Intermatic TN111CL Lamp & Appliance Timer User Manual

1. Introduction

This manual provides instructions for the safe and efficient operation of your Intermatic TN111CL Lamp & Appliance Timer. Please read these instructions thoroughly before using the device and retain them for future reference. The TN111CL timer is designed to automatically turn lamps and appliances ON and OFF at preset times, offering convenience and energy management.

2. Consignes de sécurité

• Utilisation en intérieur uniquement : This timer is intended for indoor use in dry locations. Do not expose to rain or moisture.
• Tarif Electrique: Do not exceed the electrical ratings of the timer. Refer to the 'Specifications' section for details. Overloading the timer can cause overheating and fire.
• Mise à la terre : Assurez-vous que la minuterie est branchée sur une prise de courant correctement mise à la terre.
• Enfants: Tenir hors de portée des enfants. Ce n'est pas un jouet.
• Nettoyage: Débranchez le minuteur avant de le nettoyer. Utilisez un chiffon sec ; n’utilisez pas de nettoyants liquides.
• Réparations: Do not attempt to repair or disassemble the timer. Refer all servicing to qualified service personnel.

3. Produit terminéview

The Intermatic TN111CL is a mechanical timer featuring an easy-set dial for scheduling ON/OFF operations. It is designed for use with various lamps and small appliances.

Caractéristiques principales :

• 2 ON/OFF settings per 24-hour period.
• Easy-Set Dial for simple programming.
• Minimum ON/OFF time: 1/2 hour.
• Maximum ON/OFF time: 23 1/2 hours.

Diagramme du produit:

Figure 1 : Face avant view of the Intermatic TN111CL Lamp & Appliance Timer, showing the central dial and outlet.

4. Installation

1. Branchez la minuterie : Insert the timer into a standard 125V AC wall outlet.
2. Définir l'heure actuelle : Rotate the entire dial clockwise until the current time aligns with the arrow indicator on the timer's face. The dial is marked in 15-minute increments. Ensure you distinguish between AM and PM hours (e.g., 3 PM is 15:00 on a 24-hour clock).
3. Appareil branché : Branchez le lamp or appliance you wish to control into the outlet on the side of the timer. Ensure the appliance's power switch is in the ON position.

5. Mode d'emploi

The TN111CL timer uses a series of pins around the dial to set ON and OFF times.

1. Identifier les broches : The dial has segments that can be pushed inwards or pulled outwards. Each segment represents 15 minutes.
2. Régler l'heure de mise en marche : To set a period when the appliance should be ON, push the corresponding segments (pins) inwards. For example, if you want the appliance ON from 6:00 PM to 10:00 PM, push in all the pins between the 18:00 and 22:00 marks on the dial.
3. Régler l'heure d'arrêt : To set a period when the appliance should be OFF, pull the corresponding segments (pins) outwards. These are the default positions for the pins.
4. Commande manuelle : The timer typically has a manual override switch (often a small slider or button) that allows you to turn the connected appliance ON or OFF independently of the timer settings. Refer to the markings on your specific unit for its location and function (e.g., 'Timer ON', 'Timer OFF', 'Always ON').

The timer will cycle through the programmed ON/OFF settings daily. The minimum ON or OFF duration is 30 minutes (two 15-minute segments).

6. Entretien

• Nettoyage: To clean the timer, unplug it from the wall outlet. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
• Stockage: If storing the timer for an extended period, unplug it and keep it in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Inspectez régulièrement la minuterie et son cordon afin de déceler tout signe de dommage, comme des fils effilochés ou des fissures. En cas de dommage, cessez l'utilisation et remplacez l'appareil.

7. Dépannage

• L'appareil ne s'allume/ne s'éteint pas aux heures programmées :
  • Ensure the timer is plugged firmly into a working outlet.
  • Verify the appliance plugged into the timer is switched to the ON position.
  • Check that the current time is correctly set on the dial.
  • Confirm that the ON/OFF pins are correctly pushed in (ON) or pulled out (OFF) for the desired times.
  • Vérifiez la position du commutateur de commande manuelle.
• Timer makes a ticking sound:
  • This is normal for mechanical timers and indicates the internal clock mechanism is operating.
• Appliance remains ON or OFF constantly:
  • Check the manual override switch. It may be set to 'Always ON' or 'Always OFF'.
  • Re-verify the pin settings for your desired ON/OFF schedule.

8. Spécifications

9. Garantie et assistance

Garantie:

This Intermatic TN111CL Lamp & Appliance Timer comes with a GARANTIE À VIEVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.

Assistance clientèle :

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support directly. Refer to the official Intermatic webPour obtenir les coordonnées les plus récentes, veuillez consulter le site web ou l'emballage du produit.