Introduction
This manual provides essential information for the safe and proper installation, operation, and maintenance of your Leviton 15 Amp, 125 Volt, Tamper-Resistant Duplex Receptacle (Model 25249-TFB). This commercial-grade, self-grounding receptacle features a straight blade design and a brass finish, engineered for demanding environments such as hotels, schools, hospitals, and commercial office buildings. It is designed to withstand rigorous use and offers enhanced safety features.
Consignes de sécurité
AVERTISSEMENT: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.
Avertissement concernant la Proposition 65 : Ce produit peut contenir des produits chimiques connus de l'État de Californie pour causer le cancer et des malformations congénitales ou d'autres troubles de la reproduction. Se laver les mains après manipulation.
- N’utilisez pas cet appareil avec du câblage en aluminium. Utilisez-le uniquement avec du câblage en cuivre ou en cuivre plaqué.
- Assurez-vous que toutes les connexions sont bien serrées et sécurisées afin d'éviter toute surchauffe.
- This receptacle is tamper-resistant, designed to prevent insertion of foreign objects into the receptacle openings.
- Ne pas dépasser les valeurs électriques spécifiées de 15 Amps et 125 volts.
Caractéristiques du produit
- TampConception très résistante : Meets NEC 2020 article 406.12, providing enhanced safety by preventing the insertion of single objects into the receptacle openings.
- Qualité commerciale : Built to withstand demanding environments, ensuring durability and long-term performance.
- Mise à la terre automatique : Features an integral self-grounding clip for quick and easy installation into a properly grounded metal box.
- Construction durable : Thermoplastic receptacle face and body resist breakage.
- Ready-To-Wire Unit: All-in-one design facilitates quick and easy installation.
Image: Leviton 25249-TFB Tamper-Resistant Duplex Receptacle, Brass Finish. This image shows the front view of the receptacle with its brass faceplate and two tampprises résistantes aux intempéries.
Configuration et installation
Installation of electrical devices should only be performed by qualified personnel. Always ensure power is disconnected before beginning any work.
- Couper l'alimentation : Locate the circuit breaker or fuse that supplies power to the outlet where the receptacle will be installed. Turn it off and verify that power is off using a voltage testeur.
- Retirer l'ancien réceptacle (le cas échéant) : Carefully remove the existing wall plate and receptacle from the electrical box. Disconnect the wires, noting their connections (hot, neutral, ground).
- Préparez les fils : Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wires are straight.
- Connecter les fils :
- Connectez le hot (black) wire to the brass-colored screw terminal.
- Connectez le neutre (blanc) wire to the silver-colored screw terminal.
- Connectez le terre (cuivre vert ou nu) wire to the green screw terminal. This receptacle is self-grounding, meaning it will ground itself to a properly grounded metal box via its mounting strap.
- Réceptacle de montage : Carefully fold the wires into the electrical box, then insert the new receptacle and secure it with the mounting screws provided.
- Installez la plaque murale : Attach the decorative wall plate (sold separately) over the receptacle.
- Restaurer l'alimentation : Remettez le courant au niveau du disjoncteur ou du tableau électrique.
- Test: Test the receptacle with a known working appliance or receptacle tester to ensure proper function.
Image : Dos view of the Leviton 25249-TFB receptacle, showing the screw terminals for wiring connections (hot, neutral, ground).
Mode d'emploi
The Leviton 25249-TFB Tamper-Resistant Duplex Receptacle operates like a standard electrical outlet, with added safety features.
- Branchement : Insert the plug of your appliance or device firmly into one of the two receptacle openings. The tamper-resistant shutters may require slightly more force to open than a traditional receptacle. Ensure both prongs are inserted simultaneously and evenly.
- Débranchement : Grasp the plug and pull it straight out from the receptacle. Do not pull by the cord.
- Capacité de charge: Do not overload the receptacle. The total current drawn by all connected devices should not exceed 15 Amps.
Entretien
The Leviton 25249-TFB receptacle requires minimal maintenance.
- Nettoyage: To clean the receptacle face, ensure power is off at the circuit breaker. Use a soft, damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
- Inspection: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power and have the receptacle inspected and replaced by a qualified electrician.
- Considérations environnementales : While durable, avoid exposing the receptacle to excessive moisture or extreme temperatures beyond its operational specifications.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de courant à la prise. | Disjoncteur déclenché ou fusible grillé. Mauvaise connexion électrique. | Check and reset the circuit breaker or replace the fuse. If problem persists, turn off power and check wiring connections. Consult an electrician if necessary. |
| La prise ne s'insère pas facilement. | TampLes volets anti-incendie sont activés. | Ensure both prongs of the plug are aligned and inserted simultaneously and firmly. Do not force the plug. |
| Le récipient est chaud. | Overloaded circuit. Loose wiring connection. | Unplug some devices to reduce load. Turn off power and check wiring connections. If warmth persists, consult an electrician immediately. |
Caractéristiques
- Modèle: 25249-TFB
- Ampâge : 15 Amps
- Voltage: 125 volts
- Configuration: 5-15R
- Nombre de pôles : 2
- Nombre de fils: 3
- Mise à la terre : Mise à la terre automatique
- Matériel: Nylon (body), Brass (finish)
- Couleur: Finition en laiton
- Normes et certifications : UL 498, CSA C22.2, NOM 057 Approved
- Prises de courant totales : 2
Garantie et assistance
Garantie: This Leviton product is backed by a 10-Year Limited Warranty. For detailed warranty terms and conditions, please refer to the official Leviton website ou contacter le support client.
Assistance clientèle : For technical assistance, troubleshooting, or warranty claims, please visit the official Leviton website or contact their customer service department. Contact information can typically be found on the product packaging or the Leviton website.