Snuza Go! Portable Baby Movement Monitor User Manual

1. Introduction

The Snuza Go! is a portable baby movement monitor designed to detect your baby's abdominal movements. This device provides an audible alarm if no movement is detected for a specified period, or if movements become weak or infrequent. It is small, lightweight, and clips directly onto your baby's diaper.

Remarque importante : This product does not reduce or protect against SIDS. Use as directed on the box and by the intended use of the manufacturer.

2. Installation

2.1 Déballage et inspection initiale

Carefully remove the Snuza Go! monitor from its packaging. Inspect the device for any visible damage. Ensure all components are present, including the monitor unit and its protective carrying case.

Figure 1: Snuza Go! monitor inside its clear protective carrying case.

2.2 Battery Installation (if required)

The Snuza Go! uses a Lithium-Ion battery. If the device does not power on, or if the battery indicator shows low power, refer to the battery compartment instructions on the device for proper installation or replacement. Ensure correct polarity.

2.3 First Use and Testing

Before first use on a baby, it is recommended to test the monitor. Turn the device on and place it on a stable surface. After 15, 18, or 20 seconds (depending on the set alarm period), the audible alarm should sound, indicating proper function.

3. Mode d'emploi

3.1 Fixation du moniteur

The Snuza Go! is designed to clip securely onto your baby's diaper. Position the monitor so that the flexible sensor tip makes direct contact with your baby's abdomen. Ensure the diaper is snug to prevent the monitor from dislodging or losing contact.

Figure 2: Snuza Go! monitor with its flexible sensor tip and clip.

3.2 Mise sous/hors tension

• Pour allumer : Appuyez et maintenez le bouton enfoncé MARCHE/ARRÊT button until the indicator lights illuminate.
• Pour éteindre : Appuyez et maintenez le bouton enfoncé MARCHE/ARRÊT button until the indicator lights turn off.

3.3 Movement Detection and Alarms

The ultra-sensitive flexible tip continuously monitors your baby's abdominal movements. The monitor features two primary alert functions:

1. No Movement Alarm: If no movement is detected for 20 seconds, an audible alarm will sound. This 20-second period can be adjusted to 15 or 18 seconds via the device settings.
2. Movement-Rate Indicator: The Snuza Go! will also alert you if your baby's movements are very weak or fall to less than 8 movements per minute. This indicator provides an early warning for infrequent movement.

3.4 Réglage des paramètres d'alarme

Refer to the device's specific buttons (e.g., "mode" button if present, or a combination of ON/OFF presses) to adjust the no-movement alarm period (15, 18, or 20 seconds). Consult the quick start guide included with your product for detailed instructions on setting adjustments.

4. Entretien

4.1 Nettoyage du moniteur

To clean the Snuza Go!, gently wipe the device with a soft, damp cloth. Do not immerse the monitor in water or use harsh cleaning agents, as this can damage the electronic components and sensor. Ensure the device is completely dry before storage or next use.

4.2 Remplacement de la batterie

When the battery indicator shows low power, or if the device fails to power on, the Lithium-Ion battery may need replacement. Open the battery compartment as indicated on the device, remove the old battery, and insert a new one, ensuring correct polarity. Dispose of old batteries responsibly according to local regulations.

4.3 Stockage

When not in use, store the Snuza Go! in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. This helps protect the sensor and prolong the device's lifespan.

5. Dépannage

5.1 Alarm Sounds Frequently

• Vérifier l'emplacement : Ensure the monitor is securely clipped to the diaper and the sensor tip is in firm contact with the baby's abdomen. A loose fit can lead to false alarms.
• Diaper fit: A loose diaper may cause the monitor to lose contact. Ensure the diaper is snug.
• Baby's activity: If the baby is very active or rolling, the monitor might shift, causing temporary loss of contact. Consider repositioning or adjusting the diaper.

5.2 L'appareil ne s'allume pas

• Vérification de la batterie: Verify that the battery is correctly installed and fully charged. Replace the battery if necessary.
• Dommage: Inspect for any visible damage to the device. If damaged, contact customer support.

5.3 Weak or Infrequent Movement Alert

If the Movement-Rate Indicator alerts, ensure the monitor is correctly positioned and making good contact. If the issue persists, consult a healthcare professional.

6. Spécifications

7. Informations sur la garantie

For detailed warranty information regarding your Snuza Go! monitor, please refer to the warranty card included with your product packaging or visit the official Snuza webLes conditions de garantie peuvent varier selon la région et la date d'achat.

8. Assistance clientèle

If you require further assistance, have questions about your Snuza Go! monitor, or need technical support, please contact Snuza customer service. You can typically find contact information, FAQs, and additional resources on the official Snuza website:

www.snuza.com

Please have your product model number (Snuza go!) and purchase details ready when contacting support.