may result in improper function or damage to the power brush or central vacuum system.

7. Spécifications

8. Dépannage

9. Garantie et assistance

Please note that this product is indicated to have no manufacturer's warranty. For any product inquiries, technical assistance, or to purchase replacement parts, please contact Broan-NuTone customer support directly. Refer to the official Broan-NuTone website or your central vacuum system documentation for contact information.