Rexel Mercury 2100922 Heavy Duty Stapler User Manual

Introduction

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Rexel Mercury 2100922 Heavy Duty Stapler. Please read this manual thoroughly before using the stapler to ensure proper function and longevity of the product.

Consignes de sécurité

• Keep fingers clear of the stapling mechanism during operation to prevent injury.
• Use only Rexel Mercury staples or equivalent heavy-duty staples recommended for this model to avoid jams and damage.
• Do not attempt to staple materials thicker than the maximum capacity of 120 sheets (80 gsm paper).
• Tenir hors de portée des enfants.
• Do not disassemble or modify the stapler. Refer servicing to qualified personnel.

Contenu du colis

Lors du déballage, veuillez vérifier que tous les articles sont présents et en bon état :

• 1 x Rexel Mercury 2100922 Heavy Duty Stapler (Silver/Black)
• 1 x Pack of 400 Rexel Mercury Staples

Produit terminéview

The Rexel Mercury 2100922 is a high-quality, robust heavy-duty stapler designed for stapling large volumes of paper, from 20 up to 120 sheets, using a single staple size. Its durable metal construction ensures reliability for demanding office, home, or school environments. Key features include a jam release mechanism and an adjustable paper insertion depth for versatile use.

Figure 1 : Côté view of the Rexel Mercury 2100922 Heavy Duty Stapler, showcasing its ergonomic design and silver/black finish.

Installation

1. Chargement des agrafes

1. Ensure the stapler is on a flat, stable surface.
2. Locate the staple loading button, typically at the rear or side of the stapler. Press this button to release the staple magazine.
3. Pull the staple magazine out until it locks in the open position.
4. Insert a strip of Rexel Mercury staples into the magazine, ensuring the staple points are facing downwards.
5. Push the staple magazine back into the stapler until it clicks securely into place.

Figure 2: Detail of the staple loading area, showing the push-button release and magazine slot.

2. Adjusting Stapling Depth

The stapler features an adjustable paper insertion depth from 12 mm to 56 mm, allowing for flexible stapling positions on your documents.

• Locate the adjustable paper guide on the base of the stapler.
• Slide the guide to the desired depth. Markings are usually provided to indicate common stapling depths.
• Ensure the guide is securely set before stapling.

Opérationnel

1. Stapling Process

1. Gather the sheets of paper you wish to staple, ensuring they are neatly aligned.
2. Insert the paper into the stapler, aligning it against the adjustable paper guide to achieve the desired stapling position.
3. Press down firmly and steadily on the stapler handle until the staple penetrates all sheets and clinches underneath.
4. Release the handle and remove the stapled document.

Figure 3: The Rexel Mercury stapler positioned on a desk, ready for use, demonstrating its application in an office environment.

2. Déblocage

The Rexel Mercury stapler is equipped with a jam release mechanism to ensure smooth operation. If a staple jam occurs:

1. Do not force the handle.
2. Locate the jam release button (often the same as the staple loading button or a separate lever).
3. Press the jam release button to open the stapler mechanism.
4. Carefully remove any bent or jammed staples using pliers or tweezers. Soyez prudent pour éviter les blessures.
5. Close the stapler mechanism securely.
6. Attempt to staple again. If jams persist, ensure you are using the correct staple size and not exceeding the sheet capacity.

Entretien

1. Nettoyage

• Periodically wipe the exterior of the stapler with a soft, dry cloth to remove dust and debris.
• Pour les marques tenaces, un léger damp On peut utiliser un chiffon, puis le sécher immédiatement.
• Ensure no moisture enters the internal mechanisms.

2. Stockage

• Store the stapler in a clean, dry environment away from extreme temperatures and direct sunlight.
• When not in use for extended periods, ensure the staple magazine is empty to prevent potential corrosion or jamming.

Dépannage

Caractéristiques

Garantie et assistance

For warranty information, technical support, or service inquiries, please refer to the official Rexel website or contact your local Rexel distributor. Keep your purchase receipt as proof of purchase.

Pour obtenir de l'aide supplémentaire, vous pouvez consulter le Rexel official website.