Pyramid PW1248USX

Pyramid PW1248USX 12-Inch 8 Ohm Subwoofer User Manual

1. Introduction

Thank you for choosing the Pyramid PW1248USX 12-Inch 8 Ohm Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your subwoofer. The PW1248USX features a black strong non-pressed paper cone, non-fatiguing rubber suspension, a stamped steel basket, and a bumped & vented motor structure. It is equipped with a 2-inch high-temperature Kapton voice coil and an 8 Ohm impedance, designed for 300 Watts RMS and 500 Watts Peak power handling.

2. caractéristiques du produit

  • Modèle: PW1248USX
  • Type de haut-parleur : Subwoofer de 12 pouces
  • Matériel de cône: Black Strong Non-Pressed Paper Cone
  • Entourer: Non-Fatiguing Rubber Suspension
  • Panier: StampPanier en acier ed
  • Structure du moteur : Bumped & Vented
  • Bobine vocale : 2-Inch High Temperature Kapton
  • Impédance: 8 Ohms
  • Puissance admissible : 300 Watts RMS / 500 Watts crête
  • SPL @ 1W/1M: 89 dB
  • Poids de l'aimant: 60 onces
  • Diamètre global: 12.28 pouces
  • Profondeur de montage : 5 pouces

3. Consignes de sécurité

Always ensure proper handling and installation to prevent damage to the subwoofer or other components. Disconnect power before making any connections. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please handle with care and wash hands after handling.

4. Installation et configuration

4.1 Déballage

Carefully remove the subwoofer from its packaging. Inspect for any signs of damage during transit. Retain all packaging materials for future use or return if necessary.

4.2 Montage

The Pyramid PW1248USX is a 12-inch subwoofer designed for car audio or home theater applications. Ensure the mounting location provides adequate space and structural integrity to support the subwoofer's weight and accommodate its dimensions. The overall diameter is 12.28 inches, and the mounting depth is 5 inches. Proper enclosure design is crucial for optimal performance.

Pyramid PW1248USX 12-Inch Subwoofer with dimensions

Côté view of the Pyramid PW1248USX subwoofer with key dimensions: 12.52 inches height, 12.8 inches width, and 6.06 inches mounting depth. This image illustrates the physical size and mounting requirements.

4.3 Câblage

This subwoofer has an 8 Ohm impedance. Connect the subwoofer to an appropriate amplifier output. Ensure correct polarity (+ to + and - to -) to avoid phase issues that can degrade sound quality. Refer to your ampConsultez le manuel de l'amplificateur pour obtenir les schémas de câblage spécifiques et les recommandations d'adaptation d'impédance.

5. Fonctionnement

Once installed and wired correctly, power on your audio system. Start with the volume at a low level and gradually increase it. Adjust the subwoofer's gain and crossover settings on your amplifier to blend seamlessly with your main speakers. Avoid operating the subwoofer at excessively high volumes for extended periods to prevent damage.

Pyramid PW1248USX 12-Inch Subwoofer front view

Devant view of the Pyramid PW1248USX subwoofer, showcasing its black non-pressed paper cone and rubber suspension. This is the primary listening surface of the subwoofer.

6. Entretien

  • Nettoyage: Use a soft, dry cloth to wipe down the subwoofer cone and frame. Avoid using harsh chemicals or abrasive cleaners.
  • Inspection: Periodically check the speaker terminals for secure connections and inspect the rubber surround for any signs of wear or damage.
  • Environnement: Ensure the subwoofer is installed in a dry environment, away from direct sunlight and extreme temperatures.

7. Dépannage

  • Pas de son : Check all wiring connections, ensuring they are secure and correctly polarized. Verify the amplificateur est sous tension et fonctionne correctement.
  • Son déformé : Baissez le volume. Vérifiez amplifier gain and crossover settings. Ensure the subwoofer is not overdriven.
  • Basse faible : Verify phase settings. Check enclosure integrity and ensure it is sealed properly if designed as a sealed enclosure.

8. Spécifications

FonctionnalitéSpécification
MarquePyramide
Numéro de modèlePW1248USX
Type de haut-parleurCaisson de basses
Diamètre du caisson de basses12 pouces
Diamètre du woofer12 pouces
Impédance8 Ohms
Puissance de sortie maximale du haut-parleur500 watts (crête)
Gestion de la puissance RMS300 watts
SPL à 1 W/1 m89 dB
Poids de l'aimant60 onces
Profondeur de montage5 pouces
Diamètre global12.28 pouces
Dimensions de l'article (P x L x H)12.52"P x 12.8"L x 6.06"H
Poids de l'article7 livres
CouleurNoir
Pays d'origineChine

9. Garantie et assistance

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Pyramid webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.