Nasco LF01172U

Manuel d'utilisation du système d'entraînement à l'auscultation Nasco Life/form et du Smartscope

Model: LF01172U

Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of the Nasco Life/form Auscultation Trainer and Smartscope and Amplifier/speaker System, Model LF01172U. This system is designed to facilitate the learning and practice of auscultation skills, allowing users to identify various heart and lung sounds.

Consignes de sécurité

  • Lisez toutes les instructions avant d’utiliser le système.
  • Tenez le système à l'écart de l'eau ou d'une humidité excessive.
  • Utilisez uniquement l'adaptateur secteur fourni avec l'appareil.
  • N’essayez pas de démonter ou de réparer l’appareil vous-même. Confiez toute intervention à un personnel qualifié.
  • Assurer une ventilation adéquate autour de l' ampsystème de lificateur/haut-parleurs.

Contenu du colis

Vérifiez que tous les composants sont présents lors du déballage :

  • Life/form Auscultation Trainer Torso
  • Smartscope
  • Amplificateur/système de haut-parleurs
  • Unité de contrôle à distance
  • Adaptateur secteur
  • Manuel d'instructions (ce document)
  • Auscultation Site Map

Installation

  1. Place the Trainer: Position the Life/form Auscultation Trainer torso on a stable, flat surface.
  2. Connecter Amplificateur/haut-parleur : Connectez le amplifier/speaker system to a power source using the provided power adapter.
  3. Connect Smartscope: Plug the Smartscope into the designated port on the ampsystème de lificateur/haut-parleurs.
  4. Télécommande: Ensure the remote control unit has fresh batteries installed. The remote is used to select and control the auscultation sounds.
Nasco Life/form Auscultation Trainer System components and usage example

Description de l'image : This image displays the Nasco Life/form Auscultation Trainer system in use and its key components. In the upper portion, a person in a white lab coat is using the Smartscope on the chest of a tan-colored torso mannequin, simulating a patient. Another person stands nearby, holding the remote control unit. The lower left shows a diagram illustrating anterior and posterior heart and lung auscultation sites on a human torso. The lower right shows the Smartscope connected to an amplifier/speaker unit, alongside the remote control.

Mode d'emploi

  1. Mise sous tension : Allumez le ampsystème de lificateur/haut-parleurs.
  2. Sélectionnez Son : Use the remote control unit to select the desired heart or lung sound. The remote typically has buttons for different sound categories and specific sounds within those categories.
  3. Auscultate: Place the diaphragm of the Smartscope on the appropriate auscultation site on the trainer's torso. Refer to the included Auscultation Site Map for correct placement.
  4. Écouter: Listen to the selected sound through the Smartscope. The amplifier/speaker system will project the sound, allowing multiple users to hear simultaneously.
  5. Régler le volume : Réglez le volume à l'aide des commandes du amplifier/speaker system or the remote control.
  6. Change Sounds: Use the remote to switch between different heart and lung sounds for varied practice scenarios.

Entretien

  • Nettoyage: Wipe the trainer torso and Smartscope with a damp Un chiffon et du savon doux. Évitez les produits chimiques agressifs et les nettoyants abrasifs.
  • Stockage: Store the system in a cool, dry place away from direct sunlight when not in use.
  • Remplacement de la batterie : Replace batteries in the remote control unit as needed.
  • Entretien des câbles : Avoid kinking or sharply bending cables to prevent damage.

Dépannage

ProblèmeCause possibleSolution
No sound from Smartscope/Speaker
  • Alimentation non connectée
  • Volume trop faible
  • Smartscope not properly connected
  • Remote control batteries low
  • Ensure power adapter is plugged in and unit is turned on.
  • Augmenter le volume sur amplifier/speaker or remote.
  • Check Smartscope connection to amplificateur/haut-parleur.
  • Remplacez les piles de la télécommande.
Incorrect sound playing
  • Wrong sound selected on remote
  • Smartscope not on correct auscultation site
  • Re-select desired sound using the remote control.
  • Verify Smartscope placement using the Auscultation Site Map.
La télécommande ne répond pas
  • Piles faibles ou mortes
  • Obstruction entre la télécommande et le récepteur
  • Remplacer les piles.
  • Ensure clear line of sight between remote and amplificateur/haut-parleur.

Caractéristiques

  • Modèle: LF01172U
  • Type de produit: Auscultation Trainer System
  • Composants: Trainer Torso, Smartscope, Amplifier/Speaker, Remote Control
  • Source d'alimentation : AC Adapter (specific voltage/current not provided)
  • Fabricant: Je suis née
  • Date de mise en ligne sur Amazon : 2 février 2022

Garantie et assistance

Specific warranty information for the Nasco Life/form Auscultation Trainer and Smartscope System, Model LF01172U, is not provided in this document. Please refer to the official Nasco website or contact Nasco customer support for detailed warranty terms and technical assistance.

Pour obtenir de l'aide supplémentaire, visitez le site Nasco Store on Amazon or the official Nasco website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.