Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Caractéristiques

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Programmation quotidienne et hebdomadaire : Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configurez jusqu'à 8 durées de commutation ON/OFF distinctes.
• Écran LCD : Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outaget.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• Options de montage : Designed for DIN rail mounting or wall mounting using the included bracket.
• Couverture protectrice transparente: Provides protection for the display and controls.

3. Configuration et installation

Avertissement: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Montage

The E305DIN1 timer can be mounted in two ways:

• Montage sur rail DIN : Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• Montage mural : Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Connexion électrique

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. Vérifiez minutieusement le serrage et l'exactitude de toutes les connexions avant de rétablir le courant.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Mode d'emploi

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Réglage de l'heure et de la date actuelles

1. Appuyez sur le HORLOGE bouton.
2. Tout en tenant HORLOGE, appuyez sur le JOUR bouton pour régler le jour actuel de la semaine.
3. Tout en tenant HORLOGE, appuyez sur le HEURE bouton pour régler l'heure actuelle.
4. Tout en tenant HORLOGE, appuyez sur le MIN bouton pour régler la minute actuelle.

4.2 Programmation des heures de marche/arrêt

The timer allows for up to 8 ON/OFF program pairs.

1. Appuyez sur le PROGRAMME button once to enter program mode. The display will show '1 ON'.
2. Utilisez le JOUR, HEURE, et MIN boutons permettant de régler la durée de marche souhaitée pour le programme 1.
3. Presse PROGRAMME À nouveau. L'écran affichera « 1 OFF ».
4. Utilisez le JOUR, HEURE, et MIN boutons permettant de régler la durée d'arrêt souhaitée pour le programme 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. Appuyez sur le HORLOGE button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• Appuyez sur le MANUEL bouton pour faire défiler les modes :
• SUR: La sortie est constamment activée, annulant toute période d'arrêt programmée.
• OFF: La sortie est constamment désactivée, annulant toute programmation de mise en marche.
• VOITURE: La minuterie fonctionne selon les plages horaires de marche/arrêt programmées.

5. Entretien

The Perel E305DIN1 timer requires minimal maintenance.

• Nettoyage: Essuyez l'extérieur avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
• Batterie de secours: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outagOui, la batterie pourrait devoir être remplacée par un technicien qualifié.
• Conditions environnementales : Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Dépannage

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• La minuterie ne s'allume/ne s'éteint pas comme prévu :
  • Vérifiez si la minuterie est en marche AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• L'écran est vide ou clignote :
  • Vérifiez l'alimentation principale du minuteur.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• La minuterie perd ses paramètres après une coupure de courant.tage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Si ces étapes ne résolvent pas le problème, veuillez contacter le service client.

7. Spécifications

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. Garantie et assistance

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Conservez votre reçu d'achat comme preuve d'achat à des fins de garantie.